IBC Container 1000 Litre, Tote Tank, Steel Pallet, UN Approved, TDIBCST

1000 Litre IBC (Intermediate Bulk Container). IBC (TOTE) containers made from strong durable blow moulded HDPE high-density polyethylene. UN approved.

Frame:-
Galvanised mild steel
Large 'Ticket' identification plate above valve outlet, Large documentation plate on back (opposite side to valve) 4 way entry galvanised mild steel perimeter pallet
Dimensions 1200 x 1000 x 1160mm

Inner Container:-
1000 Litre light duty blow moulded High Density Polyethylene bottle
Litre/Gallon markers to indicate the amount of liquid within the tank

Fittings:-
50mm integral butterfly valve, inner seal ETFE, with S60 x 6 male thread and screw cap
150mm top centre screw cap with TPE seal, pressure vent and rain cap

Please note all fittings are sent out separately and not with the tank

UN Certified for packaging groups II & III to a maximum SG of 1.6

Water tanks can be extremely hazardous when transporting large volumes of liquids. Please make sure that they are installed and secured by a suitable qualified person before transportation.

IMPORTANT SAFETY MESSAGE - These tanks are suitable for most Non Hazardous materials.
**Please note you will also need the S60x2"Fem BSP+Seal if you want to bush down to 1"

• Product Code: PE
• Colour: Natural
• Lid Size: 150
• Outlet Size: S60 x 6 male thread

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.