Grid
List
1 1/2' Drain off Bung
1 1/2'' BSP Drain off Bung
Manufactured from hard, durable plastic the 1 1/2" BSP drain off is fitted to make cleaning and disinfecting of the troughs nice and simple. There are 2 seals (both neoprene) within the base and the cap.
Key Features:
Manufactured from tough weather enduring plastic.
Non-porous plastic vastly reduces bacteria ingress.
Moulded thread.
Removed...
Replacement Fast Fill Trough Float Valve 3/4'
The JFC Fast Flow Valve - Replacement
This replacement valve is manufactured from tough, impact resistant and durable plastic, complete with a brass arm which with its "pinch point" enables the user to adjust the arm and reduce the fill point of the trough. Capable of delivering a high flow rate (up to 34L per minute) to make sure all the JFC fast flow troughs have clean fresh water at...
JFC Low Pressure Ball Valve
JFC Low Pressure Ball Valve
The low pressure ball valve (1/2") is made from tough, durable plastic for the float and brass for the body. The float can be adjusted from two points with a small nut and bolt on the float assembly and a butterfly nut on the arm, this gives the user complete control over the levels the drinker is filled to.
On the DBL4 there is a small nut and bolt where the...
1' Drain off Bung
1" Drain Off Plug
FarmWash Washdown Kit
FarmWash
The FarmWash is designed and built specifically for washing down farming equipment, milking stations and live stock areas, the system is simple to install, even simpler to use, and offers unmatched reliability. The FarmWash is able to draw water from an existing water storage container, well, stream, or rainwater harvesting tank, whichever you have available.
The FarmWash is perfect...
1/2' Drain off Bung
Manufactured from hard, durable plastic the 1/2" drain off is fitted to make cleaning and disinfecting of the troughs nice and simple. There are 2 seals (both neoprene) within the base and the cap.
Key Features:
Manufactured from tough weather enduring plastic.
Non porous plastic fvastly reduces bacteria ingress.
Moulded thread.
Removed cleaned and replaced...
Puncture Proof Wheelbarrow Wheel
Puncture Proof Wheelbarrow Wheel DescriptionThe puncture proof wheel for the JFC wheelbarrow and ATV range is manufactured from high quality painted steel and solid puncture proof rubber tyres. The fixed twin bearing system keeps effort to a minimum an keeps the ride as smooth as possible (terrain depending obviously). The wheel fixes on with a split pin meaning the wheel can be removed and replaced...
6 Ply Wheelbarrow Wheel
6 Ply Wheelbarrow Wheel DescriptionThe Replacement wheel for the JFC wheelbarrow and ATV range is manufactured from high quality painted steel and 6 ply rubber tyres. The fixed twin bearing system keeps effort to a minimum an keeps the ride as smooth as possible (terrain depending obviously). The wheel is fitted with an innertube and simple air valve meaning that it can be inflated quickly. The wheel...
2' Drain off Bung
Manufactured from hard, durable rubber this 2" bung is fitted to make cleaning and disinfecting of the troughs nice and simple. These can be installed either way up to prevent chewing on the bung, or pulling it out from underneath.
Key Features:
Manufactured from tough weather enduring rubber.
Non porous material vastly reduces bacteria ingress.
Removed cleaned...
Replacement ID80 Drinker Float
Replacement ID80 Drinker Float
The ID80 Insulated Water Trough is specifically designed with a generous capacity of 80 Litres / 17.5 gallons. Its innovative construction features two polyethylene walls with a thick layer of high-density polyurethane insulation foam in between. This unique design ensures that the water inside the trough maintains an optimal temperature, even in extreme climatic conditions.
With...
DOF7 Replacement Bung
Manufactured from hard wearing, durable rubber, the 3" drain off (DOF7) is fitted to make cleaning and disinfecting quick and easy. The DOF7 fits into the trough then, with a few turns of the screw top, this squeezes the rubber between 2 stainless steel plates to fill the hole in the trough. The DOF7 can be removed and replaced quick and easily.
Key Features
Hard wearing, durable...
Replacement ID25 Drinker Float
Replacement ID25 Drinker Float
The replacement float for the JFC ID25 drinker is a high-qulaity component that is manufactured using top-notch materials to ensure its reliability and durability.
Specially designed with a capacity of 25 Litres / 5.5 gallons. It features a unique construction consisting of two polyethylene walls with a thick layer of high-density polyurethane insulation foam in...
Replacement ID100 Drinker Float
Replacement ID100 Drinker Float
The replacement float for the ID100 insulated water trough is a reliable and durable component manufactured using high-quality materials. It is designed to provide users with complete peace of mind regarding its performance and longevity.
ID100 Insulated Water Trough is a specifically designed water trough with a capacity of 100L / 22 Gallons. It incorporates a...
Service Kit for ID80 Insulated Trough
Service Kit for ID80 Insulated Trough
The service part kit for the ID80 insulated drinker provides the customer with a complete set of service parts for an overhaul. Manufactured from high quality original parts giving the user complete peace of mind when it comes to servicing.
PLEASE NOTE THAT THE KIT DOES NOT INCLUDE THE FLOATS. These can be purchase separately here from our dedicated replacement...
TWB7-PL Wooden Divider
Wooden Divider for use with the slimline feed wheelbarrow TWB7
Key Features:
Makes a distinct divide in the barrow, so 1 barrow can be used to perform 2 tasks at the same time.