1125 Litre Highway Pressure Washer, 140 Bar

1125 Ltr (250 Gallon) 140 Bar Highway Pressure Washer

Industrial highways pressure washer. Industrial Water bowser for the transport and storage of drinking water. Road bowsers are primarily for high speed operation on the road full or empty at speeds up to 60MPH, they can be towed off road at slower speeds, they are fitted with either a 40mm ring eye or a 50mm ball coupling. Chassis Constructed from 80 x 80 R.S.A. fully welded with a 'T' frame drawbar, all fully hot dipped galvanised to B.S. standards. Axle/Suspension Avonride rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. Wheels/Tyres 2 No. 175 x 13 8 ply commercial van tyres on 4 stud 5.1/2" PCD rims. Coupling Knott Avonride auto reverse coupling fitted with 50mm ball or 40mm eye, break away cable and parking brake lever.

Tank Polyethylene moulded tank, Elliptical in section, baffled and fitted with an 18" lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps. 1 rear tap fitted, various outlets, 2 rear and 2" drain. Ancillary Equipment Moulded mudguards, mud flaps, front telescopic jockey wheel, side reflectors, rear lighting board c/w 13 pin plug. Rear prop-stand options. Finish Poly tank in yellow, green, red or blue. Drinking water blue tank only. Galvanised chassis.

Optional (extras)  - Male hydrant connection under manlid.
Finish - Tank in drinking water blue approved poly. Chassis galvanised
Chassis - Constructed from 70 x 70 R.S.A. fully welded with a 'T' frame drawbar, all fully hot dipped galvanised.
Axle/Suspension - Avonride rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. 4 stud 5½" pcd hubs
Wheels and Tyres - 2 no. 185 x 13 6 ply commercial van tyres on 5?" pcd 4 stud rims.
Coupling - Avonride auto reverse coupling fitted with 40mm eye or 50mm ball, break away cable and parking brake lever
Ancillary Equipment - Moulded mudguards, front telescopic jockey wheel, rear lighting board.

Tank

Elliptical in section, baffled and moulded from polyethylene and fitted with an 18" lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps.1 rear tap fitted , 2" bottom drain underneath rear of tank .Inner anti surge baffle.

Pump

Honda GX 160 Hand Start Petrol Engine driving a 140 Bar (2000psi),10 lpm piston pump c/w hand lance and 7m of hose stowed on bracket.

Finish

Tank moulded in yellow polyethylene. Chassis galvanised

Delivery

All our bowsers tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.

Delivery is made either by a Luton lorry or Artic Lorry. Please inform us at the point of order, if access is restrictive for delivery.

If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.

• Product Code: TE
• Customer Offloading: Customer Offloading
• Material: MDPE
• Shape: Horizontal

Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

Our lead times should only be used as a guide and are subject to change.

Offloading

Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

HIAB

HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Tanks Direct's return policy now.