PIR Flush Mount Senso, 230VAC
Product Ref: PIRFLUSH230V
Product Description
PIR Flush Mount Sensor (230VAC)
A PIR (Passive Infrared) sensor detects changes in the amount of infrared radiation, which varies depending on the temperature and surface characteristics of an object in front of it. This ensures that water is only supplied when required, therefore preventing minor water leaks from accumulating into large amounts of waste water.
When an object, such as a human, passes in front of a different background (such as a wall) the temperature at that point in the sensor's field of view will rise.
The sensor converts the resulting change into an output voltage, and this triggers the detection. When the PIR is linked to a solenoid valves installed on the incoming water suppliers, water can only flow when the WC area is occupied.
Technical Specification:
- Voltage - 230V Ac 50Hz
- Range - 6m Diameter at 2.5m High
- Detection Angle - 360°
- Max Switch Load - 2000W Halogen/ 500W Fluorescent
- Time on adjust - 5 Sec - 18 mins
- Protection - IP44
Features
- Up to 6 Valves can be connected to a single PIR sensor
- Multiple PIR sensors can be connected to a single valve
- Discrete flush mount PIR sensors
- Designed for WC areas
- Meets the requirements of BREEAM WAT03 flow control
Delivery
Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.
Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland
Our lead times should only be used as a guide and are subject to change.
Offloading
Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.
We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.
HIAB
HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.
If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.
Returns Information
Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.