Ebara Best One MS Automatic Sump Drainage Water Pump - Float Switch - 230v

Ebara Best One Datasheet

Ebara Best One MS Automatic Sump Drainage Water Pump - Float Switch - 230v

The best one MS submersible electric pump is for clean & dirty water, it can be used in multiple applications including draining, garages, basements, cellars, or any other places that are subject to flooding. Also, it can be used to supply water to garden fountains and be used for easy emptying of large tanks and reservoirs. 

It is a popular, high quality submersible drainage pump with a magnetic float switch allowing it to operate automatically in sumps as small as 200x220mm. These pumps are fully protected, so they can be permanently submerged and are a highly reliable choice for domestic installations. The BEST ONE MS version has the following features:

• 5m power cable, suitable for external installations
• Ability to handle solid particles up to 10mm in diameter and dirty water
• Full IP68 electrical protection enabling the pump to be permanently submerged in water
• Stainless steel body to prevent corrosion and ensure long service life
• Ebara BEST ONE MS Automatic operation allows the pump to be used for draining basements, garages, cellars or anywhere that is prone to flooding
• Continuously rated motor which means the pump is suitable for use in garden fountains and water features
• Lightweight and easy carry handle enables the pump to be used for emptying tanks and reservoirs
• Installation Guide - Borehole diameter 200x220mm - water levels: pump off 100mm & pump on 170mm

The Ebara BEST ONE MS is the market leading domestic and light commercial submersible drainage pump in the UK. Ideal for pumping cellars, dewatering ground, pumping floodwater, and pumping septic tanks. Standard versions can pump solids with a maximum diameter of 10mm. Vortex impeller versions can pump solids up to 20mm in diameter. Versions are available with and without an integral float switch - 'M' versions are without, 'MS' versions have a magnetic float switch and 'MA' versions have a standard float switch for automatic operation. Vortex impeller versions have the designation 'VOX'.

• Has a standard mechanical seal
• Optimised pump
• Maximum immersion of 5m
• Maximum temperature of liquid - 50C 
• Discharge connection 1 1/4 inch

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.