Klargester 9,150 Litre Shallow Dig Cesspool
Product Ref: CPH0911A1K
Product Description
Kingspan Klargester 9,150 Litre Shallow Dig Cesspool - Suitable for all domestic applications.
A Klargester shallow dig cesspool provides a reliable solution for locations without mains drainage, where the discharge of treated effluent is not permissible due to unsuitable ground conditions, or where infrequent or seasonal use, such as a holiday home, would prevent the successful functioning, for example of a packaged sewage treatment plant.
- Klargester cesspools provide quality and reliability as they are constructed from non-corrosive materials and are priced competitively.
- Easy to install, with minimal on-site installation time
- Each cesspool is tested to ensure it is watertight and is structurally sound.
- For added safety cesspools can be supplied with a lockable man cover.
- High Level Alarm available
- Constructed from non-corrosive materials in line with BS 6279: 1983 regulations.
Note:
- Tanks have an inlet invert depth of 0.5m as standard.
- Upon request this may be extended up to 1.5m via neck GRP riser pieces.
- Confirm with local building regulations if additional venting is required.
- Concrete back fill is recommended for backfilling the unit
- CPH028, 038, 048 & 057 are available with 160mm pipework.
- CPH071 & 091 are available with Ø110mm pipework although Ø160mm is recommended.
Cesspools
Cylindrical cesspools are available with capacities from 2,800 to 79,000 litres. The cylindrical tank allows reduced depth excavation in comparison with the same size of spherical tank, offering considerable savings where ground conditions are difficult or where there is a high water table. Cesspools are designed for storage only, with their contents being emptied at regular intervals using tankers. High Level Alarms with audible and visual warnings are available for all tanks to enable level monitoring for optimum use.
Please note that when sizing a storage tank for domestic properties it must be noted that under the Building Regulations it must have a minimum capacity of 18,000 litres (2 people) under Environment Agency regulations.
When siting units there are a number of factors to be considered. Systems should not be positioned closer than 7 metres to any dwelling and as far as possible from any watercourse, normally not less than 10 metres. Adequate access to tankers for emptying should also be taken into consideration
*This unit is suppied with 1 loose bolt on shaft of either 1 or 1.5 metre invert (specify with order). It must be fitted on site as part of the installation and can be trimmed to suit exact size of invert
Product Details
- Product Code: KLA
- Customer Offloading: Customer Offloading
- Diameter: 1920mm
- HIAB Available: HIAB Available
- Material: GRP
Delivery
Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.
Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland
Our lead times should only be used as a guide and are subject to change.
Offloading
Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.
We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.
HIAB
HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.
If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.
Returns Information
Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.