4' Equilibrium Straight Arm Float Valve with float

document.1172.pdf

document.1172.pdf

4' Equilibrium Straight Arm Float Valve with float Description

Float Valve Equilibrium Straight Arm 4" c/w float

Standard valve with float to suit fitting into the tank body to provide conventional air gap arrangement (AG or AF).


Equilibrium Float Valve

A range of quality high flow rate Float Valves which are simple and robust and can reliably self compensate for changes in water supply pressures. One size of seat and one size of ball float will suit any working pressure up to the maximum recommendation of 5bar. Even at these pressures the seat combined with the hydraulically balanced closing action gives fast, quiet and smooth shut-off.

Valves are available in 1/2" to 4" sizes with BSP male threaded inlet stub.



These valves are available in two ranges:

• Standard valve with float to suit fitting into the tank body to provide conventional air gap arrangement (AG or AF).
• Standard valve with the addition of a brass threaded drop arm to allow the valve to be fitted into a raised float valve housing c/w spill over weir slot, to provide an AB or AA air gap to suit systems where category 5 water is present.

All Equilibrium float valves are supplied with a high quality copper float.

Materials

• Body: Gunmetal
• Lever arm: DZR Brass
• Lever arm claw: Gunmetal
• Ball Float: Copper
• Back nut: Plastic, Brass or Gunmetal
• Benefits-Available in full bore configurations to suit pressures up to 5 bar (75psi) whilst still maintaining a fast, quiet and smooth shut off action.
• Available with male BSP threaded connections to suit most connection situations.
• The body of the valve is made from corrosion immune Gunmetal giving years of trouble free service



 

Please note this size is to special order

• Product Code: PW
• Outlet Size: 4" BSP Male
• Stock tank: Non Returnable Product

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.