KSB Ama Drainer 301 SE/NE Submersible Drainage Pump

Ama Drainer 301 Data Sheet

Ama Drainer 301 Data Sheet

Ama Drainer.pdf

KSB Ama Drainer 301 SE/NE Submersible Drainage Pump

The Ama Drainer 301 SE/NE is a 1¼'' submersible treated effluent water pump which is suitable to clear effluent containing solids of up to 10 mm.

Fully floodable, vertical, close-coupled single-stage submersible motor pumps, IP 68, with or without level control, for a maximum immersion depth of 2 m.

Features

Technical data

• Flow rate Up to (2.75 l/s)
• Head Up to 6 m
• Temperature Up to 50 C
• Free passage Up to 10 mm
• Supplied with a 2 pin European plug which can be removed and will not affect the warranty  
• 10m Cable provided

Applications

• Drainage of pits, shafts, yards and cellars subject to a flooding risk
• Extraction of water from rivers and reservoirs
• Drainage of underground passages
• Lowering the surface water level
• Magnetic switch with adjustable, variable level control and anti-over winding device
• Straightforward adaptation to external control system with locking disc.
• Easy to replace cable with plug-type connector
• No drainage of the discharge pipe with the Integrated swing check valve
• Vertical discharge nozzle allows installation in narrow sumps
• Protected against overload which grants Integrated motor protection
• High operating reliability with the triple shaft seal lubricated by the barrier fluid makes for high motor reliability. Lubrication of the seal faces in the event of dry running.
• Long service life with the low-weight design and corrosion-proof thanks to high-quality plastic casing. Noise-absorbing, abrasion-proof and impact-resistant.
• Economic operation optimised the hydraulic systems and motors for large pump output at high efficiency
• Frame-cooled enclosed motor. Permits operation even when motor is not submerged and is protected against overheating, however not advised as a conscious method of operation

Delivery

All our Submersible pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.