Single Stage Vehicle Wash Separator for Commercial Brush Wash

Vehicle Wash Separator W1S60

W1S60 Typical installation.pdf

W1S60 Installation Guide.pdf

Vehicle Wash Separator - Commercial Brush Wash (Single Stage)

Lightweight Rotational moulded HDPE construction. Separates and retains sediment, silt and hydrocarbons from vehicle washdown areas. Single and multistage units available to optimise performance per application. Easy access for emptying and cleaning. Ideal for tool hire depots, car and pressure washers, sports ground equipment wash facilities, fleet maintenance and valeting

Please Note
The waste separated from vehicle washing and cleaning businesses can be classified as 'contaminated waste'. As such there is a duty of care to dispose/recycle this waste responsibly through a registered waste carrier to a suitably licensed facility.

Legislation
Predominantly, vehicle and plant washing removes dirt, brake dust, traffic film residue and oils, all of which will be classified by the Environment Agency as pollutants. Consequently the contaminated waste water from designated washing bays and pads should flow through dedicated channels, gullies, gradients (fall on the surface) and kerbs to a separator where large particles of silt and sediment are retained. In many applications detergents, traffic film removers, degreasants, waxes, polishes and other proprietary cleaners are also used in the process - none of which can be removed in the simple process of separation. As such, the contaminated water must either be recycled, discharged to a sealed system for off-site removal or discharged to a suitable public foul sewer - this will require a consent to discharge from the Environment Agency, local council or sewer provider.

• Product Code: OE
• Colour: Black
• Customer Offloading: Customer Offloading
• Diameter: 2650mm
• Material: HDPE (High density polyethylene)
• Shape: Round
• Tank Use: Below Ground

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.