Single Pump CAT 5 Variable Booster Set, 305 Litre

CAT5 Specification Sheet

CAT5 305 Litre Variable pump Data Sheet

305 Litre GRP Break tank with Variable Speed Single Pump CAT5 Booster Set 

The CAT 5 booster set also known as 'Backflow prevention booster set' incorporates a 305 Litre polypropylene break tank complete with a raised ball valve chamber with an AB air gap to WRAS approved regulations. With its simple 'plug and play' installation, it is so fast and easy to install. Fully CAT5 compliant with a WRAS approved GRP storage tank, this tank is the ideal solution for any places where space is a premium, as it can fit on a footprint, as small as 670 mm x 610 mm.

Applications include:

• Laboratories
• Veterinary Surgeries
• Bin Wash down
• Mortuaries
• Abattoirs
• Bib Tap

Technical Specification

• Whisper quiet pump - less than 50bd.
• Pre-assembled for easy installation
• Wet/pressure tested prior to despatch
• Compact design with small footprint
• WRAS approved GRP storage tank
• WRAS approved 3/4" ball valve fitted as standard
• Suitable for single phase 230 volt supply only
• A standard opening offers unobstructed access to the system
• Low water level protection
• Maximum allowable static head is 12 meters

Operation

The CAT 5 Booster set is designed to monitor the system pressure. As the demand increases, the pressure will fall and the pump will start to run until the demand has stopped and the pressure increases. The variable speed option has the advantages of maintaining constant pressure, which reduces running costs and saves energy.

Pump Specification

Stainless steel WRAS approved mulitstage pump complete with variable speed controlled, 230 volt single phase supply.

Controllers

This unit is an energy saving device and has the capabilities to run with a BMS connection.

Tanks Direct also supply variable domestic & commercial twin and triple pumps, please contact us on 01643 703358.

Delivery

All our Booster Stes are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.

If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.

• Product Code: DPT
• Customer Offloading: Customer Offloading
• Delivery: Free Delivery
• Material: GRP
• Shape: Upright
• Twin or Single: Single

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.