Submersible Water Pump, X-AJE 80 Pro

Submersible Water Pump - X-AJE80PRO

A high quality automatic centrifugal jet pump with a stainless steel motor body. Fully waterproof, submersible and self priming pump which is ideal for domestic and garden clean water supply.This pump can operate either totally submerged or externally connected to a water tank or above ground water butt. This pump is typically used in light commercial situations.

The expert build quality of the pump includes steel bearings in brass mounting, ceramic-graphic seals, reliable electronics, and strong internal components, creating extra longevity and durability against heat/frost. Unlike air and oil cooled pumps, which can warm up quickly in hot rooms and sunny positions, increasing susceptibility to stress and fatigue, this Submersible pump stays cool as the water that it is pumping and can be run in water, out of water or partially submerged.

This is a clean water pump which means that collected rainwater needs to be filtered before it enters the pump.

Specifications

Pump Body: Stainless Steel Aisi 304
Motor Body: Stainless Steel Aisi 304
Rotor Shaft: Stainless Steel Aisi 420
Supporting Flanges: Brass
Impeller, Diffuser and Venturi: Noryl
Electrical Cover: Stainless Steel Aisi 304
Mechanical Seal: Ceramic/ Graphite
Other Seals: NBR70
Nominal Power: 0.8HP/0.6 KW
Current (Amps): 1 - 230v - 4.5
Inlet: 1"
Oultet: 11/4"
Pumped liquid temperature: +2 Degrees C to +37 Degrees C (18 to 70 Farhenheit)

Delivery

All our Submersible water pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.

If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.

• Product Code: 3P
• Customer Offloading: Customer Offloading

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.