4000 Litre GRP Pump Enclosure with built in Tank, CAT 5 AB air gap

 

Product Ref: CU3.4000AB

Customer Offloading GRP Potable Made to Order, Non Returnable Product Made to Order, Non Returnable Product Yes
  • Volume: 5500ltr
  • Dimensions: L:3600mm W:2000mm H:2250mm
  • Custom Delivery Required

    Delivery price on application.

    updown
    from £11,450.00 ex VAT
    (£13,740.00 inc VAT)
    monduB2B Pay Later & Instalment OptionsLearn more

    Product Description

    GRP Tank Combination Unit 4000 Litre, CAT 5 AB air gap

    The unit is designed as a single piece item with an internal dividing wall at full height. One internal section being the wet compartment for the stored water which is accessed via a lid mounted lockable manway. Beyond the internal dividing wall is the dry side where the booster set is to be positioned. The internal dividing wall has the inlet and outlet connection within it, the overflow, warning pipe and screened spill over weir terminate through the wet side wall to outside and do not therefore normally require any additional pipework. The dry side is accessed by a large 1600 x 1600mm hinged and lockable door, which is fitted with louvered vents to ensure adequate ventilation.

    If chosen with the Foundation Skid the whole unit is mounted and fixed too a fully welded galvanised steel skid which allows offloading and movement on site by fork lift struck. The principle is to provide the unit to the booster set manufacturer where the booster and associated electrical equipment can be fitted. The completed unit can then be delivered to site where once positioned it requires the simple connection of the mains pipework, outlet pipework to the services, and electrical supply, making it a "plug and play' unit requiring minimal onsite installation.

    All units are fitted with the following:
    1 No 50mm screened lid vent
    1 No single 1600 x 1600mm door to the end face of the pump compartment
    1 No lockable access manway fitted to the roof of the wet compartment.
    1 No EPDM mat to the floor of the pump compartment
    A fully encapsulated ply base.
    Units do not include electrical components, wiring, pump sets, control equipment, connections of any kind or internal pipework.
    Units not fitted with a galvanised steel skid are suitable for positioning onto a structural pad only which should be flat, level and continuous and be +/- 2mm over the surface area.
    Units not fitted with a galvanised steel skid have an external height 200mm less than stated in the overall dimensions column of this document

    Availability 5-6 weeks

    **Cat 5 (AB and AG) supplied loose

    AG Airgap
    IP22-AG-SL
    42mm screened lid vent
    22mm equilibrium float valve
    35mm screened overflow
    22mm screened warning pipe

    IP28-AG-SL
    42mm screened lid vent
    28mm equilibrium float valve
    42mm screened overflow
    22mm screened warning pipe

    IP35-AG-SL
    42mm screened lid vent
    35mm equilibrium float valve
    50mm screened overflow
    22mm screened warning pipe

    IP42-AG-SL
    42mm screened lid vent
    42mm equilibrium float valve
    67mm screened overflow
    22mm screened warning pipe

    IP50-AG-SL
    50mm screened lid vent
    50mm equilibrium float valve
    80mm screened overflow
    22mm screened warning pipe

    AB Airgap
    IP22-AB-SL
    22mm screened lid vent
    22mm equilibrium float valve c/w drop arm and float
    35mm screened overflow
    22mm screened warning pipe

    IP28-AB-SL
    22mm screened lid vent
    28mm equilibrium float valve c/w drop arm and float
    42mm screened overflow
    22mm screened warning pipe

    IP35-AB-SL
    22mm screened lid vent
    35mm equilibrium float valve c/w drop arm and float
    50mm screened overflow
    22mm screened warning pipe

    IP42-AB-SL
    22mm screened lid vent
    42mm equilibrium float valve c/w drop arm and float
    67mm screened overflow
    22mm screened warning pipe

    IP50-AB-SL
    22mm screened lid vent
    50mm equilibrium float valve c/w drop arm and float
    80mm screened overflow
    22mm screened warning pipe

    CU3.4000AB Data
    Nominal Capacity 5500 Litres
    Actual Capacity Approx. 4000 Litres
    Overall Dimensions 3600 x 2000 x 2250mm high
    Wet Compartment 1700 x 1800 x 1800mm
    Pump Compartment 1700 x 1800 x 1800mm

     

    Product Details

    • Product Code: PW
    • Customer Offloading: Customer Offloading
    • Material: GRP
    • Potable: Potable
    • Stock tank: Made to Order, Non Returnable Product
    • WRAS: Yes
    • WRAS Approved: Yes

    Delivery

    Our shipping costs cover most of the UK - however, parts of England, Scottish Highlands and Islands including areas north of the Glasgow / Edinburgh border, Isle of Wight, Channel Islands, Isle of Man, Anglesey, Western Isles, Shetland Islands, Orkney Islands, Isles of Scilly, Northern Ireland and the Republic of Ireland may cost more.

    Please call before ordering if the delivery postcode is listed below. There may be additional shipping costs. AB, BT, CA, CT, DD, DG, EH, FK, G, GY, IM, IV, JE, KA, KW, KY, LD, LL, ML, PA, PH, PO 30-41 (Isle of Wight), SA, SY, TD, TN, TR, ZE Southern Ireland

    Our lead times should only be used as a guide and are subject to change.

    Offloading

    Unless a hi-ab delivery has been booked at additional cost, it is the customer's responsibility to offload with suitable equipment on the day of delivery and a failed delivery may result in additional charges.

    We recommend installers and/or plant hire & materials to install such as excavators, aggregates etc are not booked until you are in receipt of the goods. Tanks Direct cannot be held responsible for costs incurred due to unforeseen delays, please see our terms for more details.

    HIAB

    HIAB delivery will be required if you need the tank offloaded from the delivery vehicle. The driver will unload the tank from the vehicle to ground level, however this service is not to place the tank in situ, this will need to be arranged separately.

    If you have any questions regarding your delivery, please contact the Sales Team on 01643 703358.

    Returns Information

    Please note - Certain items may not be returnable, for example those made to order or for sanitary reasons. Please check the product page for more information.

    Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

    All Items must be returned unused, refunds cannot be issued for used or previously installed items.

    Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

    If you wish to return goods, please complete the form on this page to provide further information.

    Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

    Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

    Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

    View Tanks Direct's return policy now.

    People who bought this also bought...