{"title":"GRP Break Tanks","description":"","products":[{"product_id":"1000-litre-divided-grp-water-tank-insulated","title":"1000 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1000 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1000 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1000mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1160 x 1160 x 1093mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703942000965,"sku":"PW1000-1-DIV","price":1265.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/circle-item-c1563-1-6989052c.jpg?v=1768235516"},{"product_id":"1050-litre-divided-grp-water-tank-insulated","title":"1050 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1050 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1050 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 500 x 1100mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1665 x 665 x 1140mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703942066501,"sku":"PW1050-1-DIV","price":1793.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48290_25245.jpg?v=1767875660"},{"product_id":"1050-litre-two-piece-divided-grp-water-tank-insulated","title":"1050 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1050 Litre Two Piece Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1050 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 500 x 1100mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1665 x 665 x 1140mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703942164805,"sku":"PW1050-2-DIV","price":2258.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48380_25363.jpg?v=1767875660"},{"product_id":"1125-litre-divided-grp-water-tank-insulated","title":"1125 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1125 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1125 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 500 x 1500mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1665 x 665 x 1577mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703942230341,"sku":"PW1125-1-DIV","price":1806.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48292_25248.jpg?v=1767875660"},{"product_id":"1125-litre-two-piece-divided-grp-water-tank-insulated","title":"1125 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1125 Litre Two Piece Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1125 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 500 x 1500mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1665 x 665 x 1577mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703942295877,"sku":"PW1125-2-DIV","price":2325.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48381_25365.jpg?v=1767875660"},{"product_id":"1135-litre-divided-grp-water-tank-insulated","title":"1135  Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1135 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1135 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1524 x 915 x 812mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1680 x 1080 x 905mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703942361413,"sku":"PW1135-1-DIV","price":1385.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48311_25260.jpg?v=1767875661"},{"product_id":"12000-litre-divided-grp-water-tank-insulated","title":"12000 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e12000 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW12000 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 3000 x 2000 x 2000mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 3192 x 2192 x 2093mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703942525253,"sku":"PW12000-1-DIV","price":6390.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48340_25315.jpg?v=1767875661"},{"product_id":"1220-litre-divided-grp-water-tank-insulated","title":"1220 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1220 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1220 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1220mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1165 x 1165 x 1313mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703942721861,"sku":"PW1220-1-DIV","price":1508.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48313_25264.jpg?v=1767875660"},{"product_id":"125-litre-grp-water-tank-insulated-bundle","title":"125 Litre GRP Water Tank, Insulated - Bundle","description":"\u003ch2\u003e125 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval - Bundle\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nThis all-in-one bundle provides everything you need for a straightforward setup of your insulated GRP Water tank, ensuring a secure, and ready-to-use installation. Each component has been selected for reliability and compatibility with UK domestic and commercial water storage systems.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. View more information on our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/water-tanks\/grp-tanks\/two-piece-insulated-grp-break-tank\/c927\"\u003etwo piece GRP tank range\u003c\/a\u003e here.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003ch3\u003eBundle Includes:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e125 Litre One Piece GRP Insulated (25mm as standard) Water Tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Lid vent - Prevents vacuum formation and allows safe air exchange within the tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Equilibrium Float Valve - Maintains accurate water levels and prevents overflow by automatically controlling inflow\u003c\/li\u003e\n\n\t\u003cli\u003e35mm Overflow Extended - Provides an effective discharge route for excess water, ensuring system safety and WRAS compliance\u003c\/li\u003e\n\n\t\u003cli\u003e1 1\/4\" BSP Female Tank Connector Type 2 - Robust, watertight outlet connection for easy plumbing integration.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eIf the Encapsulated Baseboard, Support frame or any other bespoke options are required, please see the following product -\u003cspan style=\"color:#e74c3c\"\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.tanks-direct.co.uk\/125-litre-grp-water-tank-insulated\/p4288\"\u003e\u003cspan style=\"color:#e74c3c\"\u003ePW125-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW125-1 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd style=\"background-color:#addfff; text-align:center\"\u003e\u003cstrong\u003e Internal Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\n \u003ctd style=\"text-align:center\"\u003e 500 x 500 x 500 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd style=\"background-color:#addfff; text-align:center\"\u003e\u003cstrong\u003e External Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\n \u003ctd style=\"text-align:center\"\u003e 690 x 690 x 509 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003cp\u003eTogether, these components form a complete installation package, removing the need for additional fittings or accessories - everything required to install, connect, and operate your insulated GRP water tank efficiently and safely.\u003c\/p\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1–3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, please click \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703942852933,"sku":"PW125-1-22\/35","price":530.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/49131_26331.jpg?v=1767800437"},{"product_id":"1364-litre-divided-grp-water-tank-insulated","title":"1364 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1364 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1364 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1370 x 1092 x 915mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1570 x 1290 x 1008mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703943082309,"sku":"PW1364-1-DIV","price":1525.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48382_25367.jpg?v=1767875661"},{"product_id":"1364-litre-grp-water-tank","title":"1364 Litre GRP Water Tank","description":"\u003ch2\u003e1364 Litre GRP Water Tank\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1364 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1370 x 1092 x 915 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1570 x 1290 x 1008 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003e\n\nWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703943311685,"sku":"PW1364-UN","price":1133.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4305_25546.jpg?v=1767800458"},{"product_id":"1500-litre-divided-grp-water-tank-insulated","title":"1500 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1500 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1500 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 1000 x 1000mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1702 x 1202 x 1093mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703943409989,"sku":"PW1500-1-DIV","price":1506.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48314_25265.jpg?v=1767875661"},{"product_id":"1500-litre-two-piece-divided-grp-water-tank-insulated","title":"1500 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1500 Litre Two Piece Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1500 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 1000 x 1000mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1702 x 1202 x 1093mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703943475525,"sku":"PW1500-2-DIV","price":2131.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48384_25369.jpg?v=1767875661"},{"product_id":"1501-litre-divided-grp-water-tank-insulated","title":"1501 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1501 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1501 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1500mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1160 x 1160 x 1593mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOtional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703943573829,"sku":"PW1501-1-DIV","price":1875.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48315_25268.jpg?v=1767875661"},{"product_id":"1501-litre-two-piece-divided-grp-water-tank-insulated","title":"1501 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1501 Litre Two Piece Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1501 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1500mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1160 x 1160 x 1593mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOtional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703944098117,"sku":"PW1501-2-DIV","price":2451.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48385_25371.jpg?v=1767875661"},{"product_id":"1590-litre-divided-grp-water-tank-insulated","title":"1590 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1590 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1590 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1524 x 1143 x 915mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1700 x 1310 x 1008mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703944196421,"sku":"PW1590-1-DIV","price":1602.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48316_25270.jpg?v=1767875662"},{"product_id":"1590-litre-two-piece-divided-grp-water-tank-insulated","title":"1590 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1590 Litre Two Piece Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1590 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1524 x 1143 x 915mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1700 x 1310 x 1008mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703944294725,"sku":"PW1590-2-DIV","price":2142.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48386_25373.jpg?v=1767875662"},{"product_id":"160-litre-grp-water-tank-insulated-bundle","title":"160 Litre GRP Water Tank, Insulated - Bundle","description":"\u003ch2\u003e160 Litre GRP Water Tanks - Insulated (25 mm) Full WRAS approval.\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nThis all-in-one bundle provides everything you need for a straightforward setup of your insulated GRP Water tank, ensuring a secure, and ready-to-use installation. Each component has been selected for reliability and compatibility with UK domestic and commercial water storage systems.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. View more information on our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/water-tanks\/grp-tanks\/two-piece-insulated-grp-break-tank\/c927\"\u003etwo piece GRP tank range\u003c\/a\u003e here.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003ch3\u003eBundle Includes:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e160 Litre One Piece GRP Insulated (25mm as standard) Water Tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Lid vent - Prevents vacuum formation and allows safe air exchange within the tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Equilibrium Float Valve - Maintains accurate water levels and prevents overflow by automatically controlling inflow\u003c\/li\u003e\n\n\t\u003cli\u003e35mm Overflow Extended - Provides an effective discharge route for excess water, ensuring system safety and WRAS compliance\u003c\/li\u003e\n\n\t\u003cli\u003e1 1\/4\" BSP Female Tank Connector Type 2 - Robust, watertight outlet connection for easy plumbing integration.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eIf the Encapsulated Baseboard, Support frame or any other bespoke options are required, please see the following product - \u003cstrong\u003e\u003ca href=\"https:\/\/www.tanks-direct.co.uk\/160-litre-grp-water-tank-insulated\/p4340\"\u003e\u003cspan style=\"color:#e74c3c\"\u003ePW160-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low-level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW160-1 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e 760 x 460 x 460 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e 950 x 655 x 499 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, please click \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703944393029,"sku":"PW160-1-22\/35","price":555.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/49132_26334.jpg?v=1767800482"},{"product_id":"1818-litre-divided-grp-water-tank-insulated","title":"1818 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1818 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1818 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1220 x 1220 x 1220mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1390 x 1390 x 1313mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703944589637,"sku":"PW1818-1-DIV","price":1798.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48318_25271.jpg?v=1767875663"},{"product_id":"1818-litre-two-piece-divided-grp-water-tank-insulated","title":"1818 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e1818 Litre Two Piece Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW1818 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1220 x 1220 x 1220mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1390 x 1390 x 1313mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703944687941,"sku":"PW1818-2-DIV","price":2327.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48387_25374.jpg?v=1767875662"},{"product_id":"187-litre-grp-water-tank-insulated-bundle","title":"187 Litre GRP Water Tank, Insulated - Bundle","description":"\u003ch2\u003e187 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval - Bundle\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nThis all-in-one bundle provides everything you need for a straightforward setup of your insulated GRP Water tank, ensuring a secure, and ready-to-use installation. Each component has been selected for reliability and compatibility with UK domestic and commercial water storage systems.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003ch3\u003eBundle Includes:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e125 Litre One Piece GRP Insulated (25mm as standard) Water Tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Lid vent - Prevents vacuum formation and allows safe air exchange within the tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Equilibrium Float Valve - Maintains accurate water levels and prevents overflow by automatically controlling inflow\u003c\/li\u003e\n\n\t\u003cli\u003e35mm Overflow Extended - Provides an effective discharge route for excess water, ensuring system safety and WRAS compliance\u003c\/li\u003e\n\n\t\u003cli\u003e1 1\/4\" BSP Female Tank Connector Type 2 - Robust, watertight outlet connection for easy plumbing integration.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eIf the Encapsulated Baseboard, Support frame or any other bespoke options are required, please see the following product - \u003cstrong\u003e\u003ca href=\"https:\/\/www.tanks-direct.co.uk\/187-litre-grp-water-tank-insulated\/p4364\"\u003e\u003cspan style=\"color:#e74c3c\"\u003ePW187-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW187 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 750 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 690 x 690 x 759 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes my water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703944917317,"sku":"PW187-1-22\/35","price":580.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/49133_26335.jpg?v=1767800498"},{"product_id":"2000-litre-divided-grp-water-tank-insulated","title":"2000 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e2000 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2000 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2000 x 1000 x 1000mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2180 x 1180 x 1093mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703945015621,"sku":"PW2000-1-DIV","price":1932.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48319_25274.jpg?v=1767875663"},{"product_id":"2001-litre-divided-grp-water-tank-insulated","title":"2001 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e2001 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2001 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 2000mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1160 x 1160 x 2093mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703945081157,"sku":"PW2001-1-DIV","price":2671.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48320_25275.jpg?v=1767875662"},{"product_id":"2001-litre-two-piece-divided-grp-water-tank-insulated","title":"2001 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e2001 Litre Two Piece Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2001 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 2000mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1160 x 1160 x 2093mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703945179461,"sku":"PW2001-2-DIV","price":3272.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48389_25379.jpg?v=1767875662"},{"product_id":"2250-litre-divided-grp-water-tank-insulated","title":"2250 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e2250 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2250 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 1000 x 1500mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1702 x 1202 x 1593mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703945212229,"sku":"PW2250-1-DIV","price":2107.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48321_25278.jpg?v=1767875663"},{"product_id":"2250-litre-two-piece-divided-grp-water-tank-insulated","title":"2250 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e2250 Litre Two Piece Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2250 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 1000 x 1500mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1702 x 1202 x 1593mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703945310533,"sku":"PW2250-2-DIV","price":2704.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48391_25381.jpg?v=1767875663"},{"product_id":"225-litre-grp-water-tank-insulated-bundle","title":"225 Litre GRP Water Tank, Insulated - Bundle","description":"\u003ch2\u003e225 Litre GRP Water Tanks - Insulated (25 mm) Full WRAS approval - Bundle\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003c\/p\u003e\n\n\u003cp\u003eThis all-in-one bundle provides everything you need for a straightforward setup of your insulated GRP Water tank, ensuring a secure, and ready-to-use installation. Each component has been selected for reliability and compatibility with UK domestic and commercial water storage systems.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003ch3\u003eBundle Includes:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e225 Litre One Piece GRP Insulated (25mm as standard) Water Tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Lid vent - Prevents vacuum formation and allows safe air exchange within the tank\u003c\/li\u003e\n\n\t\u003cli\u003e22mm Equilibrium Float Valve - Maintains accurate water levels and prevents overflow by automatically controlling inflow\u003c\/li\u003e\n\n\t\u003cli\u003e35mm Overflow Extended - Provides an effective discharge route for excess water, ensuring system safety and WRAS compliance\u003c\/li\u003e\n\n\t\u003cli\u003e1 1\/4\" BSP Female Tank Connector Type 2 - Robust, watertight outlet connection for easy plumbing integration.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eIf the Encapsulated Baseboard, Support frame or any other bespoke options are required, please see the following product - \u003cstrong\u003e\u003ca href=\"https:\/\/www.tanks-direct.co.uk\/225-litre-grp-water-tank-insulated\/p4380\"\u003e\u003cspan style=\"color:#e74c3c\"\u003ePW225-1\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW225 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e 610 x 610 x 610 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e 805 x 805 x 649 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1 to 3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703945441605,"sku":"PW225-1-22\/35","price":585.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/49135_26338.jpg?v=1767800522"},{"product_id":"2272-litre-divided-grp-water-tank-insulated","title":"2272 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e2272 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2272 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1828 x 1220 x 1016mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2020 x 1410 x 1109mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703945670981,"sku":"PW2272-1-DIV","price":2067.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48322_25279.jpg?v=1767875663"},{"product_id":"2272-litre-two-piece-divided-grp-water-tank-insulated","title":"2272 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e2272 Litre Two Piece Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2272 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1828 x 1220 x 1016mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2020 x 1410 x 1109mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703945769285,"sku":"PW2272-2-DIV","price":2642.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48392_25383.jpg?v=1767875663"},{"product_id":"2272-litre-grp-water-tank","title":"2272 Litre GRP Water Tank","description":"\u003ch2\u003e2272 Litre GRP Water Tank\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost) Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2272 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1828 x 1220 x 1016 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2020 x 1410 x 1109 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your Water Tanks need a Clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703945867589,"sku":"PW2272-UN","price":1523.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4405_25554.jpg?v=1767800548"},{"product_id":"2501-litre-divided-grp-water-tank-insulated","title":"2501 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e2501 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2501 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2000 x 1000 x 1250mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2180 x 1000 x 1343mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703945998661,"sku":"PW2501-1-DIV","price":2423.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48324_25284.jpg?v=1767875663"},{"product_id":"2501-litre-two-piece-divided-grp-water-tank-insulated","title":"2501 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e2501 Litre Two Piece Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2501 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2000 x 1000 x 1250mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2180 x 1000 x 1343mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703946064197,"sku":"PW2501-2-DIV","price":3132.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48393_25385.jpg?v=1767875664"},{"product_id":"2726-litre-divided-grp-water-tank-insulated","title":"2726 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e2726 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2726 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1828 x 1220 x 1220mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2020 x 1410 x 1313mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703946260805,"sku":"PW2726-1-DIV","price":2296.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48323_25282.jpg?v=1767875664"},{"product_id":"2726-litre-two-piece-divided-grp-water-tank-insulated","title":"2726 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e2726 Litre Two Piece Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW2726 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1828 x 1220 x 1220mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2020 x 1410 x 1313mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703946359109,"sku":"PW2726-2-DIV","price":2921.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48394_25387.jpg?v=1767875664"},{"product_id":"3000-litre-divided-grp-water-tank-insulated","title":"3000 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e3000 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW3000 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 3000 x 1000 x 1000mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 3202x 1202 x 1093mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703946457413,"sku":"PW3000-1-DIV","price":2750.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48325_25287.jpg?v=1767875663"},{"product_id":"3000-litre-two-piece-divided-grp-water-tank-insulated","title":"3000 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e3000 Litre Two Piece Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW3000 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 3000 x 1000 x 1000mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 3202x 1202 x 1093mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703946555717,"sku":"PW3000-2-DIV","price":3550.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48395_25389.jpg?v=1767875664"},{"product_id":"3001-litre-divided-grp-water-tank-insulated","title":"3001 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e3001 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW3001 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2000 x 1000 x 1500mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2180 x 1180 x 1593mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703946621253,"sku":"PW3001-1-DIV","price":2689.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48326_25289.jpg?v=1767875664"},{"product_id":"305-litre-grp-water-tank","title":"305 Litre GRP Water Tank","description":"\u003ch2\u003e305 Litre GRP Water Tank\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW305 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 500 x 500 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (Lx W x H)\u003c\/td\u003e\n \u003ctd\u003e 690 x 690 x 1229 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703946817861,"sku":"PW305-UN","price":588.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4468_25526.jpg?v=1767800599"},{"product_id":"3185-litre-divided-grp-water-tank-insulated","title":"3185 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e3185 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW3185 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2440 x 1220 x 1070 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2610 x 1410 x 1163 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703946948933,"sku":"PW3185-1-DIV","price":2608.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48327_25290.jpg?v=1767875664"},{"product_id":"3185-litre-two-piece-divided-grp-water-tank-insulated","title":"3185 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e3185 Litre Two Piece Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW3185 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2440 x 1220 x 1070 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2610 x 1410 x 1163 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703947014469,"sku":"PW3185-2-DIV","price":3368.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48397_25393.jpg?v=1767875664"},{"product_id":"3636-litre-divided-grp-water-tank-insulated","title":"3636 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e3636 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW3636 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2440 x 1220 x 1070 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2610 x 1410 x 1163 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703947342149,"sku":"PW3636-1-DIV","price":2830.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48328_25293.jpg?v=1767875664"},{"product_id":"3750-litre-divided-grp-water-tank-insulated","title":"3750 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e3750 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW3750 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2500 x 1000 x 1000mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2694 x 1692 x 1093mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703947407685,"sku":"PW3750-1-DIV","price":3125.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48329_25294.jpg?v=1767875664"},{"product_id":"3750-litre-two-piece-divided-grp-water-tank-insulated","title":"3750 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e3750 Litre Two Piece Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW3750 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2500 x 1000 x 1000mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2694 x 1692 x 1093mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703947538757,"sku":"PW3750-2-DIV","price":4012.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48400_25397.jpg?v=1767875664"},{"product_id":"3750-litre-grp-water-tank","title":"3750 Litre GRP Water Tank","description":"\u003ch2\u003e3750 Litre GRP Water Tank\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW3750 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2500 x 1500 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2694 x 1694 x 1093 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003e\n\nWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703947571525,"sku":"PW3750-UN","price":2150.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4511_25561.jpg?v=1767800640"},{"product_id":"4000-litre-divided-grp-water-tank-insulated","title":"4000 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e4000 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW4000 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2000 x 2000 x 1000mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2192x 2192 x 1093mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703947735365,"sku":"PW4000-1-DIV","price":3287.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48331_25297.jpg?v=1767875667"},{"product_id":"4000-litre-two-piece-divided-grp-water-tank-insulated","title":"4000 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e4000 Litre Two Piece ivided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW4000 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2000 x 2000 x 1000mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2192x 2192 x 1093mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703947833669,"sku":"PW4000-2-DIV","price":4176.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48401_25399.jpg?v=1767875665"},{"product_id":"4000-litre-grp-water-tank","title":"4000 Litre GRP Water Tank","description":"\u003ch2\u003e4000 Litre GRP Water Tank\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW4000 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 2000 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2192 x 2192 x 1093 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eEver thought about cleaning your water tank?\u003c\/h3\u003e\n\u003cp\u003e\n\nWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703947997509,"sku":"PW4000-UN","price":2188.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4522_25562.jpg?v=1767800645"},{"product_id":"4001-litre-divided-grp-water-tank-insulated","title":"4001 Litre Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e4001 Litre Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW4001 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2000 x 1000 x 2000mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2180 x 1180 x 2093mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703948095813,"sku":"PW4001-1-DIV","price":3865.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48332_25298.jpg?v=1767875665"},{"product_id":"4001-litre-two-piece-divided-grp-water-tank-insulated","title":"4001 Litre Two Piece Divided GRP Water Tank, Insulated","description":"\u003ch2\u003e4001 Litre Two Piece Divided GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, A divided tank is to ensure water is always availible even whilst servicing the tank whilst using the highest quality GRP materials, this ensures a long service life with minimal maintenance requirements.\u003c\/p\u003e\n\n\u003cp\u003eFully WRAS approvedm, and grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note: Nominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3\u003ePW4001 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2000 x 1000 x 2000mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 2180 x 1180 x 2093mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand (1000 mm clearance to underside)\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle. If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703948128581,"sku":"PW4001-2-DIV","price":4005.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48402_25401.jpg?v=1767875666"},{"product_id":"4001-litre-grp-water-tank","title":"4001 Litre GRP Water Tank","description":"\u003ch2\u003e4001 Litre GRP Water Tank\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW4001 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 1000 x 2000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2202 x 1202 x 2095 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703948292421,"sku":"PW4001-UN","price":2778.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/42205_25563.jpg?v=1767800650"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/collections\/circle-item-c1437_-1-30e3a61d.jpg?v=1783591327","url":"https:\/\/tanks-direct.co.uk\/collections\/grp-break-tanks.oembed?page=15","provider":"Tanks Direct","version":"1.0","type":"link"}