Kingspan Ultrasteel 120 Litre Indirect - Slimline Unvented Hot Water Cylinder

Direct is where the heat comes from an electric immersion heater whereas the Indirect heat source uses the heat from a boiler.

Kingspan Unvented Cylinder Servicing Homeowners Guide

Kingspan Manual Unvented Cylinder External Expansion

120 litre Indirect Kingspan Albion Ultrasteel Slimline Unvented Cylinder - AUI120SLMERP (AUI120SLM)

At just 478 mm diameter, these Indirect cylinders are the ideal solution for those installations where space is limited, and a small footprint is essential.  The cylinders heat up quickly via the coil heat exchanger with heat supplied from a conventional gas or oil boiler. They also feature a 3 kW backup immersion heater, which can act as a boost or a secondary heat source.

Ultrasteel cylinders deliver high flow rates and mains pressure hot water (regulated up to 3 bar) for powerful showers and the fast filling of baths or sinks, making them ideal for homes with multiple bathrooms or extra utility rooms. Manufactured from high-grade engineering materials, such as 'Duplex' stainless steel, for superior corrosion resistance.

Indirect models are designed to heat up quickly using the coil-in-coil heat exchanger with the heat supplied from a conventional gas, oil or electric boiler. They also feature a 3 kW backup immersion heater, which can act as a boost or a secondary heat source.

Package includes:

• Inlet Control Set
• Temperature & pressure relief valve
• 15 mm/22 mm Tundish
• 12 Litre expansion vessels
• 1x 3kW Standard Immersion Heater
• Two port valves
• Dual thermostat
• Product Manual including Benchmark log

Features and Benefits of Kingspan Albion Ultrasteel Hot Water Cylinders

• 50 mm CFC & HCFC-free foam insulation for low heat loss
• Economical to run with minimal maintenance and no hidden costs
• Factory fitted temperature & pressure relief valve
• 22 mm compression connections
• High quality inlet control set with balanced cold

Delivery

All our Cylinders are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.

If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.

• Product Code: KSPC
• Customer Offloading: Customer Offloading
• Delivery: Free Delivery
• Diameter: 550mm

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.