Horizontal Sewage Pump Station, Twin Pump, 20,000 litre tank

Pump Station Commissioning

• Full system inspection
• Levels inspection
• Manway check for obstruction
• Mount control panel (if not in place)
• Check correct load to panel
• Check correct cable size
• Check correct power supply
• Set the overloads
• Lower pumps via guide rail onto stools using an A-frame if required
• Pull pump cables through ducting
• Pull float cables through ducting
• Set floats to correct operating position
• Wire cables into control panel
• Fill system with water
• Full test of pump station
• Sign-off and certification
• Warranty and documentation provided

Horizontal Sewage Pumping Station 20,000 Litres

The Horizontal Sewage pumping stations are a range of packaged pump stations which are designed to collect foul or surface water from multiple properties or large commercial buildings.

This made to order systems, can be manufactured to suit site specific requirements, such as taller turrets to pick up deeper incoming drains, and also precise measurements for the inlet depths can be pre-cut if required. If this is required, please contact us for more details

All you need is supplied to you within the package, including all internal pipework, 2 sewage pumps and twin control panel and float switches. Our range of pumping stations is of a superior design and quality, to meet with BSEN75.6 requirements.

Delivery

All our Horizontal Sewage Pump Stations are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.

If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.

• Product Code: DPT
• Customer Offloading: Customer Offloading
• Delivery: Free Delivery
• Material: GRP
• Tank Use: Sewage
• Twin or Single: Twin

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.