BOTTOM OUTLET KIT
BOTTOM OUTLET KIT (Oil Tank Fitting Kit)
This kit includes practically everything you need to connect your heating oil tank to the supply pipe.
INCLUDES THE FOLLOWING:
Isolation ball valve
52 micron disposable nylon filter element
10mm copper compression fitting outlet
1" male BSPT tank fitting adaptor
Roll of PTFE tape
Oil Tank Filter Maintenance Kit
Oil tank filter kit
ATLAS KEYS
Otherwise known as the ' 196 Key ' - this will suit the Atlas/Titan front stule lid locks.
These will come in a pair.
19'' Retrofit Green Screw Cap
19' RETROFIT GREEN SCREW CAP
19 inch retrofit lid includes sealant lid
FUELMASTER & TRUCKMASTER LOCK
Lock for all Titan FuelMaster and TruckMaster tanks.
Will come with a set of keys as standard
2'' OFFSET FILLER CAP
2'' cap used on the offset fill-point.
This is a standard part right across the Titan range.
Cap can also be purchased as part of a complete offset fill-point (0019606)
8'' Oil Tank Lid
8 Inch lid (c/w bar and pin) for old oil tanks
The 8” cap lid only fits very old (obsolete) Tyrrell tanks, it can be used for similar sized tank necks but some modifications may be required.
ATLAS 16' OIL TANK LID BLUE
ATLAS 16" OIL TANK LID BLUE
Replacement lockable 16" lid (approx. dimension) for ATLAS bunded oil tanks only. 16" diameter manhole lid 'Quarter Turn' style Manhole Access Point.
Supplied complete with:
Lockable Plastic Manhole Lid
Retention Ring
Weatherproof Gasket
18' - Deso or Atlas BLACK LID (New Style)
Replacement lockable 18" lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
New Style; operated by silver key - Will fit ALL NEW BUNDED Tanks
Please Note: These lids are not interchangeable between old & new tanks
ATLAS 6' OIL TANK LID
ATLAS 6" OIL TANK LID
Replacement 6" (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only
Fits onto the tank inspection point/inlet.
TITAN 16' HINGED OIL TANK LID GREEN
Replacement 16'' (approx. dimension) oil tank lid for TITAN oil tanks only. Old style green arm hinged lid.
Includes the gasket 0000325.
This lid is for the older Titan bunded tanks (pre 2004/2006 approx.)
TITAN 19' OIL TANK LID
Replacement 19''(approx. dimension) oil tank cap lid for TITAN oil tanks only.
This lid is for the newer Titan bunded tanks (after 2004/2006 approx.)
TITAN 24' OIL TANK LID
Replacement 24'' (approx. dimension) oil tank lid for TITAN oil tanks only.
TITAN 4'' OIL TANK LID
TITAN 4'' OIL TANK LID
Replacement 4'' (approx. dimension) screw cap for TITAN bunded oil tanks only. Fits onto the 4'' tank inspection point/inlet (old Style).
Please Note:
Only the lower rubber seal is included in this product.
LOCKING LOOP & NUT
This locking hoop and nut can be used for all tanks within the Titan range.
LID LOCKING STUD
Button lock for 19'' Titan Oil Tank Lid and 6'' Titan Oil Tank Inspection Cap.
OFFSET FILL ASSEMBLY COMPLETE
2'' offset fill-point which can be used across the range of Titan oil tanks and any other type of plastic oil tank.
This comes complete both gaskets, aluminium locking nut and the offset cap.
TITAN 1/2' BALL VALVE
This ball valve can be used across the entire Titan tank range. (1/2'' connection for tank pack)