3/4' Aylesbury Keraflo K Type SF, Delayed Action Float Valve, 20mm

3/4' Aylesbury Keraflo K Type SF, Delayed Action Float Valve, 20mm Description

Aylesbury Keraflo K Type Standard Flow 3/4' (20mm) Delayed Action Float Valve





Benefits of Keraflo''s Aylesbury Float Valve Range:


Maintenance Free


Designed to operate for long periods without maintenance.


Backsiphonage Protection


'Up and Over discharge' to BS1212 part 2


helps to facilitate Air Gap compliance.


Extended Durability


Non-wearing ceramic disc seal in a DZR brass housing


Virtually Indestructible


The heart of the valve incorporates pressure compensated rotating ceramic discs which are aligned in the open position.


Revolutionary Shaped


Puncture Proof Float, made from Polyethylene closed cell foam which is CFC free air retardant and chemically and biologically inert.


This radical design virtually eliminates stress on the tank wall fixing point.





Water Pressure: Suitable for 0 -10 Bar.


Temperature Range: 1 - 60 ?C.


Ideal for pumped systems


Reduces Legionnaire risk


Saves energy with positive pump control


No valve bounce


Maximises tank capacity


No dribble


No water hammer


Full flow during fill





Aylesbury ''K' Type


Delayed Action Float Valve


Non adjustable opening / closing operating differential approximately 75mm


Suitable for tanks without raised valve chambers


The weighted key-shaped float which is supplied with Aylesbury ''K' Type float valves can be accurately set in a number of positions on the brass float arm, actuating the valve at a predetermined difference in water level, driving it fully open or fully closed without water hammer. This positive action avoids dribble, reduces noise and allows full flow until the selected closed level is reached. Inherent in the design is a non-adjustable operating differential in water level between opening and closing of approximately 75mm. Also available in stainless steel for use in demanding environments such as desalination plants and sea water.

• Product Code: PW
• Delivery: Fast Delivery
• Outlet Size: 3/4" BSP Male
• Stock tank: Non Returnable Product

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.