{"title":"GRP Sectional Divided TIF Airgap Tanks","description":"","products":[{"product_id":"2843-litre-grp-sectional-water-tank-totally-internally-flanged-divided-ab-airgap","title":"2843 Litre GRP Sectional Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e2843 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e2843 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cp\u003eScreened lid vent\u003cbr\u003eScreened overflow ¾' (22 mm) up to 4\" \u003cbr\u003eScreened warning pipe ¾' (22 mm)\u003cbr\u003eBSP female tank connector 1\" up to 4\" \u003cbr\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/p\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank formats and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 1x1x1 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2x1x1.TIF.AB.DIV(1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2843 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 1000 x 1000 x 1000 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2250 x 1250 x 1725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height Required 2075 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703791464773,"sku":"PW.2x1x1.TIF.AB.DIV(1+1)","price":4557.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46038_22228.jpg?v=1767875690"},{"product_id":"7627-litre-grp-sectional-water-tank-2x2x1-5-totally-internally-flanged-divided-ab-airgap","title":"7627 Litre GRP Sectional Water Tank, 2x2x1.5 Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e7627 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e7627 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 1 x 2 x 1.5 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2x2x1.5.TIF.AB.DIV(1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e7627 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 1000 x 2000 x 1500 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2250 x 2250 x 2225 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height required 2575 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703791923525,"sku":"PW.2x2x1.5.TIF-AB.DIV(1+1)","price":8755.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46164_22430.jpg?v=1767875690"},{"product_id":"7788-litre-grp-sectional-water-tank-totally-internally-flanged-divided-ab-airgap","title":"7788 Litre GRP Sectional Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e7788 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e7788 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 3 x 1 x 1 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.3x2x1.TIF.AB.DIV(1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e7788 litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 3000 x 1000 x 1000 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3250 x 2250 x 1725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height required 2075 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703794512197,"sku":"PW.3x2x1.TIF-AB.DIV(1+1)","price":8716.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46091_22304.jpg?v=1767875692"},{"product_id":"10260-litre-grp-sectional-water-tank-totally-internally-flanged-divided-ab-airgap","title":"10260 Litre GRP Sectional Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e10260 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e10260 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 2 x 2 x 1 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.4x2x1.TIF.AB.DIV(2+2) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e10260 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 2000 x 2000 x 1000 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e4250 x 2250 x 1725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height required 2075 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703795003717,"sku":"PW.4x2x1.TIF-AB.DIV(2+2)","price":9955.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/circle-item-c1446-4-e349c899.jpg?v=1768235522"},{"product_id":"23805-litre-grp-sectional-5x2x2-water-tank-totally-internally-flanged-divided-ab-airgap","title":"23805 Litre GRP Sectional 5x2x2 Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e23805 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e23805 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 No. 2.5 x 2 x 2 m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.5x2x2.TIF.AB.DIV(2.5+2.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e23,805 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - No. 2500 x 2000 x 2000 mm high compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e5250 x 2250 x 2725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height Required 3075 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703795528005,"sku":"PW.5x2x2.TIF.AB.DIV(2.5+2.5)","price":18548.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46284_22591.jpg?v=1767875693"},{"product_id":"3130-litre-grp-sectional-water-tank-totally-internally-flanged-divided-ab-airgap","title":"3130 Litre GRP Sectional Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e3130 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e3130 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 1x1x1 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.1.5x1x1.5.TIF.AB.DIV(1+0.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3130 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 1 x 1 x 1.5 \u0026amp; .5 x 1 x 1.5 mm High Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e1750 x 1250 x 2225 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one side - Height Required 2725 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703934333253,"sku":"PW.1.5x1x1.5.TIF.AB.DIV(1+0.5)","price":5180.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46150_22404.jpg?v=1767875653"},{"product_id":"2182-litre-grp-sectional-water-tank-totally-internally-flanged-divided-ab-airgap","title":"2182 Litre GRP Sectional Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e2182 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e2182 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cp\u003eScreened lid vent\u003cbr\u003eScreened overflow ¾' (22 mm) up to 4\" \u003cbr\u003eScreened warning pipe ¾' (22 mm)\u003cbr\u003eBSP female tank connector 1\" up to 4\" \u003cbr\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/p\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e1x1x1 \u0026amp; 0.5x1x1m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.1.5x1x1.TIF.AB.DIV(0.5+0.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2182 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 1x1x1 \u0026amp; 0.5x1x1m high compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e1750 x 1250 x 1725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height Required 2225 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703934529861,"sku":"PW.1.5x1x1.TIF.AB.DIV(0.5+0.5)","price":3995.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46034_22218.jpg?v=1767875654"},{"product_id":"4079-litre-grp-sectional-1-5x1x2-water-tank-totally-internally-flanged-divided-ab-airgap","title":"4079 Litre GRP Sectional 1.5x1x2 Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e4079 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e4079 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, Internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFxings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e1 x 1 x 2 \u0026amp; 0.5 x 1 x 2 m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.1.5x1x2.TIF.AB.DIV(1+0.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacoty\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e4079 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 1000 x 1000 x 2000 \u0026amp; 500 x 1000 x 2000 mm high compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e1750 x 1250 x 2725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - height required 3225 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703934792005,"sku":"PW.1.5x1x2.TIF.AB.DIV(1+0.5)","price":5948.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46246_22526.jpg?v=1767875654"},{"product_id":"2182-litre-grp-sectional-1x1x1-5-water-tank-totally-internally-flanged-divided-ab-airgap","title":"2182 Litre GRP Sectional 1x1x1.5 Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e2182 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e2182 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 No 500 x 1000 x 1500 mm high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.1x1x1.5.TIF.AB.DIV(0.5+0.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2182 litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No 500 x 1000 x 1500 high compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e1250 x 1120 x 2225 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height required 2725 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703935119685,"sku":"PW.1x1x1.5.TIF.AB.DIV(0.5+0.5)","price":4586.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46113_22332.jpg?v=1767875653"},{"product_id":"1520-litre-grp-sectional-water-tank-totally-internally-flanged-divided-ab-airgap","title":"1520 Litre GRP Sectional Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e1520 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e1520 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾'' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾'' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Base Tank (TIF) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 No 500 x 1000 x 1000 mm compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.1x1x1.TIF.AB.DIV(0.5+0.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e1520 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No 500 x 1000 x 1000 mm compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e1250 x 1250 x 1400 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50mm To 3 Sides, 600 mm to one face - Height required 2225 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703935316293,"sku":"PW.1x1x1.TIF.AB.DIV(0.5+0.5)","price":3378.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46026_22191.jpg?v=1767875653"},{"product_id":"2843-litre-grp-sectional-1x1x2-water-tank-totally-internally-flanged-divided-ab-airgap","title":"2843 Litre GRP Sectional 1x1x2 Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e2843 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e2843 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 No. 0.5 x 1 x 2 m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.1x1x2.TIF.AB.DIV(0.5+0.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2843 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No 500 x 1000 x 2000 high compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e1250 x 1250 x 22725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height required 3225 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703935578437,"sku":"PW.1x1x2.TIF.AB.DIV(0.5+0.5)","price":5252.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46241_22518.jpg?v=1767875654"},{"product_id":"9400-litre-grp-sectional-water-tank-2-5x2x1-5-totally-internally-flanged-divided-ab-airgap","title":"9400 Litre GRP Sectional Water Tank, 2.5x2x1.5 Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e9400 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e9400 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 2.5 x 1 x 1.5 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2.5x2x1.5.TIF.AB.DIV(1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e9400 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 2500 x 1000 x 1500 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2750 x 2250 x 2225 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height Required 2575 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703935873349,"sku":"PW.2.5x2x1.5.TIF-AB.DIV(1+1)","price":10315.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46169_22438.jpg?v=1767875654"},{"product_id":"6552-litre-grp-sectional-water-tank-totally-internally-flanged-divided-ab-airgap","title":"6552 Litre GRP Sectional Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e6552 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e6552 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 2.5 x 1 x 1 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2.5x2x1.TIF.AB.DIV(1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e6552 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 2500 x 1000 x 1000 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2750 x 2250 x 1725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height required 2075 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703936430405,"sku":"PW.2.5x2x1.TIF-AB.DIV(1+1)","price":8206.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46082_22287.jpg?v=1767875655"},{"product_id":"12249-litre-grp-sectional-2-5x2x2-water-tank-totally-internally-flanged-divided-ab-airgap","title":"12249 Litre GRP Sectional 2.5x2x2 Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e12249 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e12249 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 No. 2.5 x 1 x 2 m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2.5x2x2.TIF.AB.DIV(1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e12,249 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - No. 2500 x 1000 x 2000 mm high compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2750 x 2250 x 2400 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height required 3075 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703936627013,"sku":"PW.2.5x2x2.TIF.AB.DIV(1+1)","price":12660.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46262_22558.jpg?v=1767875654"},{"product_id":"5853-litre-grp-sectional-water-tank-totally-internally-flanged-divided-ab-airgap","title":"5853 Litre GRP Sectional Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e5853 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003ch3\u003e5853 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/h3\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 1 x 1.5 x 1.5 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2x1.5x1.5.TIF.AB.DIV(1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e5853 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 1000 x 1500 x 1500 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2250 x 1750 x 2225 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height Required 2575 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703936921925,"sku":"PW.2x1.5x1.5.TIF-AB.DIV(1+1)","price":7579.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46160_22420.jpg?v=1767875655"},{"product_id":"4079-litre-grp-sectional-water-tank-totally-internally-flanged-divided-ab-airgap","title":"4079 Litre GRP Sectional Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e4079 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e4079 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 1x1.5x1 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2x1.5x1.TIF.AB.DIV(1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e4079 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 1000 x 1500 x 1000 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2250 x 1750 x 1725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600mm to one face - Height required 2075 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703937052997,"sku":"PW.2x1.5x1.TIF.AB.DIV(1+1)","price":5948.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46071_22282.jpg?v=1767875655"},{"product_id":"7627-litre-grp-sectional-2x1-5x2-water-tank-totally-internally-flanged-divided-ab-airgap","title":"7627 Litre GRP Sectional 2x1.5x2 Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e7627 Litre Sectional Water Tank, Totally Internally Flanged (TIFB), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e7627 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 No. 1 x 1.5 x 2 m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2x1.5x2.TIF.AB.DIV(1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e7627 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - No. 1000 x 1500 x 2000 mm high compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2250 x 1750 x 2725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height requiired 3075 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703937446213,"sku":"PW.2x1.5x2.TIF.AB.DIV(1+1)","price":9093.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46254_22542.jpg?v=1767875656"},{"product_id":"4079-litre-grp-sectional-water-tank-2x1x1-5-totally-internally-flanged-divided-ab-airgap","title":"4079 Litre GRP Sectional Water Tank (2x1x1.5), Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e4079 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e4079 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 1x1x1 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2x1x1.5.TIF.AB.DIV(1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e4079 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 1000 x 1000 x 1500 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2250 x 1250 x 2225 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height required 2725 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703937806661,"sku":"PW.2x1x1.5.TIF.AB.DIV(1+1)","price":5853.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46156_22412.jpg?v=1767875656"},{"product_id":"5315-litre-grp-sectional-2x1x2-water-tank-totally-internally-flanged-divided-ab-airgap","title":"5315 Litre GRP Sectional 2x1x2 Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e5315 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e5315 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 No. 1 x 1 x 2 m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2x1x2.TIF.AB.DIV(1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e5315 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - No. 1000 x 1000 x 2000 mm high compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2250 x 1250 x 2725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height Required 3225 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703937970501,"sku":"PW.2x1x2.TIF.AB.DIV(1+1)","price":6702.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46250_22534.jpg?v=1767875656"},{"product_id":"5315-litre-grp-sectional-water-tank-totally-internally-flanged-divided-ab-airgap","title":"5315 Litre GRP Sectional Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e5315 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e5315 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 1 x 2 x 1 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2x2x1.TIF.AB.DIV(1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e5315 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 1000 x 2000 x 1000 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2250 x 2250 x 1725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height required 2075 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703938330949,"sku":"PW.2x2x1.TIF-AB.DIV(1+1)","price":6996.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46076_22283.jpg?v=1767875656"},{"product_id":"9938-litre-grp-sectional-2x2x2-water-tank-totally-internally-flanged-divided-ab-airgap","title":"9938 Litre GRP Sectional 2x2x2 Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e9938 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e9938 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 No. 1 x 2 x 2 m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2x2x2.TIF.AB.DIV(1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e9938 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - No. 1000 x 2000 x 2000 mm high compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2250 x 2250 x 2725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height required 3075 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703938527557,"sku":"PW.2x2x2.TIF.AB.DIV(1+1)","price":10430.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46258_22550.jpg?v=1767875656"},{"product_id":"5977-litre-grp-sectional-water-tank-3x1x1-5-totally-internally-flanged-divided-ab-airgap","title":"5977 Litre GRP Sectional Water Tank (3x1x1.5), Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e5977 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e5977 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 1.5 x 1 x 1.5 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.3x1x1.5.TIF.AB.DIV(1.5+1.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e5977 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 1500 x 1000 x 1500 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3250 x 1250 x 2225 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height required 2575 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703938986309,"sku":"PW.3x1x1.5.TIF.AB.DIV(1.5+1.5)","price":7863.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46173_22453.jpg?v=1767875658"},{"product_id":"4165-litre-grp-3x1x1-sectional-water-tank-totally-internally-flanged-divided-ab-airgap","title":"4165 Litre GRP 3x1x1 Sectional Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e4165 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e4165 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 1.5 x 1 x 1 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.3x1x1.TIF.AB.DIV(1.5+1.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e4165 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 1500 x 1000 x 1000 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3250 x 1250 x 1725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height required 2075 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1–3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703939182917,"sku":"PW.3x1x1.TIF.AB.DIV(1.5+1.5)","price":6025.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46087_22296.jpg?v=1767875657"},{"product_id":"7788-litre-grp-sectional-3x1x2-water-tank-totally-internally-flanged-divided-ab-airgap","title":"7788 Litre GRP Sectional 3x1x2 Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e7788 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e7788 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 No. 1.5 x 1 x 2 m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.3x1x2.TIF.AB.DIV(1.5+1.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e7788 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - No. 1500 x 1000 x 2000 mm high compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3250 x 1250 x 2725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height required 3075 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703939379525,"sku":"PW.3x1x2.TIF.AB.DIV(1.5+1.5)","price":9260.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46266_22566.jpg?v=1767875657"},{"product_id":"11174-litre-grp-sectional-water-tank-totally-internally-flanged-divided-ab-airgap","title":"11174 Litre GRP Sectional Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e11174 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e11174 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 3 x 1 x 1.5 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.3x2x1.5.TIF.AB.DIV(1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e11,174 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 3000 x 1000 x 1500 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3250 x 2250 x 2225 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height Required 2575 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703939707205,"sku":"PW.3x2x1.5.TIF-AB.DIV(1+1)","price":10999.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46214_22491.jpg?v=1767875657"},{"product_id":"14560-litre-grp-sectional-3x2x2-water-tank-totally-internally-flanged-divided-ab-airgap","title":"14560 Litre GRP Sectional 3x2x2 Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e14560 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e14560 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 No. 3 x 1 x 2 m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.3x2x2.TIF.AB.DIV(1.5+1.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e14,560 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - No. 3000 x 1000 x 2000 mm high compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3250 x 2250 x 2400 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height required 2900 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703940100421,"sku":"PW.3x2x2.TIF.AB.DIV(1.5+1.5)","price":13825.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46274_22589.jpg?v=1767875657"},{"product_id":"14722-litre-grp-sectional-water-tank-totally-internally-flanged-divided-ab-airgap","title":"14722 Litre GRP Sectional Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e14722 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e14722 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIFB) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 2 x 2 x 1.5 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.4x2x1.5.TIF.AB.DIV(2+2) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e14,722 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 2000 x 2000 x 1500 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e4250 x 2250 x 2225 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height Required 2575 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703940329797,"sku":"PW.4x2x1.5.TIF-AB.DIV(2+2)","price":12505.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46220_22501.jpg?v=1767875658"},{"product_id":"19183-litre-grp-sectional-4x2x2-water-tank-totally-internally-flanged-divided-ab-airgap","title":"19183 Litre GRP Sectional 4x2x2 Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e19183 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e19183 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 No. 2 x 2 x 2 m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.4x2x2.TIF.AB.DIV(2+2) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e19,183 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - No. 2000 x 2000 x 2000 mm high compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e4250 x 2250 x 2725 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height Required 3075 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703940723013,"sku":"PW.4x2x2.TIF.AB.DIV(2+2)","price":15150.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46280_22590.jpg?v=1767875658"},{"product_id":"18269-litre-grp-sectional-water-tank-totally-internally-flanged-divided-ab-airgap","title":"18269 Litre GRP Sectional Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e18269 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e18269 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 2.5 x 2 x 1.5 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.5x2x1.5.TIF.AB.DIV(2.5+2.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e18,269 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 2500 x 2000 x 1500 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e5250 x 2250 x 2225 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height require 2575 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703941083461,"sku":"PW.5x2x1.5.TIF-AB.DIV(2.5+2.5)","price":15237.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46237_22510.jpg?v=1767875659"},{"product_id":"12733-litre-grp-sectional-water-tank-totally-internally-flanged-divided-ab-airgap","title":"12733 Litre GRP Sectional Water Tank, Totally Internally Flanged, Divided, AB Airgap","description":"\u003ch2\u003e12733 Litre Sectional Water Tank, Totally Internally Flanged (TIF), Divided, AB Airgap\u003c\/h2\u003e\n\u003cp\u003e12733 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and internally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTIF tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eTIF tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eA Totally Internally Flanged Tank (TIF) is one of the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, internally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 38 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eFixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 2.5 x 2 x 1 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.5x2x1.TIF.AB.DIV(2.5+2.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eAB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Nominal Capacity\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e12733 Litres\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 2500 x 2000 x 1000 mm Compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e5250 x 2250 x 1400 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e50 mm to 3 sides, 600 mm to one face - Height required 1900 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703941411141,"sku":"PW.5x2x1.TIF-AB.DIV(2.5+2.5)","price":12084.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/46109_22324.jpg?v=1767875660"}],"url":"https:\/\/tanks-direct.co.uk\/collections\/grp-sectional-divided-tif-airgap-tanks.oembed","provider":"Tanks Direct","version":"1.0","type":"link"}