1125L Road Tow Animal Watering Bowser with Trough

Chassis:

This bowser is constructed from 80 X 80 R.S.A. fully welded with a ‘T’ frame drawbar, all fully hot dipped galvanised.

Axle/Suspension:

Avonride rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. 4 Stud 5 1/2″ pcd hubs.

Wheels & Tyres:

2 no. 185 x 13 8 ply commercial van tyres.

Coupling:

Knott-Avonride auto reverse coupling fitted with 40mm eye or 50mm ball, break away cable and parking brake lever.

Tank:

Polyethylene moulded tank elliptical in section, baffled & fitted with an 18” lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps. 1 rear tap fitted, 2” bottom drain underneath rear of tank. 2 rear outlets.

Ancillary Equipment:

This bowser comes with a range of ancillary equipment including, moulded mudguards, mud flaps, front telescopic jockey wheel, Side reflectors, rear lighting board c/w 13 pin plug.

1125L Road Tow Animal Watering Bowser with Trough

We're proud to present the 1125Litre Animal Watering bowser from Trailer Engineering. This is the Road tow version meaning this is specially designed to be towed happily across the fields to where it is needed most as well as along the road, with it's fully welded and galvanised frame and the 15 inch tyre rims give great ground clearance to help. 

Every trailer that leaves the factory is built to the highest of standards to ensure the reliability and durability of the trailer. This water trailer has a single axle for more ground clearance when towing over rough terrain and is fully certified to be towed on public roads. Animals such as sheep, cows, deer and horses would have no issues drinking from the bowser.

It's also fitted with drop stand at the back to ensure stability and no tipping when the animals are drinking. The trough itself is selffilling with a ballcock installed which controls the filling mechanism. 

The trough itself measures 1193mm x 482mm x 280mm Capacity with a capacity of 136 litres (or 30 gallons).

• Product Code: TE
• Agri: Cow, Goat, Sheep
• Customer Offloading: Customer Offloading
• HIAB Available: HIAB Available
• Material: MDPE

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.