Invicta Hydraulic Sweeper/Collector Attachment

1. Align forks with fork mounting boxes.
2. Enter attachment until fully engaged and secure with provided retention pins.
3. Raise forks to mid float position.
4. Switch off prime mover – take out of gear and engage handbrake.
5. Attach hydraulic supply ensuring the connections are clean.
6. Before operating, ensure all by-standers are clear of the machine.
7. The attachment is now ready for use.
8. Refer to operation manual for full details before commencing use.

Invicta Hydraulic Sweeper/Collector Attachment - Various Size Options

The Hydraulic Tele-Sweeper is a cost-effective addition to the versatility of your telehandler forklift. By simply driving your forklift forks into the floating fork points and connecting to the Forklift’s Hydraulics, it sweeps the most arduous environments in a fraction of the time than conventional methods. The large debris container is opened hydraulically from within the safety of the Forklift Cab.

Please note: Due to the variety of potential coupling on the intented forklift the sweeper is supplied with capped ends only.

Standard Features

• Hydraulic drive supplied with hoses
• Gravity Water System (250Ltr Polypropylene tank)
• Fully enclosed collection hopper
• Fully floating body for optimum performance
• Heavy-duty impact resistant wheels
• Heavy-duty poly ultra-brush 560mm diameter
• Hydraulic Requirement 40-60 LPM @ 200 BAR
• Fork pockets with heel pins for safe mounting

Optional Features

• Pressure Water System (250Ltr Polypropylene tank)
• Kerb Brush

Available Models

• Product Code: IHSC
• Customer Offloading: Customer Offloading
• Delivery: Fast Delivery

1. The should be inspected weekly for general condition with attention paid to:
A – All weld points
B – Wear & distortion of thumb screws.
C – Any damaged components
D – Lock & latches
E – Pivot points
2. All bolts must be checked for tightness.
3. Damage or failure must be reported and rectified immediately prior to re-use of Sweeper.
4. General surface rusting especially in the critical areas should be treated with proprietary inhibitors, primers and paint on a regular basis.
5. This product is certified for six (6) months from the date of manufacture after which it is the customer’s responsibility to have the product re-tested at an approved testing facility or inspected and logged in a register by a competent person as advised by the HSE.

1. The manager of the department or section where the attachment is to be used must be responsible for ensuring the operators are fully conversant with the attachment, its operation & maintenance.
2. Ensure both the crane and attachment can handle the intended load and its contents.
3. Operators must keep clear of the mechanism whilst in operation.
4. Do not shock load the attachment under any circumstance.
5. In the event of failure during operation do not attempt rectification or re-operation while the attachment is off the ground. The attachment must be returned safely to floor level for inspection.
6. Never drive at the product at an excessive speed as this may result in injury to the driver and/or damage to the attachment and Fork Lift Truck.
7. Keep hands away from all moving parts.

The Operator should ensure that the above product is used for the purpose that it has been designed, tested and intended to do and no deviation to this occurs. If in doubt, consult your crane dealer or approved attachment supplier.

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.