{"title":"One Piece Insulated GRP Break Tanks","description":"","products":[{"product_id":"1000-litre-type-ab-air-gap-grp-break-tank-insulated-cat-5","title":"1000 Litre Type AB Air Gap GRP Break Tank, Insulated, Cat 5","description":"\u003ch2\u003e1000 Litre Type AB Air Gap GRP Break Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval.\u003c\/h2\u003e\n\u003cp\u003e\n\nPlease note, this tank is a stocked item. If you require an encapsulated baseboard or Drip tray with the tank, please click on the following link to \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/1000-litre-type-ab-air-gap-grp-water-tank-insulated-25mm-cat-5.html\" target=\"_blank\"\u003ePW1000-1-AB\u003c\/a\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1000-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 1000 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 1180 x 1IXO-473 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703795953989,"sku":"PW1000-1-AB.ST","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/circle-item-c928-2-b8c5b9a4.jpg?v=1768235794"},{"product_id":"1125-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1125 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1125 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. \u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1624 x 1015 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1125-1 Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1500 x 500 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n \u003cp\u003e External Dimensions (L x W x H)\u003c\/p\u003e\n \u003c\/td\u003e\n \u003ctd\u003e 1665 x 665 x 1933 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703796674885,"sku":"PW1125-1-AB.50mm.INS","price":1920.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926545215813,"sku":"PW1125-1-AB","price":1677.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4259_20076.jpg?v=1767875694"},{"product_id":"1135-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1135 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1135 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. \u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/p\u003e\n\u003cp\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/p\u003e\n\u003cp\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1624 x 1015 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1135-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1524 x 915 x 812 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1680 x 1080 x 1285 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703796838725,"sku":"PW1135-1-AB.50mm.INS","price":1340.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926546624837,"sku":"PW1135-1-AB","price":1166.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4264_6594.jpg?v=1767800416"},{"product_id":"12000-litre-grp-water-tank-insulated","title":"12000 Litre GRP Water Tank, Insulated","description":"\u003ch2\u003e12000 Ltr GRP Water Tank - Insulated (25 mm) - Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost) Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eNominal capacity shown\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank, if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW12000 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 3000 x 2000 x 2000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 3192 x 2192 x 2093 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703797035333,"sku":"PW12000-1.50mm.INS","price":7650.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926547411269,"sku":"PW12000-1","price":6654.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4273_26008.jpg?v=1767800425"},{"product_id":"12000-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"12000 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e12000 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 - Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e3000 x 2000 x 2000 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1200 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 3000 x 2000 x 2000 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 3192 x 2192 x 2433 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703797133637,"sku":"PW12000-1-AB.50mm.INS","price":8050.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926547444037,"sku":"PW12000-1-AB","price":6998.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47537_24997.jpg?v=1767875695"},{"product_id":"1220-litre-grp-water-tank-insulated","title":"1220 Litre GRP Water Tank, Insulated","description":"\u003ch2\u003e1220 Ltr GRP Water Tank - Insulated (25 mm) Full WRAS approval.\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank, if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1220 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 1000 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 1180 x 1312 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703797297477,"sku":"PW1220-1-50mm.INS","price":1268.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926547935557,"sku":"PW1220-1","price":1103.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4279_25987.jpg?v=1767800431"},{"product_id":"1220-litre-grp-water-tank-insulated-stock-tank","title":"1220 Litre GRP Water Tank, Insulated, Stock tank","description":"\u003ch2\u003e1220 Ltr GRP Water Tank - Insulated (25mm) Full WRAS approval.\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003ePlease note this tank is supplied with the following - \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e- 25mm Insulation\u003cbr\u003e- Standard position pads\u003c\/p\u003e\n\u003cp\u003eIf a baseboard, drip tray, or support stand is required, please use the following code - \u003cstrong\u003e\u003ca href=\"https:\/\/www.tanks-direct.co.uk\/1220-litre-grp-water-tank-insulated\/p4279\"\u003ePW1220-1\u003c\/a\u003e. \u003c\/strong\u003eThe linked tank is a bespoke tank so will be made to order.\u003c\/p\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing process. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gelcoat layer which provides a clinically smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in the prevention of osmotic blistering. After the CFC-free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003eWhere access is a limiting factor and our one-piece GRP tanks are unsuitable a two-piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections which are then assembled once the restriction has passed. In a nutshell and a one-piece tank in two or more bolt-together sections. All of the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of the tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned raise supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low-level connection pads, on the opposite end of the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW1220 Specifications\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 1000 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 1180 x 1315 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer acquiring the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed-priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS-qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works are available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS-approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703797395781,"sku":"PW1220-1-ST","price":1103.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/28086_18364.jpg?v=1767800428"},{"product_id":"125-litre-type-ab-air-gap-grp-water-tank-insulated","title":"125 Litre Type AB Air Gap GRP Water Tank, Insulated","description":"\u003ch2\u003e125 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval.\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003e\nOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003e\nAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\n\u003cp\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. View more information on our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/water-tanks\/grp-tanks\/two-piece-insulated-grp-break-tank\/c927\"\u003etwo piece GRP tank range\u003c\/a\u003e here.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003cp style=\"text-align:left\"\u003ePW125-1-AB Specifications\u003c\/p\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 500 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e 690 x 690 x 889 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, please click \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703797723461,"sku":"PW125-1-AB.50mm.INS","price":512.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926549508421,"sku":"PW125-1-AB","price":445.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43471_20003.jpg?v=1767875696"},{"product_id":"1364-litres-grp-water-tank-insulated","title":"1364 Litres GRP Water Tank, Insulated","description":"\u003ch2\u003e1364 Litres GRP Water Tank - Insulated (25 mm) Full WRAS approval.\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1470 x 1192 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1364 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1370 x 1092 x 915 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1570 x 1290 x 1008 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703797920069,"sku":"PW1364-1-50mm.INS","price":1265.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926553866565,"sku":"PW1364-1","price":1101.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4296_25988.jpg?v=1767800448"},{"product_id":"1364-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1364 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1364 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1470 x 1192 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1364-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1370 x 1092 x 915 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1570 x 1290 x 1388 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703797952837,"sku":"PW1364-1-AB.50mm.INS","price":1420.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926553833797,"sku":"PW1364-1-AB","price":1234.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4297_6741.jpg?v=1767800449"},{"product_id":"1501-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1501 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1501 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm.\u003c\/p\u003e\n\u003cp\u003eA float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra\u003c\/p\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1501 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 1000 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 1180 x 1973 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703798411589,"sku":"PW1501-1-AB.50mm.INS","price":1845.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926560092485,"sku":"PW1501-1-AB","price":1605.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4320_6860.jpg?v=1767800465"},{"product_id":"1818-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1818 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1818 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. \u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1320 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePW1818-1-AB Dimensions\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1220 x 1220 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1390 x 1390 x 1688 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703799099717,"sku":"PW1818-1-AB.50mm.INS","price":1728.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926563565893,"sku":"PW1818-1-AB","price":1503.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4352_6998.jpg?v=1767800492"},{"product_id":"187-litre-grp-water-tank-insulated","title":"187 Litre GRP Water Tank, Insulated","description":"\u003ch2\u003e187 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval.\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP\u003c\/strong\u003e\u003cem\u003elease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW187 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 500 x 500 x 750 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 690 x 690 x 759 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes my water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703799263557,"sku":"PW187-1-50mm.INS","price":415.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926564221253,"sku":"PW187-1","price":360.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4364_25928.jpg?v=1767800503"},{"product_id":"187-litre-type-ab-air-gap-grp-water-tank-insulated","title":"187 Litre Type AB Air Gap GRP Water Tank, Insulated","description":"\u003ch2\u003e187 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval.\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP\u003c\/strong\u003e\u003cem\u003elease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW187-1-AB Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 500 x 500 x 750 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 690 x 690 x 1139 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes my water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703799329093,"sku":"PW187-1-AB.50mm.INS","price":573.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926564450629,"sku":"PW187-1-AB","price":498.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43472_20007.jpg?v=1767875698"},{"product_id":"225-litre-type-ab-air-gap-grp-water-tank-one-piece-insulated-cat-5","title":"225 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5","description":"\u003ch2\u003e225 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e710 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW225-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Model\u003c\/td\u003e\n \u003ctd\u003e PW225-1-AB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n \u003ctd\u003e 610 x 610 x 610 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd\u003e 805 x 805 x 1029 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703800049989,"sku":"PW225-1-AB.50mm.INS","price":599.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926619631941,"sku":"PW225-1-AB","price":523.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/42058_19925.jpg?v=1767875699"},{"product_id":"2272-litre-grp-water-tank-insulated","title":"2272 Litre GRP Water Tank, Insulated","description":"\u003ch2\u003e2272 Litre GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW2272 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1828 x 1220 x 1016 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2020 x 1410 x 1109 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1928 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703800377669,"sku":"PW2272-1-50mm.INS","price":1799.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926620680517,"sku":"PW2272-1","price":1566.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4397_25993.jpg?v=1767800540"},{"product_id":"2272-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"2272 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e2272 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1928 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW2272-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1828 x 1220 x 1016 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2020 x 1410 x 1489 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703800541509,"sku":"PW2272-1-AB.50mm.INS","price":1995.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926620909893,"sku":"PW2272-1-AB","price":1734.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4398_7194.jpg?v=1767800540"},{"product_id":"2500-litres-grp-water-tank-insulated","title":"2500 Litres GRP Water Tank, Insulated","description":"\u003ch2\u003e2500 Litres GRP Water Tank - Insulated (25 mm) Full WRAS approval.\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank, if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW2500 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 1000 x 1250 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2202 x 1202 x 1343 mm \u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703800738117,"sku":"PW2501-1-50mm.INS","price":2248.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926625923397,"sku":"PW2501-1","price":1955.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4420_25967.jpg?v=1767800556"},{"product_id":"2500-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"2500 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e2500 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2500 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 1000 x 1250 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2202 x 1202 x 1723 mm \u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703800836421,"sku":"PW2501-1-AB.50mm.INS","price":2417.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926625857861,"sku":"PW2501-1-AB","price":2102.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4421_7310.jpg?v=1767800558"},{"product_id":"251-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"251 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e251 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval, Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW251 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Specifications (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 500 x 500 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Specifications (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 690 x 690 x 1389 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703801393477,"sku":"PW251-1-AB.50mm.INS","price":755.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926627004741,"sku":"PW251-1-AB","price":657.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43473_20010.jpg?v=1767875700"},{"product_id":"305-litre-type-ab-air-gap-grp-water-tank-one-piece-insulated-cat-5","title":"305 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5","description":"\u003ch2\u003e305 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW305-1-AB Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 500 x 500 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 690 x 690 x 1609 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703802048837,"sku":"PW305-1-AB.50mm.INS","price":945.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926636376389,"sku":"PW305-1-AB","price":822.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43475_20013.jpg?v=1767875700"},{"product_id":"3185-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"3185 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e3185 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. \u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2540 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW3185-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2440 x 1220 x 1070 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2610 x 1410 x 1543 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703802212677,"sku":"PW3185-1-AB50mmINS","price":2760.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926637130053,"sku":"PW3185-1-AB","price":2401.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4471_7543.jpg?v=1767800600"},{"product_id":"338-litre-grp-water-tank-insulated","title":"338 Litre GRP Water Tank, Insulated","description":"\u003ch2\u003e338 Litre GRP Water Tanks - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raise supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW338 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e 610 x 610 x 910 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e 805 x 805 x 935 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for one-piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e710 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703802409285,"sku":"PW338-1.50mm.INS","price":635.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926638899525,"sku":"PW338-1","price":540.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/42128_25975.jpg?v=1767800607"},{"product_id":"338-litre-type-ab-air-gap-grp-water-tank-one-piece-insulated-cat-5","title":"338 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5","description":"\u003ch2\u003e338 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e710 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW338-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Model\u003c\/td\u003e\n \u003ctd\u003e PW338-1-AB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n \u003ctd\u003e 610 x 610 x 910 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd\u003e 805 x 805 x 1315 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703802474821,"sku":"PW338-1-AB.50mm.INS","price":867.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926639096133,"sku":"PW338-1-AB","price":754.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/42131_19926.jpg?v=1767875701"},{"product_id":"3636-litre-grp-water-tank-insulated","title":"3636 Litre GRP Water Tank, Insulated","description":"\u003ch2\u003e3636 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval.\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW3636 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2440 x 1220 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2610 x 1410 x 1313 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2540 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703803588933,"sku":"PW3636-1-50mm.INS","price":2605.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926641750341,"sku":"PW3636-1","price":2263.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4491_25997.jpg?v=1767800624"},{"product_id":"3750-litre-grp-water-tank-insulated","title":"3750 Litre GRP Water Tank, Insulated","description":"\u003ch2\u003e3750 Litre GRP Water Tanks - Insulated (25 mm) Full WRAS approval.\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All of the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank, if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW3750 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2500 x 1500 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2694 x 1694 x 1093 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703804408133,"sku":"PW3750-1.50mm.INS","price":2895.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926643781957,"sku":"PW3750-1","price":2517.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4503_25998.jpg?v=1767800633"},{"product_id":"375-litre-type-ab-air-gap-grp-water-tank-one-piece-insulated-cat-5","title":"375 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5","description":"\u003ch2\u003e375 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\t\u003cli\u003eNominal capacity = full capacity to top of tank\u003c\/li\u003e\n\t\u003cli\u003eActual capacity = float level\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW375-1-AB Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 500 x 500 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 690 x 690 x 1889 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003cp\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/p\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703804506437,"sku":"PW375-1-AB.50mm.INS","price":928.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926643421509,"sku":"PW375-1-AB","price":805.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43476_20016.jpg?v=1767875702"},{"product_id":"4001-litre-grp-water-tank-insulated","title":"4001 Litre GRP Water Tank, Insulated","description":"\u003ch2\u003e4001 Litre GRP Water Tank\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW4001 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 1000 x 2000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2202 x 1202 x 2095 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703804670277,"sku":"PW4001-1.50mm.INS","price":3598.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926647255365,"sku":"PW4001-1","price":3125.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/42971_26000.jpg?v=1767800647"},{"product_id":"4500-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"4500 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e4500 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW4500 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2500 x 1500 x 1200 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2694 x 1694 x 1673mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703804768581,"sku":"PW4500-1-AB50mmINS","price":3296.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926649712965,"sku":"PW4500-1-AB","price":2866.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4524_7795.jpg?v=1767800654"},{"product_id":"5000-litre-grp-water-tank-insulated","title":"5000 Litre GRP Water Tank, Insulated","description":"\u003ch2\u003e5000 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval.\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW5000 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions ( L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2500 x 2000 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2692 x 2192 x 1093 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703805227333,"sku":"PW5000-1.50mmI.NS","price":3382.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926657839429,"sku":"PW5000-1","price":2939.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4562_26002.jpg?v=1767800684"},{"product_id":"5625-litre-type-ab-air-gap-grp-water-tank-insulated","title":"5625 Litre Type AB Air Gap GRP Water Tank, Insulated","description":"\u003ch2\u003e5625 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval.\u003c\/h2\u003e\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003c\/p\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank, if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW5625 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2500 x 1500 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2694 x 1694 x 1973 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703805817157,"sku":"PW5625-1-AB.50mm.INS","price":3865.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926661968197,"sku":"PW5625-1-AB","price":3356.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43682_20103.jpg?v=1767875704"},{"product_id":"570-litre-grp-water-tank-insulated","title":"570 Litre GRP Water Tank, Insulated","description":"\u003ch2\u003e570 Litre GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW570 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 990 x 760 x 760 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1150 x 925 x 799 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703806144837,"sku":"PW570-1-50mm.INS","price":659.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926662197573,"sku":"PW570-1.","price":573.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4591_25977.jpg?v=1767800704"},{"product_id":"6001-litre-grp-water-tank-insulated","title":"6001 Litre GRP Water Tank, Insulated","description":"\u003ch2\u003e6001 Litre GRP Water Tanks - Insulated (25 mm) - Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank, if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Sta\u003cstrong\u003end\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW6001 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 2000 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2192 x 2192 x 1593 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703806800197,"sku":"PW6001-1.50mm.INS","price":4257.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926667342149,"sku":"PW6001-1","price":3700.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4611_26005.jpg?v=1767800724"},{"product_id":"6001-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"6001 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e6001 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 - Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Float Valve Housing: Suitable up to 35 mm Equilibrium Float. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003eGrey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections which are then assembled once the restriction has passed. In a nutshell and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tanks construction and overall strength of the base. This will benefit the tank if its on uneven surfaces or positioned raise supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eTank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2100 x 2100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW6001 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 2000 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2192 x 2192 x 1973 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703806898501,"sku":"PW6001-1-AB.50mm.INS","price":4472.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926667571525,"sku":"PW6001-1-AB","price":3888.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4612_8127.jpg?v=1767800719"},{"product_id":"650-litre-type-ab-air-gap-grp-break-tank-insulated-cat-5","title":"650 Litre Type AB Air Gap GRP Break Tank, Insulated, Cat 5","description":"\u003ch2\u003e650 Litre Type AB Air Gap GRP Break Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003e\nOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003e\nAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\n\nNominal capacity = full capacity to top of tank\u003cbr\u003e\n\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raise supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied as standard with two built-in fixing pads, positioned at opposite ends of the tank.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1600 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e\n\n\t\u003ch3 style=\"text-align:left\"\u003ePW650-1-AB Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1067 x 610 x 1000 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1255 x 805 x 1419 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the Clean and Disinfection, please \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eclick here\u003c\/a\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703807357253,"sku":"PW650-1-AB50mmINS","price":1128.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926670684485,"sku":"PW650-1-AB","price":980.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4627_19167.jpg?v=1767875705"},{"product_id":"680-litre-type-ab-air-gap-grp-water-tank-one-piece-insulated-cat-5-wras","title":"680 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5, WRAS","description":"\u003ch2\u003e680 Litre GRP Water Tanks - Insulated (25 mm)\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW680 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1220 x 915 x 610 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1395 x 1087 x 1029 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1320 x 1015 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703807684933,"sku":"PW680-1-AB.50mm.INS","price":915.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926671667525,"sku":"PW680-1-AB","price":794.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43191_19964.jpg?v=1767875705"},{"product_id":"750-litre-grp-water-tank-with-insulation","title":"750 Litre GRP Water Tank with Insulation","description":"\u003ch2\u003e750 Litre GRP Water Tank - Insulated (25 mm) - Full WRAS approval.\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW750 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1500 x 1000 x 500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1702 x 1202 x 536 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\u003cp\u003ePlease note that all the Equilibrium valves are non-returnable \u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703809454405,"sku":"PW750-1-50mm.INS","price":805.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926674518341,"sku":"PW750-1","price":699.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4645_25980.jpg?v=1767800765"},{"product_id":"750-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"750 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e750 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1600 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW750-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1500 x 1000 x 500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1702 x 1202 x 916 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703809487173,"sku":"PW750-1-AB.50mm.INS","price":1055.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926674747717,"sku":"PW750-1-AB","price":915.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4646_8285.jpg?v=1767800767"},{"product_id":"909-litre-type-ab-air-gap-grp-break-tank-insulated-cat-5","title":"909 Litre Type AB Air Gap GRP Break Tank, Insulated, Cat 5","description":"\u003ch2\u003e909 Litre Type AB Air Gap GRP Break Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank, to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW909-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1168 x 890 x 890 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1330 x 1050 x 1309 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703810076997,"sku":"PW909-1-AB.50mm.INS","price":1080.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926683332933,"sku":"PW909-1-AB.","price":939.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4690_19970.jpg?v=1767875706"},{"product_id":"909-litre-grp-water-tank-insulated-stock-tank","title":"909 Litre GRP Water Tank, Insulated, Stock Tank","description":"\u003ch2\u003e909 Litre GRP Water Tank - Insulated (25mm)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note this tank is supplied with the following - \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- 25mm Insulation\u003cbr\u003e- Standard position pads\u003c\/p\u003e\n\u003cp\u003eIf a baseboard, drip tray, or support stand is required, please use the following code - \u003cstrong\u003e\u003ca href=\"https:\/\/www.tanks-direct.co.uk\/909-litre-grp-water-tank-insulated\/p4688\"\u003ePW909-1\u003c\/a\u003e. \u003c\/strong\u003eThe linked tank is a bespoke tank so will be made to order.\u003c\/p\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing process. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gelcoat layer which provides a clinically smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in the prevention of osmotic blistering. After the CFC-free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003eWhere access is a limiting factor and our one-piece GRP tanks are unsuitable a two-piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections which are then assembled once the restriction has passed. In a nutshell and a one-piece tank in two or more bolt-together sections. All of the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to the top of the tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned raise supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low-level connection pads, on the opposite end of the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW909 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd style=\"background-color:#addfff\"\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1168 x 890 x 890 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd style=\"background-color:#addfff\"\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1330 x 1050 x 930 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer acquiring the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed-priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS-qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works are available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS-approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703810175301,"sku":"PW909-1-ST","price":739.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/28085_18363.jpg?v=1767800803"},{"product_id":"125-litre-grp-water-tank-insulated-bundle","title":"125 Litre GRP Water Tank, Insulated - Bundle","description":"\u003ch2\u003e125 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval - Bundle\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nThis all-in-one bundle provides everything you need for a straightforward setup of your insulated GRP Water tank, ensuring a secure, and ready-to-use installation. Each component has been selected for reliability and compatibility with UK domestic and commercial water storage systems.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. View more information on our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/water-tanks\/grp-tanks\/two-piece-insulated-grp-break-tank\/c927\"\u003etwo piece GRP tank range\u003c\/a\u003e here.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003ch3\u003eBundle Includes:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e125 Litre One Piece GRP Insulated (25mm as standard) Water Tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Lid vent - Prevents vacuum formation and allows safe air exchange within the tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Equilibrium Float Valve - Maintains accurate water levels and prevents overflow by automatically controlling inflow\u003c\/li\u003e\n\n\t\u003cli\u003e35mm Overflow Extended - Provides an effective discharge route for excess water, ensuring system safety and WRAS compliance\u003c\/li\u003e\n\n\t\u003cli\u003e1 1\/4\" BSP Female Tank Connector Type 2 - Robust, watertight outlet connection for easy plumbing integration.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eIf the Encapsulated Baseboard, Support frame or any other bespoke options are required, please see the following product -\u003cspan style=\"color:#e74c3c\"\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.tanks-direct.co.uk\/125-litre-grp-water-tank-insulated\/p4288\"\u003e\u003cspan style=\"color:#e74c3c\"\u003ePW125-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW125-1 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd style=\"background-color:#addfff; text-align:center\"\u003e\u003cstrong\u003e Internal Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\n \u003ctd style=\"text-align:center\"\u003e 500 x 500 x 500 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd style=\"background-color:#addfff; text-align:center\"\u003e\u003cstrong\u003e External Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\n \u003ctd style=\"text-align:center\"\u003e 690 x 690 x 509 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003cp\u003eTogether, these components form a complete installation package, removing the need for additional fittings or accessories - everything required to install, connect, and operate your insulated GRP water tank efficiently and safely.\u003c\/p\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1–3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, please click \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703942852933,"sku":"PW125-1-22\/35","price":530.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/49131_26331.jpg?v=1767800437"},{"product_id":"160-litre-grp-water-tank-insulated-bundle","title":"160 Litre GRP Water Tank, Insulated - Bundle","description":"\u003ch2\u003e160 Litre GRP Water Tanks - Insulated (25 mm) Full WRAS approval.\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nThis all-in-one bundle provides everything you need for a straightforward setup of your insulated GRP Water tank, ensuring a secure, and ready-to-use installation. Each component has been selected for reliability and compatibility with UK domestic and commercial water storage systems.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. View more information on our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/water-tanks\/grp-tanks\/two-piece-insulated-grp-break-tank\/c927\"\u003etwo piece GRP tank range\u003c\/a\u003e here.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003ch3\u003eBundle Includes:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e160 Litre One Piece GRP Insulated (25mm as standard) Water Tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Lid vent - Prevents vacuum formation and allows safe air exchange within the tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Equilibrium Float Valve - Maintains accurate water levels and prevents overflow by automatically controlling inflow\u003c\/li\u003e\n\n\t\u003cli\u003e35mm Overflow Extended - Provides an effective discharge route for excess water, ensuring system safety and WRAS compliance\u003c\/li\u003e\n\n\t\u003cli\u003e1 1\/4\" BSP Female Tank Connector Type 2 - Robust, watertight outlet connection for easy plumbing integration.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eIf the Encapsulated Baseboard, Support frame or any other bespoke options are required, please see the following product - \u003cstrong\u003e\u003ca href=\"https:\/\/www.tanks-direct.co.uk\/160-litre-grp-water-tank-insulated\/p4340\"\u003e\u003cspan style=\"color:#e74c3c\"\u003ePW160-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low-level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW160-1 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e 760 x 460 x 460 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e 950 x 655 x 499 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, please click \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703944393029,"sku":"PW160-1-22\/35","price":555.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/49132_26334.jpg?v=1767800482"},{"product_id":"187-litre-grp-water-tank-insulated-bundle","title":"187 Litre GRP Water Tank, Insulated - Bundle","description":"\u003ch2\u003e187 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval - Bundle\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nThis all-in-one bundle provides everything you need for a straightforward setup of your insulated GRP Water tank, ensuring a secure, and ready-to-use installation. Each component has been selected for reliability and compatibility with UK domestic and commercial water storage systems.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003ch3\u003eBundle Includes:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e125 Litre One Piece GRP Insulated (25mm as standard) Water Tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Lid vent - Prevents vacuum formation and allows safe air exchange within the tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Equilibrium Float Valve - Maintains accurate water levels and prevents overflow by automatically controlling inflow\u003c\/li\u003e\n\n\t\u003cli\u003e35mm Overflow Extended - Provides an effective discharge route for excess water, ensuring system safety and WRAS compliance\u003c\/li\u003e\n\n\t\u003cli\u003e1 1\/4\" BSP Female Tank Connector Type 2 - Robust, watertight outlet connection for easy plumbing integration.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eIf the Encapsulated Baseboard, Support frame or any other bespoke options are required, please see the following product - \u003cstrong\u003e\u003ca href=\"https:\/\/www.tanks-direct.co.uk\/187-litre-grp-water-tank-insulated\/p4364\"\u003e\u003cspan style=\"color:#e74c3c\"\u003ePW187-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW187 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 750 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 690 x 690 x 759 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes my water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703944917317,"sku":"PW187-1-22\/35","price":580.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/49133_26335.jpg?v=1767800498"},{"product_id":"225-litre-grp-water-tank-insulated-bundle","title":"225 Litre GRP Water Tank, Insulated - Bundle","description":"\u003ch2\u003e225 Litre GRP Water Tanks - Insulated (25 mm) Full WRAS approval - Bundle\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one bundle provides everything you need for a straightforward setup of your insulated GRP Water tank, ensuring a secure, and ready-to-use installation. Each component has been selected for reliability and compatibility with UK domestic and commercial water storage systems.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003ch3\u003eBundle Includes:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e225 Litre One Piece GRP Insulated (25mm as standard) Water Tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Lid vent - Prevents vacuum formation and allows safe air exchange within the tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Equilibrium Float Valve - Maintains accurate water levels and prevents overflow by automatically controlling inflow\u003c\/li\u003e\n\n\t\u003cli\u003e35mm Overflow Extended - Provides an effective discharge route for excess water, ensuring system safety and WRAS compliance\u003c\/li\u003e\n\n\t\u003cli\u003e1 1\/4\" BSP Female Tank Connector Type 2 - Robust, watertight outlet connection for easy plumbing integration.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eIf the Encapsulated Baseboard, Support frame or any other bespoke options are required, please see the following product - \u003cstrong\u003e\u003ca href=\"https:\/\/www.tanks-direct.co.uk\/225-litre-grp-water-tank-insulated\/p4380\"\u003e\u003cspan style=\"color:#e74c3c\"\u003ePW225-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW225 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e 610 x 610 x 610 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e 805 x 805 x 649 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1 to 3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703945441605,"sku":"PW225-1-22\/35","price":585.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/49135_26338.jpg?v=1767800522"},{"product_id":"5625-litre-grp-water-tank-insulated","title":"5625 Litre GRP Water Tank, Insulated","description":"\u003ch2\u003e5625 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval.\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank, if its on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW5625 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2500 x 1500 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2694 x 1694 x 1593 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703949472069,"sku":"PW5652-1.50mm.INS","price":3865.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926661771589,"sku":"PW5625-1","price":3208.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4587_26003.jpg?v=1767800700"},{"product_id":"90-litre-grp-water-tank-insulated-bundle","title":"90 Litre GRP Water Tank, Insulated - Bundle","description":"\u003ch2\u003e90 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval - Bundle\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost) Only materials of the highest quality are used along with a highly efficient manufacturing process. This combination ensures that these tanks are of the highest quality available.\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one bundle provides everything you need for a straightforward setup of your insulated GRP Water tank, ensuring a secure, and ready-to-use installation. Each component has been selected for reliability and compatibility with UK domestic and commercial water storage systems.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinically smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in the prevention of osmotic blistering. Further reinforcement is provided by square-section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC-free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions.\u003cbr\u003e\nWhere access is a limiting factor and our one-piece GRP tanks are unsuitable, a two-piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one-piece tank in two or more bolt-together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. View more information on our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/water-tanks\/grp-tanks\/two-piece-insulated-grp-break-tank\/c927\"\u003etwo piece GRP tank range\u003c\/a\u003e here.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of the tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003ch3\u003eBundle Includes:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e90 Litre One Piece GRP Insulated (25mm as standard) Water Tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Lid vent - Prevents vacuum formation and allows safe air exchange within the tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Equilibrium Float Valve - Maintains accurate water levels and prevents overflow by automatically controlling inflow\u003c\/li\u003e\n\n\t\u003cli\u003e35mm Overflow Extended - Provides an effective discharge route for excess water, ensuring system safety and WRAS compliance\u003c\/li\u003e\n\n\t\u003cli\u003e1 1\/4\" BSP Female Tank Connector Type 2 - Robust, watertight outlet connection for easy plumbing integration.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eIf the Encapsulated Baseboard, Support frame or any other bespoke options are required, please see the following product - \u003cstrong\u003e\u003ca href=\"https:\/\/www.tanks-direct.co.uk\/90-litre-grp-water-tank-insulated\/p4674\"\u003e\u003cspan style=\"color:#e74c3c\"\u003ePW90-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low-level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW90 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd style=\"background-color:#addfff\"\u003e\n\n \u003cp style=\"text-align: center;\"\u003e Internal Dimensions\u003c\/p\u003e\n\n \u003c\/td\u003e\n\n \u003ctd style=\"text-align:center\"\u003e 610 x 305 x 510 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd style=\"background-color:#addfff; text-align:center\"\u003eExternal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e\n\n \u003cp style=\"text-align: center;\"\u003e 790 x 500 x 539 mm\u003c\/p\u003e\n\n \u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003cp\u003eTogether, these components form a complete installation package, removing the need for additional fittings or accessories - everything required to install, connect, and operate your insulated GRP water tank efficiently and safely.\u003c\/p\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer acquiring the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed-priced packages ranging from 1–3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS-qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works are available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS-approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, please click \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703954583877,"sku":"PW90-1-22\/35","price":475.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/49023_26199.jpg?v=1767800791"},{"product_id":"1000-litre-grp-water-tank-insulated","title":"1000 Litre GRP Water Tank, Insulated","description":"\u003ch2\u003e1000 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003ePlease note, the 1000 Litre stock tank is available as the 25 mm insulation Only. Please see the following link for the stocked tank \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/1000-litre-grp-water-tank-insulated-25mm.html\" target=\"_blank\"\u003ePW1000-1.\u003c\/a\u003e\u003cbr\u003e\n50 mm insulation, support Stand and baseboards please allow a longer lead time for delivery\u003cbr\u003e\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eNominal capacity = full capacity to top of tank\u003c\/li\u003e\n\n\t\u003cli\u003eActual capacity = float level\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW1000 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1000 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1180 x 1180 x 1093 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926538826053,"sku":"PW1000-1","price":905.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926538858821,"sku":"PW1000-1-50mm.INS","price":1041.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4235_25983.jpg?v=1769007197"},{"product_id":"1050-litre-grp-water-tank-insulated","title":"1050 Litre GRP Water Tank, Insulated","description":"\u003ch2\u003e1050 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1050-1 Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W X H)\u003c\/td\u003e\n \u003ctd\u003e 1500 x 500 x 1400 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1655 x 665 x 1453 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes my water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926542397765,"sku":"PW1050-1","price":1401.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926542430533,"sku":"PW1050-1.50mm.INS","price":1612.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4250_25984.jpg?v=1769007210"},{"product_id":"1050-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1050 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1050 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003eNominal capacity shown\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1050-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1500 x 500 x 1400 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1665 x 665 x 1833 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003e\n\nWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926542561605,"sku":"PW1050-1-AB","price":1610.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926542594373,"sku":"PW1050-1-AB.50mm.INS","price":1852.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4251_20058.jpg?v=1778768923"},{"product_id":"1125-litre-grp-water-tank-insulated","title":"1125 Litre GRP Water Tank, Insulated","description":"\u003ch2\u003e1125 Ltr GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank, if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1624 x 1015 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1125-1 Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1500 x 500 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n \u003cp\u003e External Dimensions (L x W x H)\u003c\/p\u003e\n \u003c\/td\u003e\n \u003ctd\u003e 1665 x 665 x 1553 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926544953669,"sku":"PW1125-1","price":1467.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926544986437,"sku":"PW1125-1.50mm.INS","price":1687.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4258_25985.jpg?v=1769007215"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/collections\/circle-item-c1437-b8171b02.jpg?v=1783591376","url":"https:\/\/tanks-direct.co.uk\/collections\/one-piece-insulated-grp-break-tanks.oembed?page=2","provider":"Tanks Direct","version":"1.0","type":"link"}