{"title":"Two Piece Insulated GRP Break Tank","description":"","products":[{"product_id":"1000-litre-grp-water-tank-two-piece-insulated","title":"1000 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e1000 Litre 2 Piece GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note the 1000 Litre stock tank is available as the 25mm insulation Only. Please see the following link for the stocked tank \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/1000-litre-grp-water-tank-two-piece-with-insulation.html\" target=\"_blank\"\u003ePW1000-2.\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e50mm insulation, support stand and baseboards.\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gelcoat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gelcoat layer. This ensures that the tanks are suitable for all locations and weather conditions and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections which are then assembled once the restriction has passed. In a nutshell a one piece tank in two or more bolt together sections. All of the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tanks construction and overall strength of the base. This will benefit the tank if its on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\n\n\t\u003ch3 style=\"text-align:left\"\u003ePW1000 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 1000 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 1180 x 1093 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703795986757,"sku":"PW1000-2-50mm.INS","price":1573.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926538400069,"sku":"PW1000-2","price":1368.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/circle-item-c1437-3-41962b97.jpg?v=1768235508"},{"product_id":"1050-litre-grp-water-tank-two-piece-insulated","title":"1050 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e1000 Litre 2 Piece GRP Water Tank - Insulated (25mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note the 1000 Litre stock tank is available as the 25mm insulation Only. Please see the following link for the stocked tank \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/1000-litre-grp-water-tank-two-piece-with-insulation.html\" target=\"_blank\"\u003ePW1000-2.\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gelcoat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gelcoat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned to raise supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW1050-1 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W X H)\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 500 x 1400 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1655 x 665 x 1453 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes my water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703796379973,"sku":"PW1050-2.50mm.INS","price":2158.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926541480261,"sku":"PW1050-2","price":1877.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4252_26031.jpg?v=1767800405"},{"product_id":"1050-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"1050 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e1050 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These break tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1050-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1500 x 500 x 1400 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1665 x 665 x 1780 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703796478277,"sku":"PW1050-2-AB.50mm.INS","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926542528837,"sku":"PW1050-2-AB","price":2064.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4253_25792.jpg?v=1767875694"},{"product_id":"1135-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"1135 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e1135 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003eAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1624 x 1015 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1135-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1524 x 915 x 812 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1680 x 1080 x 1192 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703796904261,"sku":"PW1135-2-AB.50mm.INS","price":1931.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926546592069,"sku":"PW1135-2-AB","price":1679.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4267_6610.jpg?v=1767800419"},{"product_id":"1220-litre-grp-water-tank-two-piece-insulated","title":"1220 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e1220 Litre GRP Water Tank - Insulated (25mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gelcoat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gelcoat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned to raise supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW1220 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1220 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1180 x 1180 x 1312 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703797461317,"sku":"PW1220-2.50mm.INS","price":1837.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926547476805,"sku":"PW1220-2","price":1597.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4282_26034.jpg?v=1767800435"},{"product_id":"1220-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"1220 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e1220 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003eAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1220-2-AB Data Sheet\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 1000 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 1180 x 1600 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703797494085,"sku":"PW1220-2-AB.50mm.INS","price":2072.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926548885829,"sku":"PW1220-2-AB","price":1802.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4283_6684.jpg?v=1767800433"},{"product_id":"125-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"125 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e125 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003c\/p\u003e\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. (Made to order, non-returnable)\u003c\/p\u003e\n\u003cp\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align: left;\"\u003ePW125-1-AB Specifications\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 500 x 500 x 500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 690 x 690 x 889 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703797690693,"sku":"PW125-2-AB.50mm.INS","price":819.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926549475653,"sku":"PW125-2-AB","price":799.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4290_6717.jpg?v=1767800442"},{"product_id":"1364-litre-grp-water-tank-two-piece-insulated","title":"1364 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e1364 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gelcoat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gelcoat layer. This ensures that the tanks are suitable for all locations and weather conditions and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections which are then assembled once the restriction has passed. In a nutshell a one piece tank in two or more bolt together sections.\u003cbr\u003eAll of the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tanks construction and overall strength of the base. This will benefit the tank if its on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1470 x 1192 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1364 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1370 x 1092 x 915 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1570 x 1290 x 1008 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703798051141,"sku":"PW1364-2.50mm.INS","price":1802.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926553047365,"sku":"PW1364-2","price":1567.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4299_26035.jpg?v=1767800455"},{"product_id":"1364-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"1364 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e1364 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003eAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1364-2-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1370 x 1092 x 915 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1570 x 1290 x 1295 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703798214981,"sku":"PW1364-2-AB.50mm.INS","price":2035.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926553801029,"sku":"PW1364-2-AB","price":1767.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4300_6765.jpg?v=1767800450"},{"product_id":"1590-litre-grp-water-tank-two-piece-insulated","title":"1590 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e1590 Litre GRP Water Tanks - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1624 x 1243 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1590 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1524 x 1143 x 915 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1700 x 1310 x 1008 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703798640965,"sku":"PW1590-2","price":1703.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4333_26038.jpg?v=1767800478"},{"product_id":"1590-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"1590 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e1590 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe Tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1624 x 1243 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1590-2-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1524 x 1143 x 915 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1700 x 1310 x 1295 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703798706501,"sku":"PW1590-2-AB.50mm.INS","price":2198.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926560387397,"sku":"PW1590-2-AB","price":1912.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4334_6924.jpg?v=1767800477"},{"product_id":"160-litre-grp-water-tank-two-piece-insulated","title":"160 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e\n\u003c!--StartFragment--\u003eTwo piece 160 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003eAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e860 x 560 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW160-2 Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 760 x 460 x 460 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 950 x 655 x 499 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your GRP tank need a Clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703798870341,"sku":"PW160-250mmINS","price":736.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926560584005,"sku":"PW160-2","price":640.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4342_26011.jpg?v=1767800487"},{"product_id":"1818-litre-grp-water-tank-two-piece-insulated","title":"1818 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e1818 Litre Two Piece GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank.\u003cbr\u003eThe assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1320 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW1818 Specifications\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1220 x 1220 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1390 x 1390 x 1308 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703799165253,"sku":"PW1818-2.50mm.INS","price":2097.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926563270981,"sku":"PW1818-2","price":1823.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4354_26039.jpg?v=1767800497"},{"product_id":"1818-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"1818 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e1818 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank.\u003cbr\u003eThe assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1320 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePW1818-2-AB Dimensions\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1220 x 1220 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1390 x 1390 x 1600 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e\n\u003cul\u003e\n\t\u003cli\u003es\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703799198021,"sku":"PW1818-2-AB.50mm.INS","price":2295.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926563533125,"sku":"PW1818-2-AB","price":1995.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4355_7015.jpg?v=1767800493"},{"product_id":"2000-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"2000 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e2000 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank.\u003cbr\u003eThe assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2000 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 1000 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2202 x 1202 x 1380 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703799591237,"sku":"PW2000-2-AB.50mm.INS","price":2610.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926615929157,"sku":"PW2000-2-AB","price":2270.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4374_7092.jpg?v=1767800510"},{"product_id":"2001-litre-grp-water-tank-two-piece-insulated","title":"2001 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e2000 Litre GRP Water Tanks - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost) Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1015 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003cp style=\"text-align:left\"\u003ePW2001 Specifications\u003c\/p\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 2000 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1180 x 1180 x 2093 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703799722309,"sku":"PW2001-2.50mm.INS","price":2859.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926616486213,"sku":"PW2001-2","price":2486.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/44096_26041.jpg?v=1767800517"},{"product_id":"2250-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"2250 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e2250 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions.\u003cbr\u003eThe whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1600 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2250 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1500 x 1000 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1702 x 1202 x 1880 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003e\nWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703800017221,"sku":"PW2250-2-AB.50mm.INS","price":2566.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926620320069,"sku":"PW2250-2-AB","price":2231.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4391_7165.jpg?v=1767800532"},{"product_id":"225-litre-grp-water-tank-two-piece-insulated","title":"225 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e225 Litre GRP Water Tanks - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e710 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW225-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 610 x 610 x 610 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 805 x 805 x 649 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your GRP tank need a Clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56703800181061,"sku":"PW225-2","price":675.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926619369797,"sku":"PW225-2.50mm.INS","price":776.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4381_26013.jpg?v=1767800525"},{"product_id":"225-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"225 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"Apple-style-span\" style=\"white-space: pre-wrap;\"\u003e225 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5\u003c\/span\u003e \u003cspan style=\"line-height: 19px;\"\u003eFull WRAS approval\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong style=\"line-height: 19px;\"\u003eProduct Image is an example only showing a 2 piece tank with AB air gap.\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"line-height: 19px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gelcoat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections which are then assembled once the restriction has passed. In a nutshell and a one piece tank in two or more bolt together sections. All of the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003cbr\u003e\u003c\/strong\u003eNominal capacity = full capacity to top of tank\u003cbr\u003e\n\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eTank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOptional steel water tank support Stand\u003c\/strong\u003e\u003cbr\u003e\n\n- Steel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003cbr\u003e\n\n- Allows maximum use of the available footprint.\u003cbr\u003e\n\n- Increases the static head for applications where pressurised feed to equipment is advantageous.\u003cbr\u003e\n\n- Suitable for One piece tanks.\u003cbr\u003e\n\n- Painted Grey Primer finish.\u003cbr\u003e\n\n- Manufactured in one piece\u003cbr\u003e\n\n- Supplied with ply boarding to provide a flat solid surface for the tank base\u003cbr\u003e\n\n- 710 x 710 x 1050mm (1000mm clearance to underside)\u003cbr\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003cbr\u003e\n\n\u003cstrong\u003eAnnual Disinfection Information and Options\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003e\n\u003cspan style=\"font-size: 13.91px;\"\u003eDesigned for easy installation, saving time and money\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan style=\"font-size: 13.91px;\"\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan style=\"font-size: 13.91px;\"\u003eAll work is carried out by CSCS qualified engineers\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan style=\"font-size: 13.91px;\"\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan style=\"font-size: 13.91px;\"\u003eFull tank replacement works available\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan style=\"font-size: 13.91px;\"\u003eLegionella risk assessments including schematic drawings if required\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan style=\"font-size: 13.91px;\"\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan style=\"font-size: 13.91px;\"\u003eBuilding flush and mains injection\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan style=\"font-size: 13.91px;\"\u003eCommissioning of booster sets\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan style=\"font-size: 13.91px;\"\u003eServicing of water softners and booster sets\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan style=\"font-size: 13.91px;\"\u003eReplacement of hollow roof struts.\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan style=\"font-size: 13.91px;\"\u003eInsulating of existing cold water storage tanks\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703800279365,"sku":"PW225-2-AB.50mmINS","price":1025.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926619664709,"sku":"PW225-2-AB","price":890.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4382_7127.jpg?v=1767800527"},{"product_id":"2272-litre-grp-water-tank-two-piece-insulated","title":"2272 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e2272 Litre Two Piece GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank.\u003cbr\u003e\nThe assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1928 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW2272 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1828 x 1220 x 1016 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2020 x 1410 x 1109 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703800508741,"sku":"PW2272-2.50mm.INS","price":2460.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926620614981,"sku":"PW2272-2","price":2139.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4400_26043.jpg?v=1767800546"},{"product_id":"2272-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"2272 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e2272 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank.\u003cbr\u003eThe assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1928 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2272-2-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1828 x 1220 x 1016 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2020 x 1410 x 1396 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703800574277,"sku":"PW2272-2-AB.50mm.INS","price":2691.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926620877125,"sku":"PW2272-2-AB","price":2340.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4401_7214.jpg?v=1767800542"},{"product_id":"2500-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"2500 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2 style=\"margin: 0px; text-indent: 0px;\"\u003e\n\u003c!--StartFragment--\u003e2500 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5- Full WRAS approval\u003c\/h2\u003e\n\u003cp style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"\u003e\u003cbr\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003c\/p\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions.\u003cbr\u003eThe whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2500 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 1000 x 1250 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2202 x 1202 x 1630 mm \u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703800869189,"sku":"PW2501-2-AB.50mm.INS","price":3078.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926625890629,"sku":"PW2501-2-AB","price":2677.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4424_7331.jpg?v=1767800562"},{"product_id":"251-litre-grp-water-tank-two-piece-insulated","title":"251 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e251 Litre GRP Water Tanks - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW251-2 Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 500 x 500 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 690 x 690 x 1009 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your GRP tank need a Clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703801426245,"sku":"PW251-2.50mm.INS","price":844.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926626742597,"sku":"PW251-2","price":723.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4432_7364.jpg?v=1767800570"},{"product_id":"2726-litre-grp-water-tank-two-piece-insulated","title":"2726 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e\n\u003c!--StartFragment--\u003e2726 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1930 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW2726 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1828 x 1220 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2020 x 1410 x 1313 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703801557317,"sku":"PW2726-2.50mm.INS","price":2730.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926627922245,"sku":"PW2726-2","price":2375.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4440_26045.jpg?v=1767800579"},{"product_id":"2726-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"2726 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2 style=\"margin: 0px; text-indent: 0px;\"\u003e\n\u003c!--StartFragment--\u003e2726 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp style=\" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;\"\u003e\u003cbr\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003c\/p\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1930 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2726-2-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1828 x 1220 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2020 x 1410 x 1600 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703801590085,"sku":"PW2726-2-AB.50mm.INS","price":2876.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926628282693,"sku":"PW2726-2-AB","price":2465.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4441_7401.jpg?v=1767800577"},{"product_id":"305-litre-grp-water-tank-two-piece-insulated","title":"305 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e305 Litre GRP Water Tanks - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for two-piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt-up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with plywood to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW305-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 1220 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 690 x 690 x 1229 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your GRP tank need a Clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed-priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works are available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works are available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments, including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulation of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703802114373,"sku":"PW305-2.50mm.INS","price":1075.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926636278085,"sku":"PW305-2","price":934.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4467_26015.jpg?v=1767800598"},{"product_id":"305-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"305 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e305 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW305-2-AB Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 500 x 500 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 690 x 690 x 1600 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703802147141,"sku":"PW305-2-AB.50mm.INS","price":1258.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926636409157,"sku":"PW305-2-AB","price":1094.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/44231_20239.jpg?v=1767875700"},{"product_id":"3185-litre-grp-water-tank-two-piece-insulated","title":"3185 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e3185 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. \u003cbr\u003e\nThe whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e2540 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW3185 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2440 x 1220 x 1070 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2610 x 1410 x 1163 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703802245445,"sku":"PW3185-2.50mm.INS","price":3280.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926636572997,"sku":"PW3185-2","price":2841.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4473_26048.jpg?v=1767800606"},{"product_id":"340-litre-grp-water-tank-two-piece-insulated","title":"340 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e340 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\n\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\nOptional steel water tank support Stand\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1015 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW340-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 915 x 610 x 610 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1080 x 775 x 650 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your GRP tank need a Clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703803392325,"sku":"PW340-2.50mm.INS","price":937.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926639325509,"sku":"PW340-2","price":813.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4483_26017.jpg?v=1767800618"},{"product_id":"340-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"340 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e340 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003eAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1015 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW340-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 915 x 610 x 610 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1090 x 785 x 990 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003cp\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/p\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703803425093,"sku":"PW340-2-AB.50mm.INS","price":1099.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926639849797,"sku":"PW340-2-AB","price":955.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4484_7611.jpg?v=1767800616"},{"product_id":"3636-litre-grp-water-tank-two-piece-insulated","title":"3636 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e3636 Litre GRP Water Tanks - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003eAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2540 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW3636 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2440 x 1220 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2610 x 1410 x 1313 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703803687237,"sku":"PW3636-2.50mm.INS","price":3415.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926641652037,"sku":"PW3636-2","price":2967.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4494_26049.jpg?v=1767800627"},{"product_id":"3750-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"3750 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e3750 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. (Made to order non-returnable) All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank.\u003cbr\u003eThe assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW3750 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2500 x 1500 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2694 x 1694 x 1380 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e\n\u003cp\u003e\n\nWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003cbr\u003e\u003cstrong\u003eAnnual Disinfection Information and Options\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56703804473669,"sku":"PW3750-2-AB","price":3430.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926643880261,"sku":"PW3750-2-AB.50mm.INS","price":3945.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4507_7718.jpg?v=1767800633"},{"product_id":"4001-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"4001 Litre Type AB Air Gap GRP Water Tank, Two piece, Insulated, CAT 5","description":"\u003ch2\u003e4001 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW4001 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 1000 x 2000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2202 x 1202 x 2475 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703804735813,"sku":"PW4001-2-AB.50mm.INS","price":4490.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926647517509,"sku":"PW4001-2-AB","price":3903.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/44427_20261.jpg?v=1767875702"},{"product_id":"4500-litre-grp-water-tank-two-piece-insulated","title":"4500 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e4500 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW4500 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2500 x 1500 x 1200 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2694 x 1694 x 1293 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703804899653,"sku":"PW4500-2.50mm.INS","price":4015.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926649549125,"sku":"PW4500-2","price":3491.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4526_26053.jpg?v=1767800660"},{"product_id":"4500-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"4500 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e4500 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/h3\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW4500 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2500 x 1500 x 1200 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2694 x 1694 x 1580 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703804932421,"sku":"PW4500-2-AB","price":3662.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4527_7812.jpg?v=1767800657"},{"product_id":"454-litre-grp-water-tank-two-piece-insulated","title":"454 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e454 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used, along with highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer, which provides a clinically smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in the prevention of osmotic blistering. Further reinforcement is provided by square-section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC-free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions.\u003cbr\u003e\nWhere access is a limiting factor and our one-piece GRP tanks are unsuitable, a two-piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one-piece tank in two or more bolt-together sections. All the components, including sealant and fixings for the joint flange, are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to the top of the tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low-level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for one-piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1167 x 710 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW454-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimension (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1067 x 610 x 710 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1245 x 795 x 727 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer acquiring the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or a HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly. With this in mind, we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed-priced packages ranging from 1 to 3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS-qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works are available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works are available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments, including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS-approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulation of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703805030725,"sku":"PW454-2.50mm.INS","price":1024.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926649811269,"sku":"PW454-2","price":890.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4544_26019.jpg?v=1767800668"},{"product_id":"454-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"454 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e454 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW454-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1067 x 610 x 710 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1255 x 805 x 1090 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003e\n\nWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003cbr\u003e\u003cstrong\u003eAnnual Disinfection Information and Options\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703805063493,"sku":"PW454-2-Ab50mmINS","price":1290.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926650204485,"sku":"PW454-2-AB","price":1118.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4545_7855.jpg?v=1767800667"},{"product_id":"500-litre-grp-water-tank-two-piece-insulated","title":"500 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e500 Litre 2 Piece GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only the highest-quality materials are used, along with highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer, which provides a clinically smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in the prevention of osmotic blistering. Further reinforcement is provided by square-section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration typically encountered with timber supports are avoided, thereby providing full structural reinforcement for the tank's entire lifespan. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to the top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low-level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for two-piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt-up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\t\u003cli\u003eSee 'more images' tab for an example image (actual may vary)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW500-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 500 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1180 x 1180 x 536 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003cp\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/p\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly. With this in mind, we can offer the following service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed-priced packages ranging from 1–3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS-qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works are available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works are available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments, including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS-approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulation of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56703805423941,"sku":"PW501-2","price":1015.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926652891461,"sku":"PW501-2.50mm.INS","price":1170.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4555_26020.jpg?v=1769007552"},{"product_id":"500-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"500 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e500 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\t\u003cli\u003eSee 'more images' tab for an example image (actual may vary)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW500-1-AB Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 1000 x 500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 1180 x 880 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003e\n\nWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703805456709,"sku":"PW500-2-AB.50mm.INS","price":1390.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926656790853,"sku":"PW500-2-AB","price":1207.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4556_7913.jpg?v=1767800678"},{"product_id":"5625-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"5625 Litre Type AB Air Gap GRP Water Tank, Insulated, CAT 5","description":"\u003ch2\u003e5625 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval.\u003c\/h2\u003e\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003c\/p\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank, if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW5625 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2500 x 1500 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2694 x 1694 x 1880 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703805849925,"sku":"PW5625-2-AB.50mm.INS","price":4757.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926661935429,"sku":"PW5625-2-AB","price":4135.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/44426_20256.jpg?v=1767875703"},{"product_id":"5625-litre-grp-water-tank-two-piece-insulated","title":"5625 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e5625 Litre GRP Water Tanks - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost) Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePW5625 Specifications\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2500 x 1500 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2694 x 1694 x 1593 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703805882693,"sku":"PW5625-2.50mm.INS","price":4557.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926661738821,"sku":"PW5625-2","price":3962.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4588_26055.jpg?v=1767800697"},{"product_id":"570-litres-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"570 Litres Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e570 Litres Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. (Made to order, non-returnable). Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These break tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ccaption\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3\u003ePW570-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 990 x 760 x 760 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1150 x 925 x 1140 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/caption\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56703806538053,"sku":"PW570-2-AB","price":1170.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926662590789,"sku":"PW570-2-AB.50mm.INS","price":1347.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4594_8054.jpg?v=1767800708"},{"product_id":"6000-litre-grp-water-tank-two-piece-insulated","title":"6000 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e6000 Litre 2 Piece GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\u003cp\u003e\n\nFull WRAS approval. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003eAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e3100 x 2100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW6000 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 3000 x 2000 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 3192 x 2192 x 1093 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703806734661,"sku":"PW6000-250mmINS","price":5150.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926666752325,"sku":"PW6000-2","price":4477.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4605_26056.jpg?v=1767800718"},{"product_id":"6001-litre-grp-water-tank-two-piece-insulated","title":"6001 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e6001 Litre GRP Water Tanks - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW6001 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 2000 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2192 x 2192 x 1593 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703806865733,"sku":"PW6001-2.50mm.INS","price":5245.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926667309381,"sku":"PW6001-2","price":4560.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4614_26057.jpg?v=1767800726"},{"product_id":"6001-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"6001 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e6001 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. (Made to order, non-returnable)\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW6001 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 2000 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2192 x 2192 x 1880 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703807095109,"sku":"PW6001-2-AB.50mm.INS","price":5345.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926667538757,"sku":"PW6001-2-AB","price":4644.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4615_8146.jpg?v=1767800725"},{"product_id":"600-litre-grp-water-tank-two-piece-insulated","title":"600 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e600 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gelcoat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gelcoat layer. This ensures that the tanks are suitable for all locations and weather conditions and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections which are then assembled once the restriction has passed. In a nutshell a one piece tank in two or more bolt together sections.\u003cbr\u003eAll of the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW601-2 Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 500 x 1200 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 680 x 1236 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1015 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703807226181,"sku":"PW601-2.50mm.INS","price":1340.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926665867589,"sku":"PW601-2","price":1164.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4622_26023.jpg?v=1767800734"},{"product_id":"600-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"600 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e600 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003eAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW601-2-AB Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 500 x 1200 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 680 x 1580 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1015 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703807258949,"sku":"PW601-2-AB.50mm.INS","price":1595.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926666588485,"sku":"PW601-2-AB","price":1385.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4623_8181.jpg?v=1767800733"},{"product_id":"650-litre-grp-water-tank-two-piece-insulated","title":"650 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e650 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and\u003c\/p\u003e\n\n\u003cp\u003eweather conditions and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank.\u003cbr\u003e\nThe assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned to raise supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1167 x 710 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW650-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1067 x 610 x 1000 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1245 x 795 x 1017 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1 to 3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703807455557,"sku":"PW650-2.50mm.INS","price":1367.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926670586181,"sku":"PW650-2","price":1189.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4628_26024.jpg?v=1767800746"},{"product_id":"650-litre-type-ab-air-gap-grp-water-tank-two-piece-insulated-cat-5","title":"650 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e650 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\n\u003cem\u003eProduct Image is an example only showing a 2 piece tank with AB air gap\u003c\/em\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These break tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003eAll the components including sealant and fixings for the joint flange are supplied with the tank.\u003cbr\u003eThe assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1320 x 1015 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW650-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1067 x 610 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1255 x 805 x 1380 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703807488325,"sku":"PW650-2-AB.50mm.INS","price":1599.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926670913861,"sku":"PW650-2-AB","price":1390.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4629_8217.jpg?v=1767800745"},{"product_id":"680-litre-grp-water-tank-two-piece-insulated","title":"680 Litre GRP Water Tank - Two Piece Insulated","description":"\u003ch2\u003e680 Litre GRP Water Tank - Insulated (25mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank.\u003cbr\u003e\nThe assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned to raise supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1320 x 1015 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW680-2 Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1220 x 915 x 610 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1395 x 1087 x 649 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1 to 3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703807717701,"sku":"PW680-2.50mm.INS","price":1226.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926671307077,"sku":"PW680-2","price":1065.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4636_26025.jpg?v=1767800756"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/collections\/circle-item-c1437-41962b97.jpg?v=1783591212","url":"https:\/\/tanks-direct.co.uk\/collections\/two-piece-insulated-grp-break-tank.oembed?page=7","provider":"Tanks Direct","version":"1.0","type":"link"}