{"title":"GRP Sectional Divided IFB Tanks","description":"","products":[{"product_id":"1500-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"1500 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e1500 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e1500 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cp\u003eScreened lid vent\u003cbr\u003eScreened overflow ¾' (22 mm) up to 4\" \u003cbr\u003eScreened warning pipe ¾' (22 mm)\u003cbr\u003eBSP female tank connector 1\" up to 4\" \u003cbr\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/p\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e1x1x1 \u0026amp; 0.5x1x1m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.1.5x1x1.IFB-AG.DIV (1+0.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 1x1x1 \u0026amp; 0.5x1x1m high compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e650x1150x1250mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2650x2150x1750mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703789302085,"sku":"PW.1.5x1x1.IFB-AG.DIV (1+0.5)","price":1958.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/35892_18833.jpg?v=1767875748"},{"product_id":"1500-litre-grp-sectional-water-tank-1x1x1-5-0-5-0-5-internally-flanged-base-ifb-divided","title":"1500 Litre GRP Sectional Water Tank, 1x1x1.5(0.5+0.5) Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e1500 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e1500 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cp\u003eScreened lid vent\u003cbr\u003eScreened overflow ¾' (22 mm) up to 4\" \u003cbr\u003eScreened warning pipe ¾' (22 mm)\u003cbr\u003eBSP female tank connector 1\" up to 4\" \u003cbr\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/p\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e0.5x1x1.5 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.1x1x1.5.IFB-AG.DIV (0.5+0.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Airgap\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Single or twin compartment (Divided)\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 500 x 1000 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e External Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e1150 x 1150 x 1750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Assembly area required\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2150 x 2150 x 2250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703789629765,"sku":"PW.1x1x1.5.IFB-AG.DIV (0.5+0.5)","price":1992.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38099_19139.jpg?v=1767875687"},{"product_id":"1000-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"1000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e1000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e1000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾'' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾'' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 No 500x1000x1000mm compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.1x1x1.IFB-AG.DIV (0.5+0.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No 500x1000x1000mm compartments\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e1150x1150x1250mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2150x2150x1750mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP Sectional tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703789924677,"sku":"PW.1x1x1.IFB-AG.DIV (0.5+0.5)","price":1518.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/circle-item-c1436-3-7caa7430.jpg?v=1768235496"},{"product_id":"5000-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"5000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e5000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e5000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cp\u003eScreened lid vent\u003cbr\u003eScreened overflow ¾' (22 mm) up to 4\" \u003cbr\u003eScreened warning pipe ¾' (22 mm)\u003cbr\u003eBSP female tank connector 1\" up to 4\" \u003cbr\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/p\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2.5x1x1 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2.5x2x1.IFB-AG.DIV (0.5+0.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 2500 x 1000 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2650 x 2150 x 1250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3650 x 3150 x 1750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703790285125,"sku":"PW.2.5x2x1.IFB-AG.DIV (1+1)","price":4114.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38092_19126.jpg?v=1767875688"},{"product_id":"3000-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"3000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e3000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e3000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cp\u003eScreened lid vent\u003cbr\u003eScreened overflow ¾' (22 mm) up to 4\" \u003cbr\u003eScreened warning pipe ¾' (22 mm)\u003cbr\u003eBSP female tank connector 1\" up to 4\" \u003cbr\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/p\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e1.5x1x1 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.3x1x1.IFB-AG.DIV (1.5+1.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 1500 x 1000 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3150 x 1150 x 1250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e4150 x 2150 x 1750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703790711109,"sku":"PW.3x1x1.IFB-AG.DIV (1.5+1.5)","price":2980.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38404_19154.jpg?v=1767875688"},{"product_id":"6000-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"6000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e6000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e6000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e1.5 x 1 x 2 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.3x1x2.IFB-AG.DIV (1.5+1.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 1500 x 1000 x 2000 m\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3150 x 1450 x 2250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e4150 x 2450 x 2750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703790940485,"sku":"PW.3x1x2.IFB-AG.DIV (1.5+1.5)","price":4259.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38095_19136.jpg?v=1767875690"},{"product_id":"2000-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"2000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e2000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e2000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cp\u003eScreened lid vent\u003cbr\u003eScreened overflow ¾' (22 mm) up to 4\" \u003cbr\u003eScreened warning pipe ¾' (22 mm)\u003cbr\u003eBSP female tank connector 1\" up to 4\" \u003cbr\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/p\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e1x1x1 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2x1x1.IFB-AG.DIV (1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 1000 x 1000 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2150 x 1150 x 1250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3150 x 2150 x 1750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703791333701,"sku":"PW.2x1x1.IFB-AG.DIV (1+1)","price":2345.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38334_19152.jpg?v=1767875690"},{"product_id":"4000-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"4000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e4000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e4000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e1 x 1 x 2 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2x1x2.IFB-AG.DIV (1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 1000 x 1000 x 2000 m\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2150 x 1150 x 2250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3150 x 2150 x 2750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703791694149,"sku":"PW.2x1x2.IFB-AG.DIV (1+1)","price":3163.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38091_19125.jpg?v=1767875690"},{"product_id":"8000-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"8000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e8000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e8000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e1 x 2 x 2 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2x2x2.IFB-AG.DIV (1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 1000 x 2000 x 2000 m\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2450 x 2150 x 2250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3450 x 3150 x 2750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703792939333,"sku":"PW.2x2x2.IFB-AG.DIV (1+1)","price":5075.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38096_19137.jpg?v=1767875691"},{"product_id":"4500-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"4500 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e4500 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e4500 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cp\u003eScreened lid vent\u003cbr\u003eScreened overflow ¾' (22 mm) up to 4\" \u003cbr\u003eScreened warning pipe ¾' (22 mm)\u003cbr\u003eBSP female tank connector 1\" up to 4\" \u003cbr\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/p\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e1.5 x 1 x 1.5 m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.3x1x1.5.IFB-AG.DIV (1.5+1.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Airgap\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Single or twin compartment (Divided)\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 1500 x 1000 x 1500 mm \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e External Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3150 x 1450 x 1750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Assembly area required\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e4150 x 2450 x 2250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703793037637,"sku":"PW.3x1x1.5.IFB-AG.DIV (1.5+1.5)","price":3780.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38102_19143.jpg?v=1767875692"},{"product_id":"9000-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"9000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e9000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e9000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cp\u003eScreened lid vent\u003cbr\u003eScreened overflow ¾' (22 mm) up to 4\" \u003cbr\u003eScreened warning pipe ¾' (22 mm)\u003cbr\u003eBSP female tank connector 1\" up to 4\" \u003cbr\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/p\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e3 x 1 x 1.5 m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.3x2x1.5.IFB-AG.DIV (1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Airgap\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Single or twin compartment (Divided)\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 3000 x 1000 x 1500 mm \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e External Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3150 x 2450 x 1750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Assembly area required\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e4150 x 3450 x 2250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703793627461,"sku":"PW.3x2x1.5.IFB-AG.DIV (1+1)","price":5758.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38107_19148.jpg?v=1767875692"},{"product_id":"12000-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"12000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e12000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e12000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 2 x 1.5 m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.4x2x1.5.IFB-AG.DIV (2+2) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Airgap\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Single or twin compartment (Divided)\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 2000 x 2000 x 1500 mm \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e External Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e4450 x 2450 x 1750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Assembly area required\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e5450 x 3450 x 2250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703794741573,"sku":"PW.4x2x1.5.IFB-AG.DIV (2+2)","price":6630.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38410_19160.jpg?v=1767875692"},{"product_id":"16000-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"16000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e16000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e16000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2 x 2 x 2 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.4x2x2.IFB-AG.DIV (2+2) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2000 x 2000 x 2000 m\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e4450 x 2450 x 2250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e5450 x 3450 x 2750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703795069253,"sku":"PW.4x2x2.IFB-AG.DIV (2+2)","price":7720.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38411_19161.jpg?v=1767875693"},{"product_id":"15000-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"15000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e15000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e15000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2.5 x 2 x 1.5 m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.5x2x1.5.IFB-AG.DIV (2+2) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Airgap\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Single or twin compartment (Divided)\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 2500 x 2000 x 1500 mm \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e External Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e5450 x 2450 x 1750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Assembly area required\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e6450 x 3450 x 2250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703795233093,"sku":"PW.5x2x1.5.IFB-AG.DIV (2.5+2.5)","price":8260.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38333_19151.jpg?v=1767875693"},{"product_id":"2250-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"2250 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e2250 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e2250 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cp\u003eScreened lid vent\u003cbr\u003eScreened overflow ¾' (22 mm) up to 4\" \u003cbr\u003eScreened warning pipe ¾' (22 mm)\u003cbr\u003eBSP female tank connector 1\" up to 4\" \u003cbr\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/p\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e1 x 1 x 1.5 m high \u0026amp; 0.5 x 1 x 1.5 m compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.1.5x1x1.5.IFB-AG.DIV (1+0.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Airgap\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Single or twin compartment (Divided)\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 1 x 1 x 1.5 \u0026amp; 0.5 x 1 x 1.5 m high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e External Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e1650 x 1450 x 1750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Assembly area required\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2650 x 2450 x 2250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703934300485,"sku":"PW.1.5x1x1.5.IFB-AG.DIV (1+0.5)","price":2397.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38100_19140.jpg?v=1767875652"},{"product_id":"7500-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"7500 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e7500 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e7500 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cp\u003eScreened lid vent\u003cbr\u003eScreened overflow ¾' (22 mm) up to 4\" \u003cbr\u003eScreened warning pipe ¾' (22 mm)\u003cbr\u003eBSP female tank connector 1\" up to 4\" \u003cbr\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/p\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2.5 x 1 x 1.5 m high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2.5x2x1.5.IFB-AG.DIV (1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Airgap\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Single or twin compartment (Divided)\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2 No. 2500 x 1000 x 1500 mm \u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e External Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2650 x 2450 x 1750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\u003cstrong\u003e Assembly area required\u003c\/strong\u003e\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3650 x 3450 x 2250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703935742277,"sku":"PW.2.5x2x1.5.IFB-AG.DIV (1+1)","price":5335.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38105_19146.jpg?v=1767875655"},{"product_id":"10000-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"10000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e10000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e10000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2.5 x 1 x 2 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.2.5x2x2.IFB-AG.DIV (1+1) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2500 x 1000 x 2000 m\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e2650 x 2450 x 2250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e3650 x 3450 x 2750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703936528709,"sku":"PW.2.5x2x2.IFB-AG.DIV (1+1)","price":6423.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38097_19138.jpg?v=1767875654"},{"product_id":"20000-litre-grp-sectional-water-tank-internally-flanged-base-ifb-divided","title":"20000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided","description":"\u003ch2\u003e20000 Litre GRP Sectional Water Tank, Internally Flanged Base (IFB) Divided\u003c\/h2\u003e\n\u003cp\u003e20000 Litre GRP Sectional Water Tank, a sectional tank with an internally flanged base and externally flanged sides. Modular construction utilising bolt together panels suitable for on-site assembly.\u003c\/p\u003e\n\u003ch3\u003eWhat's the Divided Section for in a sectional tank?\u003c\/h3\u003e\n\u003cp\u003eTanks with an internal division, which is also known as a maintenance division, are suitable for buildings that we require an uninterrupted water supply during periods of maintenance to the tank. The internal divider creates two isolated compartments within a single tank, which enables one side of the tank to be taken out of service for maintenance, whilst water supply is maintained to the building via the second compartment of the tank.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: divided tanks are essentially two separate tanks \u0026amp; therefore require double the quantity of connections, i.e. 2 x inlet connections \u0026amp; 2 x outlet connections to the down services. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eInsulated and WRAS approved for use with potable water. Suitable for a variety of applications including process cooling, rainwater harvesting and many other systems and processes where containment of water is necessary. All gaskets, seals and fixings for assembly are included. Available for self-assembly, or on site assembly is available by qualified engineers for an additional cost.\u003c\/p\u003e\n\u003cp\u003eIFB tanks are suitable for positioning onto a flat, level and continuous foundation, normally a structural concrete slab. \u003c\/p\u003e\n\u003cp\u003eIFB tanks require a minimum of 500 mm working clearance all around the tank, a minimum of 500 mm above the man-way height and\/or 350 mm above any raised float valve housing. \u003c\/p\u003e\n\u003ch3\u003eOptional Extras:\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eScreened lid vent\u003c\/li\u003e\n\t\u003cli\u003eScreened overflow ¾' (22 mm) up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eScreened warning pipe ¾' (22 mm)\u003c\/li\u003e\n\t\u003cli\u003eBSP female tank connector 1\" up to 4\" \u003c\/li\u003e\n\t\u003cli\u003eLid mounted level switch to suit high or low warning Temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eImportant: All water storage tanks supplying water to a potable system require pre-commission cleaning and sterilisation, we can also carry out this work and issue the appropriate certificates. \u003c\/p\u003e\n\u003cp\u003eAn Internally Flanged Base Tank (IFB) is the most cost-effective sectional tank format and is suitable for: Positioning onto a flat, solid, level and continuous foundation.\u003c\/p\u003e\n\u003cp\u003eApplications where there is sufficient working room all around the tank.\u003c\/p\u003e\n\u003cp\u003eComprising: Internally flanged base, externally flanged sides, internally flanged roof. \u003c\/p\u003e\n\u003cp\u003eInsulated to the sides and cover only.\u003c\/p\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eInsulation: 50 mm Fully Encapsulated to Sides\u003c\/li\u003e\n\t\u003cli\u003ePanel Size: 1000 x 1000 mm\u003c\/li\u003e\n\t\u003cli\u003eSide Panels: Externally Flanged\u003c\/li\u003e\n\t\u003cli\u003eBase Panels: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eHeavy Duty Lid: Internally Flanged\u003c\/li\u003e\n\t\u003cli\u003eInternal fixings: Stainless Steel\u003c\/li\u003e\n\t\u003cli\u003eExternal fixings: Galvanised\u003c\/li\u003e\n\t\u003cli\u003eMan way: Included, providing 800 x 800 mm access opening\u003c\/li\u003e\n\t\u003cli\u003e2.5 x 2 x 2 high compartments (divided sections)\u003c\/li\u003e\n\t\u003cli\u003eFoundation Levelling Steels: Included (To suit flat structural foundation pad)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW.5x2x2.IFB-AG.DIV (2.5+2.5) Dimensions\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Airgap\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e AG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Single or twin compartment (Divided)\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003eTwin - 2500 x 2000 x 2000 m\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e5450 x 2450 x 2250 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Assembly area required\u003c\/td\u003e\n \u003ctd style=\"text-align:center\"\u003e6450 x 3450 x 2750 mm high\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703941673285,"sku":"PW.5x2x2.IFB-AG.DIV (2.5+2.5)","price":9516.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/38412_19162.jpg?v=1767875659"}],"url":"https:\/\/tanks-direct.co.uk\/collections\/grp-sectional-divided-ifb-tanks.oembed?page=2","provider":"Tanks Direct","version":"1.0","type":"link"}