3400 Litre Underground water storage tank

document.1220.pdf

document.1220.pdf

document.1247.pdf

3400 Litre Underground water storage tank

UK Manufactured, Made from high strength PE, Rota-moulded-single piece, Concrete backfill not usually required

A "fitted' tank means the pipe-work (calmed inlet, filter and connectors) within the tank and spigot connections are pre-installed. The telescopic lid (aka neck & lid) are normally separated to avoid damage during transport. It''s a push fit job to get it to fit onto the tank neck. There is a rubber seal towards the bottom, which ensures a tight fit. The telescopic part is then pulled up to the required level and the backfill supports this extension. It is also good practice to run a bead of silicon around the inside, where the upper part slides over the lower part.

Designed for all standard in-tank filters. Polyethylene underground water harvesting tanks for use in industrial, commercial and domestic schemes. Suitable for Potable or non potable water. The tanks are manufactured in the UK and are available in a wide range of sizes. Made from virgin polymer. This range of UK-Manufactured underground water tanks has been scientifically designed to maximise strength whilst minimising their carbon footprint. The water tanks are suitable for any application that calls for underground storage of water or other non-corrosive liquids. Tanks are rotary moulded from high-quality polyethylene in the UK, minimising their transportation environmental impact. Tanks are designed so that they typically reduce the depth of dig by around 500mm compared to their conventional equivalents. 

Options and Accessories
Telescopic neck and 600mm diameter dome
The telescopic neck 520mm - 820mm (can be extended by up to 300mm) and can be tilted in any direction by up to 5 degrees.
All tank sizes come with at least one generously sized 600mm diameter tank dome designed to take a range of filter and pump configurations.

Delivery 3 weeks special order

*Deliveries please note it is the customers responsibility to ensure safe, adequate access, turning space and provide their own off loading facilities. Off loading of heavy items should be made by fork lift or similar heavy lifting equipment. If there is any doubt about delivery access or off loading please contact us to discuss the options available.*

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.