Absorbent Pads (Maintenance)

Technical Documentation

Absorbent Pads (Maintenance)

Supplied in packs of 200, our Active Maintenance Absorbent Pads are manufactured from a base of highly absorbent melt blown polypropylene. The melt blown fibres are then ultrasonically bonded, creating a dimpled surface. This bonding creates a reduced linting product with improved tensile strength.

Our Active maintenance absorbent pads are 100% melt blown polypropylene and are hydrophilic and are suitable for most common industrial liquids including oils, coolant and solvent based spills.

Our Active maintenance absorbent pads are colour coded to the BSIF Standards for easy recognition.

Our Active maintenance absorbent pads are:

• Manufactured from melt blown polypropylene
• Ultrasonically bonded to reduce linting and improve tensile strength
• Excellent absorbency and fluid retention
• Absorbency tested to BS7959-1:2004
• Can be incinerated, keeping disposal costs down
• Highly visible due to their distinctive colour
• Grey colour hides dirt.

Active maintenance absorbent pads can be used in a number of ways, including:

• Under dripping machinery
• On oily ledges
• Around machinery where traffic is light
• Keep handy for immediate use
• Supplied in plastic pack for damp areas

Specification:

• Dimensions - 520mm x 400mm 
• Weight - 8Kg
• Absorbency - 66–131 Litres

• Product Code: KSP
• Delivery: Fast Delivery
• Shape: Rectangle

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.