Kingspan Range Tribune HE 120 Litres Unvented Vertical Pre-Plumbed Indirect Hot Water Cylinder
Product Ref: TI120PT4ERP
Whats the difference between Direct and Indirect C
Direct is where the heat comes from an electric immersion heater, whereas the Indirect heat source uses the heat from a boiler.
Product Description
Kingspan Range Tribune 120 Litre HE Unvented Pre-Plumbed Indirect Hot Water Cylinder
Kingspans trusted Tribune HE range is available in sizes up to 300 Litres. Manufactured from superior quality duplex stainless steel
Package includes:
- Inlet control set with balanced cold
- Acetal tundish
- Temperature & pressure relief valve
- Potable water expansion vessel
- Immersion heater
- Two port valves
- Dual thermostat
Features and Benefits of Kingspan Range Tribune HE hot water cylinders
- Pre-Plumbed cylinders make it 2 times faster to install and installation is consistent from house to house
- Mains pressure hot water (regulated up to 3 bar) for powerful showers
- Good flow rates for fast filling of baths, ideal for multiple bathrooms
- Low heat loss and low reheat times due to insulation
- Stainless Steel inner vessel for superior corrosion resistance
- Advanced coil-in-coil heat exchanger design for optimum heat transfer
- 25-year warranty on Duplex inner vessel
- 2 Years warranty on parts
Model | TI120PT4ERP Pre-Plumbed Indirect 2 |
Nominal Capacity | 120 Litres |
Height (mm) | 930 |
Diameter (mm) | 550 |
Rating | C |
Standing Loss (W) | 54 |
Delivery
All our Cylinders are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.
If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.
Product Details
- Product Code: KSPC
- Customer Offloading: Customer Offloading
- Delivery: Free Delivery
- Diameter: 550mm
Delivery
Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.
Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland
Our lead times should only be used as a guide and are subject to change.
Offloading
Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.
We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.
HIAB
HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.
If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.
Returns Information
Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.