Invicta Skip Compactor - Choice of 2 Sizes

• Position the forks to the correct distance apart to locate into fork pockets.
• Remove the safety lynch pin and fork pocket heel pins.
• Drive the forks fully into the fork pockets.
• Insert fork pocket heel pins directly behind the heel of the fork and attach safety lynch pin into hole provided.
• Remove Height Adjustment Pin in the main vertical box section so as to adjust compactor height to suit waste/skip height.
• Once desired position is achieved insert the Adjustment Pin into the aligned holes and attach safety lynch pin into hole provided.
• The attachment is now ready for use.

Invicta Skip Compactor - With a choice of 2 Sizes

The Fork Mounted Skip Compactor is designed to achieve optimum skip capacity. Waste is usually deposited into the yard skip and taken away once full. However, in most cases the skip is 30-45 percent full of fresh air. The Skip Compactor, filled with ballast, significantly reduces this and subsequently reduces the number of collections required and money spent in doing so.

Standard Features

• Adjustable height to suit up to 8 foot deep skips
• Heel pin locking for the safe attachment to forklift truck
• Robust and sturdy construction
• Painted bright orange for safety
• Filled with a mixture of 10mm Pebbles and crushed sandstone

• Product Code: INV
• Delivery: Fast Delivery, Free Delivery

• The Fork Mounted Skip Compactor should be inspected weekly for general condition with particular attention paid to: A – All weld points, B – Wear and distortion of Fork Pockets, Adjustment Pin and Heel Pins, C – Any damaged/worn components.
• Damage or failure must be reported and rectified immediately prior to re-use of the attachment.
• General surface rusting especially in the critical areas should be treated with proprietary inhibitors, primers and paint on a regular basis.

• The Manager of the department or section where the compactor is to be used must be responsible for ensuring the operators are fully conversant with the unit, its operation and maintenance.
• Ensure that the heel pins are correctly inserted, retained and positioned in relation to the heel of the fork prior to each and every use.
• Do not drive into the fork pockets without removing the heel pins.
• Always travel with the Compactor in its reduced position.
• Ensure that the Adjustment Pin is retained in position with the Lynch Pin prior to each and every use.
• Do not travel with the Compactor over rough terrain or carry out excessive cornering.
• Do not shock load the truck/compactor under any circumstances.
• Never exert lateral forces against compactor body.

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.