{"title":"Fire Fighting Water Tanks","description":"","products":[{"product_id":"1000-litre-type-ab-air-gap-grp-fire-water-tank-insulated-cat-5","title":"1000 Litre Type AB Air Gap GRP Fire Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1000 Litre Type AB Air Gap GRP Fire Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval.\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003e\n\nOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003e\n\nAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional steel water tank support stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e\n\n\t\n\n\t\u003cp style=\"text-align: left;\"\u003ePW1000 One piece AB Specifications\u003c\/p\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1000\u003c\/td\u003e\n\n \u003ctd\u003e 1160 x 1160 x 1403\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1000\u003c\/td\u003e\n\n \u003ctd\u003e 1160 x 1160 x 1433\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703795855685,"sku":"PW1000-1-AB.FT.INS","price":1265.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926539350341,"sku":"PW1000-1-AB.FT","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47569_24369.jpg?v=1767875693"},{"product_id":"1050-litre-type-ab-air-gap-grp-fire-water-tank-insulated-cat-5","title":"1050 Litre Type AB Air Gap GRP Fire Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1050 Litre Type AB Air Gap GRP Fire Water Storage Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003e\nOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003e\nAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\n\u003cp\u003eNominal capacity shown\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e\n\n\t\n\n\t\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"font-size:16px\"\u003ePW1050 One piece AB Specifications\u003c\/span\u003e\u003c\/p\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1050 x 500 x 1400\u003c\/td\u003e\n\n \u003ctd\u003e 1665 x 665 x 1787\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1050 x 500 x 1400\u003c\/td\u003e\n\n \u003ctd\u003e 1665 x 665 x 1817\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703796412741,"sku":"PW1050-1-AB.FT.INS","price":1852.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926542496069,"sku":"PW1050-1-AB.FT","price":1610.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47570_24372.jpg?v=1767875695"},{"product_id":"1050-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"1050 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e1050 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003e\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\nAft the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These break tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp\u003e\n\nOptional steel water tank support Stand\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1050-1-AB.FT Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1050 x 500 x 1400\u003c\/td\u003e\n\n \u003ctd\u003e 1665 x 665 x 1787\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1050 x 500 x 1400\u003c\/td\u003e\n\n \u003ctd\u003e 1665 x 665 x 1817\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1 to 3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703796543813,"sku":"PW1050-2-AB.FT.INS","price":2374.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926542463301,"sku":"PW1050-2-AB.FT","price":2064.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47631_24589.jpg?v=1767875695"},{"product_id":"1364-litre-type-ab-air-gap-grp-fire-water-storage-tank-insulated-cat-5","title":"1364 Litre Type AB Air Gap GRP Fire Water Storage Tank, Insulated, Cat 5","description":"\u003ch2\u003e1364 Litre Type AB Air Gap GRP Fire Water Storage Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1470 x 1192 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e\n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1364 One piece AB Fire Water Tank Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1370 x 1092 x 915\u003c\/td\u003e\n\n \u003ctd\u003e 1570 x 1290 x 1318\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1370 x 1092 x 915\u003c\/td\u003e\n\n \u003ctd\u003e 1570 x 1290 x 1348\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703797985605,"sku":"PW1364-1-AB.FT.INS","price":1420.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926553080133,"sku":"PW1364-1-AB.FT","price":1234.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47574_24384.jpg?v=1767875696"},{"product_id":"2500-litre-type-ab-air-gap-grp-fire-water-tank-insulated-cat-5","title":"2500 Litre Type AB Air Gap GRP Fire Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e2500 Litre Type AB Air Gap GRP Fire Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003e\nOnly materials of the highest quality are used along with highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2501 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 2000 x 1000 x 1250\u003c\/td\u003e\n\n \u003ctd\u003e 2180 x 1180 x 1626\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 2000 x 1000 x 1250\u003c\/td\u003e\n\n \u003ctd\u003e 2180 x 1180 x 1656\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e2100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1 to 3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703800770885,"sku":"PW2501-1-AB.FT.INS","price":2417.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926625726789,"sku":"PW2501-1-AB.FT","price":2102.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47584_24429.jpg?v=1767800556"},{"product_id":"250-litre-type-ab-air-gap-grp-fire-water-tank-insulated-cat-5","title":"250 Litre Type AB Air Gap GRP Fire Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e250 Litre Type AB Air Gap GRP Fire Water Storage Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003e\n\nOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003e\n\nAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003ePW250 One Piece AB Fire Water Tank Specifications\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 500 x 500\u003c\/td\u003e\n\n \u003ctd\u003e 1160 x 660 x 827\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 500 x 500\u003c\/td\u003e\n\n \u003ctd\u003e 1160 x 660 x 857\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003cp\u003e\nAnnual Disinfection Information and Options\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703800934725,"sku":"PW250-1-AB.FT.INS","price":654.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926622679365,"sku":"PW250-1-AB.FT","price":567.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47552_24321.jpg?v=1767800551"},{"product_id":"2726-litre-type-ab-air-gap-grp-fire-suppression-water-tank-two-piece-insulated-cat-5","title":"2726 Litre Type AB Air Gap GRP Fire Suppression Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2 style=\"margin: 0px; text-indent: 0px;\"\u003e\n\u003c!--StartFragment--\u003e2726 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003c\/p\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1930 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2726-2-AB.FT Fire Water Tank Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1828 x 1220 x 1220\u003c\/td\u003e\n\n \u003ctd\u003e 2020 x 1410 x 1623\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1828 x 1220 x 1220\u003c\/td\u003e\n\n \u003ctd\u003e 2020 x 1410 x 1653\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703801622853,"sku":"PW2726-2-AB.FT.INS","price":2876.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926627955013,"sku":"PW2726-2-AB.FT","price":2465.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47696_24630.jpg?v=1767800575"},{"product_id":"4500-litre-type-ab-air-gap-grp-fire-water-tank-insulated-cat-5","title":"4500 Litre Type AB Air Gap GRP Fire Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e4500 Litre Type AB Air Gap GRP Fire Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003e\nOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW4500 One Piece AB Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 2500 x 1500 x 1200\u003c\/td\u003e\n\n \u003ctd\u003e 2694 x 1694 x 1603\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 2500 x 1500 x 1200\u003c\/td\u003e\n\n \u003ctd\u003e 2694 x 1694 x 1633\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703804801349,"sku":"PW4500-1-AB.FT.INS","price":3296.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926649680197,"sku":"PW4500-1-AB.FT","price":2866.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47602_24458.jpg?v=1767875702"},{"product_id":"570-litres-type-ab-air-gap-grp-fire-water-tank-one-piece-insulated-cat-5","title":"570 Litres Type AB Air Gap GRP Fire Water Tank - One Piece Insulated, Cat 5","description":"\u003ch2\u003e570 Litres Type AB Air Gap GRP Fire Water Tank - One Piece Insulated, Cat 5 Full WRAS approval.\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003e\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. (Made to order, non-returnable). Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These break tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003ePW570 One Piece AB Specifications\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 990 x 760 x 760\u003c\/td\u003e\n\n \u003ctd\u003e 1150 x 925 x 1109\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 990 x 760 x 760\u003c\/td\u003e\n\n \u003ctd\u003e 1150 x 925 x 1139\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703806210373,"sku":"PW570-1-AB.FT.INS","price":849.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926662426949,"sku":"PW570-1-AB.FT","price":737.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47561_24348.jpg?v=1767875704"},{"product_id":"909-litre-type-ab-air-gap-grp-fire-water-tank-insulated-cat-5","title":"909 Litre Type AB Air Gap GRP Fire Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e909 Litre Type AB Air Gap GRP Fire Water Storage Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank, to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e\n\n\t\n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW909 One piece AB Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1168 x 890 x 890\u003c\/td\u003e\n\n \u003ctd\u003e 1330 x 1050 x 1239\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1168 x 890 x 890\u003c\/td\u003e\n\n \u003ctd\u003e 1330 x 1050 x 1269\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703810142533,"sku":"PW909-1-AB.FT.INS","price":1080.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926683529541,"sku":"PW909-1-AB.FT","price":939.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47568_24397.jpg?v=1767875706"},{"product_id":"1000-litre-grp-pump-enclosure-with-built-in-fire-suppression-water-tank-cat-5-ab-air-gap","title":"1000 Litre GRP Pump Enclosure with built in Fire Suppression Water Tank, CAT 5 AB air gap","description":"\u003ch2\u003eGRP Above Ground Fire Combination Unit 1000 Litre, CAT 5 AB air gap\u003c\/h2\u003e\n\n\u003cp\u003e\n\nThe unit is designed as a single piece item with an internal dividing wall at full height. One internal section being the wet compartment for the stored water, which is accessed via a lid mounted lockable man way. Beyond the internal dividing wall is the dry side where the booster set is to be positioned. The internal dividing wall has the inlet and outlet connection within it, the overflow, warning pipe and screened spill over weir terminate through the wet side wall to the outside and do not therefore normally require any additional pipework. The dry side is accessed by a large 1600 x 1600mm hinged and lockable door, which is fitted with louvered vents to ensure adequate ventilation.\u003cbr\u003e\nIf chosen with the Foundation Skid, the whole unit is mounted and fixed to a fully welded galvanised steel skid, which allows offloading and movement on site by fork lift struck. The principle is to provide the unit to the booster set manufacturer, where the booster and associated electrical equipment can be fitted. The completed unit can then be delivered to site where once positioned it requires the simple connection of the mains pipework, outlet pipework to the services, and electrical supply, making it a \"plug and play' unit requiring minimal on-site installation.\u003c\/p\u003e\n\n\u003ch3\u003e\nAll units are fitted with the following:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e1 No 50mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e1 No single 1600 x 1600mm door to the end face of the pump compartment\u003c\/li\u003e\n\n\t\u003cli\u003e1 No lockable access man way fitted to the roof of the wet compartment.\u003c\/li\u003e\n\n\t\u003cli\u003e1 No EPDM mat to the floor of the pump compartment\u003c\/li\u003e\n\n\t\u003cli\u003eA fully encapsulated ply base.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eCU1.1000AB.FT data\u003c\/h3\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e\n\n \u003cp\u003eNominal Capacity\u003c\/p\u003e\n\n \u003c\/td\u003e\n\n \u003ctd\u003e\n\n \u003cp\u003e1620 Litres\u003c\/p\u003e\n\n \u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e\n\n \u003cp\u003eActual Capacity Approx.\u003c\/p\u003e\n\n \u003c\/td\u003e\n\n \u003ctd\u003e\n\n \u003cp\u003e1000 Litres\u003c\/p\u003e\n\n \u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e\n\n \u003cp\u003eOverall Dimensions\u003c\/p\u003e\n\n \u003c\/td\u003e\n\n \u003ctd\u003e\n\n \u003cp\u003e2200 x 2000 x 2250mm high\u003c\/p\u003e\n\n \u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e\n\n \u003cp\u003eWet Compartment\u003c\/p\u003e\n\n \u003c\/td\u003e\n\n \u003ctd\u003e\n\n \u003cp\u003e500 x 1800 x 1800mm \u003c\/p\u003e\n\n \u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e\n\n \u003cp\u003ePump Compartment\u003c\/p\u003e\n\n \u003c\/td\u003e\n\n \u003ctd\u003e\n\n \u003cp\u003e1500 x 1800 1800mm\u003c\/p\u003e\n\n \u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003cp\u003e\n\n*Units do not include electrical components, wiring, pump sets, control equipment, connections of any kind or internal pipework.\u003cbr\u003e\n\n*Units not fitted with a galvanised steel skid are suitable for positioning onto a structural pad only which should be flat, level and continuous and be +\/- 2mm over the surface area.\u003cbr\u003e\n\n*Units not fitted with a galvanised steel skid have an external height 200mm less than stated in the overall dimensions column of this document\u003c\/p\u003e\n\n\u003ch3\u003e\n\n**Cat 5 (AB and AG) supplied loose\u003cbr\u003e\nAG Airgap\u003c\/h3\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP22-AG-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e22mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e35mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP28-AG-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e28mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e42mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP35-AG-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e35mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e50mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP42-AG-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e42mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e67mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP50-AG-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e50mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e50mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e80mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003e\nAB Airgap\u003c\/h3\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP22-AB-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e22mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e35mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP28-AB-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e28mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e42mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP35-AB-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e35mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e50mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP42-AB-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e42mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e67mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP50-AB-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e50mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e80mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e**Pictures are for illustration purposes only\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703899828549,"sku":"CU1.1000AB.FT","price":9495.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/circle-item-c1548-1-26a6fa54.jpg?v=1768235772"},{"product_id":"2000-litre-grp-pump-enclosure-with-built-in-fire-suppression-water-tank-cat-5-ab-air-gap","title":"2000 Litre GRP Pump Enclosure with built in Fire Suppression Water Tank, CAT 5 AB air gap","description":"\u003ch2\u003eGRP Above Ground Fire Combination Unit 2100 Litre, CAT 5 AB air gap\u003c\/h2\u003e\n\n\u003cp\u003eThe unit is designed as a single piece item with an internal dividing wall at full height. One internal section being the wet compartment for the stored water, which is accessed via a lid mounted lockable man way. Beyond the internal dividing wall is the dry side where the booster set is to be positioned. The internal dividing wall has the inlet and outlet connection within it, the overflow, warning pipe and screened spill over weir terminate through the wet side wall to the outside and do not therefore normally require any additional pipework. The dry side is accessed by a large 1600 x 1600mm hinged and lockable door, which is fitted with louvered vents to ensure adequate ventilation.\u003cbr\u003e\nIf chosen with the Foundation Skid, the whole unit is mounted and fixed to a fully welded galvanised steel skid, which allows offloading and movement on site by fork lift struck. The principle is to provide the unit to the booster set manufacturer, where the booster and associated electrical equipment can be fitted. The completed unit can then be delivered to site where once positioned it requires the simple connection of the mains pipework, outlet pipework to the services, and electrical supply, making it a \"plug and play' unit requiring minimal on-site installation.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAll units are fitted with the following:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e1 No 50mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e1 No single 1600 x 1600mm door to the end face of the pump compartment\u003c\/li\u003e\n\n\t\u003cli\u003e1 No lockable access man way fitted to the roof of the wet compartment.\u003c\/li\u003e\n\n\t\u003cli\u003e1 No EPDM mat to the floor of the pump compartment\u003c\/li\u003e\n\n\t\u003cli\u003eA fully encapsulated ply base.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e*Units do not include electrical components, wiring, pump sets, control equipment, connections of any kind or internal pipework.\u003cbr\u003e\n\n*Units not fitted with a galvanised steel skid are suitable for positioning onto a structural pad only which should be flat, level and continuous and be +\/- 2mm over the surface area.\u003cbr\u003e\n\n*Units not fitted with a galvanised steel skid have an external height 200mm less than stated in the overall dimensions column of this document\u003c\/p\u003e\n\n\u003ch3\u003eCU2.2000AB Data\u003c\/h3\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eNominal Capacity\u003c\/td\u003e\n\n \u003ctd\u003e3240 Litres\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eActual Capacity Approx\u003c\/td\u003e\n\n \u003ctd\u003e2000 Litres\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eOverall Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e2700 x 2000 x 2250 high\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eWet Compartment\u003c\/td\u003e\n\n \u003ctd\u003e1000 x 1800 x 1800mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003ePump Compartment\u003c\/td\u003e\n\n \u003ctd\u003e1500 x 1800 x 1800mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003e\n**Cat 5 (AB and AG) supplied loose\u003c\/h3\u003e\n\n\u003ch3\u003e\nAG Airgap\u003c\/h3\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP22-AG-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e22mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e35mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP28-AG-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e28mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e42mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP35-AG-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e35mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e50mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP42-AG-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e42mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e67mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP50-AG-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e50mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e50mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e80mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003e\nAB Airgap\u003c\/h3\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP22-AB-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e22mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e35mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP28-AB-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e28mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e42mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP35-AB-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e35mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e50mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP42-AB-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e42mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e67mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP50-AB-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e50mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e80mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e**Pictures are for illustration purposes only\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703900287301,"sku":"CU2.2000AB.FT","price":9176.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48257_25218.jpg?v=1767875740"},{"product_id":"3000-litre-grp-pump-enclosure-with-built-in-fire-suppression-water-tank-cat-5-ab-air-gap","title":"3000 Litre GRP Pump Enclosure with built in Fire Suppression Water Tank, CAT 5 AB air gap","description":"\u003ch2\u003eGRP Above Ground Fire Combination Unit 3000 Litre, CAT 5 AB air gap\u003c\/h2\u003e\n\n\u003cp\u003eThe unit is designed as a single piece item with an internal dividing wall at full height. One internal section being the wet compartment for the stored water, which is accessed via a lid mounted lockable man way. Beyond the internal dividing wall is the dry side where the booster set is to be positioned. The internal dividing wall has the inlet and outlet connection within it, the overflow, warning pipe and screened spill over weir terminate through the wet side wall to the outside and do not therefore normally require any additional pipework. The dry side is accessed by a large 1600 x 1600mm hinged and lockable door, which is fitted with louvered vents to ensure adequate ventilation.\u003cbr\u003e\nIf chosen with the Foundation Skid, the whole unit is mounted and fixed to a fully welded galvanised steel skid, which allows offloading and movement on site by fork lift struck. The principle is to provide the unit to the booster set manufacturer, where the booster and associated electrical equipment can be fitted. The completed unit can then be delivered to site where once positioned it requires the simple connection of the mains pipework, outlet pipework to the services, and electrical supply, making it a \"plug and play' unit requiring minimal on-site installation.\u003c\/p\u003e\n\n\u003ch3\u003e\nAll units are fitted with the following:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e1 No 50mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e1 No single 1600 x 1600mm door to the end face of the pump compartment\u003c\/li\u003e\n\n\t\u003cli\u003e1 No lockable access man way fitted to the roof of the wet compartment.\u003c\/li\u003e\n\n\t\u003cli\u003e1 No EPDM mat to the floor of the pump compartment\u003c\/li\u003e\n\n\t\u003cli\u003eA fully encapsulated ply base.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e*Units do not include electrical components, wiring, pump sets, control equipment, connections of any kind or internal pipework.\u003cbr\u003e\n\n*Units not fitted with a galvanised steel skid are suitable for positioning onto a structural pad only which should be flat, level and continuous and be +\/- 2mm over the surface area.\u003cbr\u003e\n\n*Units not fitted with a galvanised steel skid have an external height 200mm less than stated in the overall dimensions column of this document\u003c\/p\u003e\n\n\u003ch3\u003eCU2.3000AB Data\u003c\/h3\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eNominal Capacity\u003c\/td\u003e\n\n \u003ctd\u003e4200 Litres\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eActual Capacity Approx.\u003c\/td\u003e\n\n \u003ctd\u003e3000 Litres\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eOverall Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e2700 x 2000 x 2250mm high\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eWet Compartment\u003c\/td\u003e\n\n \u003ctd\u003e1300 x 1800 x 1800mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003ePump Compartment\u003c\/td\u003e\n\n \u003ctd\u003e1200 x 1800 x 1800mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003e\n\n**Cat 5 (AB and AG) supplied loose\u003c\/h3\u003e\n\n\u003ch3\u003e\nAG Airgap\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eIP22-AG-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e22mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e35mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP28-AG-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e28mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e42mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP35-AG-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e35mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e50mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP42-AG-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e42mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e67mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP50-AG-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e50mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e50mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e80mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003e\nAB Airgap\u003c\/h3\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP22-AB-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e22mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e35mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP28-AB-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e28mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e42mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP35-AB-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e35mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e50mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP42-AB-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e42mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e67mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003eIP50-AB-SL\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e50mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e80mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e**Pictures are for illustration purposes only\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703900647749,"sku":"CU2.3000AB.FT","price":9283.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48258_25219.jpg?v=1767875739"},{"product_id":"4000-litre-grp-pump-enclosure-with-built-in-fire-suppression-water-tank-cat-5-ab-air-gap","title":"4000 Litre GRP Pump Enclosure with built in Fire Suppression Water Tank, CAT 5 AB air gap","description":"\u003ch2\u003eGRP Above Ground Fire Combination Unit 4000 Litre, CAT 5 AB air gap\u003c\/h2\u003e\n\n\u003cp\u003e\n\nThe unit is designed as a single piece item with an internal dividing wall at full height. One internal section being the wet compartment for the stored water, which is accessed via a lid mounted lockable man way. Beyond the internal dividing wall is the dry side where the booster set is to be positioned. The internal dividing wall has the inlet and outlet connection within it, the overflow, warning pipe and screened spill over weir terminate through the wet side wall to the outside and do not therefore normally require any additional pipework. The dry side is accessed by a large 1600 x 1600mm hinged and lockable door, which is fitted with louvred vents to ensure adequate ventilation.\u003cbr\u003e\nIf chosen with the Foundation Skid, the whole unit is mounted and fixed to a fully welded galvanised steel skid, which allows offloading and movement on site by fork lift struck. The principle is to provide the unit to the booster set manufacturer, where the booster and associated electrical equipment can be fitted. The completed unit can then be delivered to site where once positioned it requires the simple connection of the mains pipework, outlet pipework to the services, and electrical supply, making it a \"plug and play' unit requiring minimal onsite installation.\u003c\/p\u003e\n\n\u003ch3\u003e\nAll units are fitted with the following:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e1 No 50mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e1 No single 1600 x 1600mm door to the end face of the pump compartment\u003c\/li\u003e\n\n\t\u003cli\u003e1 No lockable access manway fitted to the roof of the wet compartment.\u003c\/li\u003e\n\n\t\u003cli\u003e1 No EPDM mat to the floor of the pump compartment\u003c\/li\u003e\n\n\t\u003cli\u003eA fully encapsulated ply base.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e*Units do not include electrical components, wiring, pump sets, control equipment, connections of any kind or internal pipework.\u003cbr\u003e\n\n**Units not fitted with a galvanised steel skid are suitable for positioning onto a structural pad only which should be flat, level and continuous and be +\/- 2mm over the surface area.\u003cbr\u003e\n\n***Units not fitted with a galvanised steel skid have an external height 200mm less than stated in the overall dimensions column of this document\u003cbr\u003e\n\n\u003cem\u003e**Cat 5 (AB and AG) supplied loose\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003eCU3.4000AB.FT Data\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eNominal Capacity\u003c\/td\u003e\n\n \u003ctd\u003e5500 Litres\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eActual Capacity Approx.\u003c\/td\u003e\n\n \u003ctd\u003e4000 Litres\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eOverall Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e3600 x 2000 x 2250mm high\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eWet Compartment\u003c\/td\u003e\n\n \u003ctd\u003e1700 x 1800 x 1800mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003ePump Compartment\u003c\/td\u003e\n\n \u003ctd\u003e1700 x 1800 x 1800mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003e\nAG Airgap\u003c\/h3\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP22-AG-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e22mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e35mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP28-AG-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e28mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e42mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP35-AG-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e35mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e50mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP42-AG-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e42mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e67mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP50-AG-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e50mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e50mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e80mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eAB Airgap\u003c\/h3\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP22-AB-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e22mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e35mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003e\u003cspan style=\"font-size:14px\"\u003eIP28-AB-SL\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e28mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e42mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP35-AB-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e35mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e50mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003e\u003cspan style=\"font-size:14px\"\u003eIP42-AB-SL\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e42mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e67mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003e\u003cspan style=\"font-size:14px\"\u003eIP50-AB-SL\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e50mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e80mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e**Pictures are for illustration purposes only\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703901466949,"sku":"CU3.4000AB.FT","price":12010.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48280_25241.jpg?v=1767875740"},{"product_id":"5000-litre-grp-pump-enclosure-with-built-in-fire-suppression-water-tank-cat-5-ab-air-gap","title":"5000 Litre GRP Pump Enclosure with built in Fire Suppression Water Tank, CAT 5 AB air gap","description":"\u003ch2\u003eGRP Above Ground Fire Combination Unit 5000 Litre, CAT 5 AB air gap\u003c\/h2\u003e\n\n\u003cp\u003e\n\nThe unit is designed as a single piece item with an internal dividing wall at full height. One internal section being the wet compartment for the stored water, which is accessed via a lid mounted lockable man way. Beyond the internal dividing wall is the dry side where the booster set is to be positioned. The internal dividing wall has the inlet and outlet connection within it, the overflow, warning pipe and screened spill over weir terminate through the wet side wall to the outside and do not therefore normally require any additional pipework. The dry side is accessed by a large 1600 x 1600mm hinged and lockable door, which is fitted with louvred vents to ensure adequate ventilation.\u003cbr\u003e\nIf chosen with the Foundation Skid, the whole unit is mounted and fixed to a fully welded galvanised steel skid, which allows offloading and movement on site by fork lift struck. The principle is to provide the unit to the booster set manufacturer, where the booster and associated electrical equipment can be fitted. The completed unit can then be delivered to site where once positioned it requires the simple connection of the mains pipework, outlet pipework to the services, and electrical supply, making it a 'plug and play' unit requiring minimal onsite installation.\u003c\/p\u003e\n\n\u003ch3\u003e\nAll units are fitted with the following:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e1 No 50mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e1 No single 1600 x 1600mm door to the end face of the pump compartment\u003c\/li\u003e\n\n\t\u003cli\u003e1 No lockable access man way fitted to the roof of the wet compartment.\u003c\/li\u003e\n\n\t\u003cli\u003e1 No EPDM mat to the floor of the pump compartment\u003c\/li\u003e\n\n\t\u003cli\u003eA fully encapsulated ply base.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e*Units do not include electrical components, wiring, pump sets, control equipment, connections of any kind or internal pipework.\u003cbr\u003e\n\n**Units not fitted with a galvanised steel skid are suitable for positioning onto a structural pad only which should be flat, level and continuous and be +\/- 2mm over the surface area.\u003cbr\u003e\n\n***Units not fitted with a galvanised steel skid have an external height 200mm less than stated in the overall dimensions column of this document\u003cbr\u003e\n\n\u003cem\u003e**Cat 5 (AB and AG) supplied loose\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eCU3.5000AB Data\u003c\/h3\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eNominal Capacity\u003c\/td\u003e\n\n \u003ctd\u003e7100 Litres\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eActual Capacity Approx.\u003c\/td\u003e\n\n \u003ctd\u003e5000 Litres\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eOverall Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e3600 x 2000 x 2250mm high\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eWet Compartment\u003c\/td\u003e\n\n \u003ctd\u003e2200 x 1800 x 1800mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003ePump Compartment\u003c\/td\u003e\n\n \u003ctd\u003e1200 x 1800 x 1800mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003e\nAG Airgap\u003c\/h3\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP22-AG-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e22mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e35mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP28-AG-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e28mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e42mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP35-AG-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e35mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e50mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP42-AG-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e42mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e67mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP50-AG-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e50mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e50mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e80mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003e\nAB Airgap\u003c\/h3\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP22-AB-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e22mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e35mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP28-AB-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e28mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e42mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP35-AB-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e35mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e50mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP42-AB-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e42mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e67mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP50-AB-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e50mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e80mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e**Pictures are for illustration purposes only\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703901794629,"sku":"CU3.5000AB.FT","price":12342.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48281_25242.jpg?v=1767875740"},{"product_id":"7000-litre-grp-pump-enclosure-with-built-infire-suppression-water-tank-cat-5-ab-air-gap","title":"7000 Litre GRP Pump Enclosure with built inFire Suppression Water Tank, CAT 5 AB air gap","description":"\u003ch2\u003eGRP Above Ground Fire Combination Unit 7000 Litre, CAT 5 AB air gap\u003c\/h2\u003e\n\n\u003cp\u003eThe unit is designed as a single piece item with an internal dividing wall at full height. One internal section being the wet compartment for the stored water, which is accessed via a lid mounted lockable man way. Beyond the internal dividing wall is the dry side where the booster set is to be positioned. The internal dividing wall has the inlet and outlet connection within it, the overflow, warning pipe and screened spill over weir terminate through the wet side wall to the outside and do not therefore normally require any additional pipework. The dry side is accessed by a large 1600 x 1600mm hinged and lockable door, which is fitted with louvred vents to ensure adequate ventilation.\u003cbr\u003e\nIf chosen with the Foundation Skid, the whole unit is mounted and fixed to a fully welded galvanised steel skid, which allows offloading and movement on site by fork lift struck. The principle is to provide the unit to the booster set manufacturer, where the booster and associated electrical equipment can be fitted. The completed unit can then be delivered to site where once positioned it requires the simple connection of the mains pipework, outlet pipework to the services, and electrical supply, making it a 'plug and play' unit requiring minimal onsite installation.\u003c\/p\u003e\n\n\u003ch3\u003e\nAll units are fitted with the following:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e1 No 50mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e1 No single 1600 x 1600mm door to the end face of the pump compartment\u003c\/li\u003e\n\n\t\u003cli\u003e1 No lockable access man way fitted to the roof of the wet compartment.\u003c\/li\u003e\n\n\t\u003cli\u003e1 No EPDM mat to the floor of the pump compartment\u003c\/li\u003e\n\n\t\u003cli\u003eA fully encapsulated ply base.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e*Units do not include electrical components, wiring, pump sets, control equipment, connections of any kind or internal pipework.\u003cbr\u003e\n\n**Units not fitted with a galvanised steel skid are suitable for positioning onto a structural pad only which should be flat, level and continuous and be +\/- 2mm over the surface area.\u003cbr\u003e\n\n***Units not fitted with a galvanised steel skid have an external height 200mm less than stated in the overall dimensions column of this document\u003cbr\u003e\n\n\u003cstrong\u003e**Cat 5 (AB and AG) supplied loose\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCU4.7000AB.FT Data\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eNominal Capacity\u003c\/td\u003e\n\n \u003ctd\u003e10,044 Litres\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eActual Capacity Approx.\u003c\/td\u003e\n\n \u003ctd\u003e7000 Litres\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eOverall Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e4500 x 2000 x 2250mm high\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003eWet Compartment\u003c\/td\u003e\n\n \u003ctd\u003e3100 x 1800 x 1800mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003ePump Compartment\u003c\/td\u003e\n\n \u003ctd\u003e1200 x 1800 x 1800mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003e\nAG Airgap\u003c\/h3\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP22-AG-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e22mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e35mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP28-AG-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e28mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e42mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cstrong\u003e\u003cspan style=\"font-size:14px\"\u003eIP35-AG-SL\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e35mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e50mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP42-AG-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e42mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e42mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e67mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP50-AG-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e50mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e50mm equilibrium float valve\u003c\/li\u003e\n\n\t\u003cli\u003e80mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003e\nAB Airgap\u003c\/h3\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP22-AB-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e22mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e35mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP28-AB-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e28mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e42mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP35-AB-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e35mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e50mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP42-AB-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e42mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e67mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\n\n\u003cspan style=\"font-size:14px\"\u003e\u003cstrong\u003eIP50-AB-SL\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e22mm screened lid vent\u003c\/li\u003e\n\n\t\u003cli\u003e50mm equilibrium float valve c\/w drop arm and float\u003c\/li\u003e\n\n\t\u003cli\u003e80mm screened overflow\u003c\/li\u003e\n\n\t\u003cli\u003e22mm screened warning pipe\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e**Pictures are for illustration purposes only\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703902417221,"sku":"CU4.7000AB.FT","price":15015.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/48282_25243.jpg?v=1767875741"},{"product_id":"1000-litre-type-ab-air-gap-grp-fire-tank-two-piece-insulated-cat-5","title":"1000 Litre Type AB Air Gap GRP Fire Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e1000 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003e\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These break tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nOptional steel water tank support frame\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support frames suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1000-1-AB.FT Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1000\u003c\/td\u003e\n\n \u003ctd\u003e 1160 x 1160 x 1403\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1000\u003c\/td\u003e\n\n \u003ctd\u003e 1160 x 1160 x 1433\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926539252037,"sku":"PW1000-2-AB.FT","price":1576.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926539284805,"sku":"PW1000-2-AB.FT.INS","price":1790.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47630_24579.jpg?v=1769007200"},{"product_id":"1125-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"1125 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e1125 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003e\n\nManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1624 x 1015 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1125-1-AB.FT Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 500 x 1500\u003c\/td\u003e\n\n \u003ctd\u003e 1665 x 665 x 1887\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 500 x 1500\u003c\/td\u003e\n\n \u003ctd\u003e 1665 x 665 x 1917\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926545019205,"sku":"PW1125-2-AB.FT","price":2109.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926545051973,"sku":"PW1125-2-AB.FT.INS","price":2425.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47632_24590.jpg?v=1778768924"},{"product_id":"1125-litre-type-ab-air-gap-grp-fire-water-tank-insulated-cat-5","title":"1125 Litre Type AB Air Gap GRP Fire Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1125 Litre Type AB Air Gap GRPFire Safety Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. \u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1624 x 1015 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e\n\n\t\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"font-size:16px\"\u003ePW1125 One piece AB Specifications\u003c\/span\u003e\u003c\/p\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 500 x 1500\u003c\/td\u003e\n\n \u003ctd\u003e 1665 x 665 x 1887\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 500 x 1500\u003c\/td\u003e\n\n \u003ctd\u003e 1665 x 665 x 1917\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926545084741,"sku":"PW1125-1-AB.FT","price":1677.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926545117509,"sku":"PW1125-1-AB.FT.INS","price":1920.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47571_24375.jpg?v=1778768924"},{"product_id":"1135-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"1135 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e1135 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1624 x 1015 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1135-1-AB.FT Fire Water Tank Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1524 x 915 x 812\u003c\/td\u003e\n\n \u003ctd\u003e 1680 x 1080 x 1215\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1524 x 915 x 812\u003c\/td\u003e\n\n \u003ctd\u003e 1680 x 1080 x 1245\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926546460997,"sku":"PW1135-2-AB.FT","price":1679.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926546493765,"sku":"PW1135-2-AB.FT.INS","price":1931.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47633_24593.jpg?v=1769007231"},{"product_id":"1135-litre-type-ab-air-gap-grp-fire-water-tank-insulated-cat-5","title":"1135 Litre Type AB Air Gap GRP Fire Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1135 Litre Type AB Air Gap GRP Fire Suppression Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. \u003cbr\u003e\n\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/p\u003e\n\n\u003cp\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/p\u003e\n\n\u003cp\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1624 x 1015 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cspan style=\"font-size:16px\"\u003ePW1135-1-AB.FT Fire Water Tank Specifications\u003c\/span\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1524 x 915 x 812\u003c\/td\u003e\n\n \u003ctd\u003e 1680 x 1080 x 1215\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1524 x 915 x 812\u003c\/td\u003e\n\n \u003ctd\u003e 1680 x 1080 x 1245\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003cp\u003e\nAnnual Disinfection Information and Options\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926546526533,"sku":"PW1135-1-AB.FT","price":1166.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926546559301,"sku":"PW1135-1-AB.FT.INS","price":1340.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47572_24378.jpg?v=1769007226"},{"product_id":"1220-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"1220 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e1220 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003e\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1220-2-AB.FT Fire Water Tank Data Sheet\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1220\u003c\/td\u003e\n\n \u003ctd\u003e 1165 x 1165 x 1623\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1220\u003c\/td\u003e\n\n \u003ctd\u003e 1165 x 1165 x 1653\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926548001093,"sku":"PW1220-2-AB.FT","price":1802.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926548033861,"sku":"PW1220-2-AB.FT.INS","price":2072.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47681_24596.jpg?v=1769007241"},{"product_id":"1220-litre-type-ab-air-gap-grp-fire-water-tank-insulated-cat-5","title":"1220 Litre Type AB Air Gap GRP Fire Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1220 Litre Type AB Air Gap GRP Fire Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003e\nAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e\n\n\t\n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1220 One piece AB Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1220\u003c\/td\u003e\n\n \u003ctd\u003e 1165 x 1165 x 1623\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1220\u003c\/td\u003e\n\n \u003ctd\u003e 1165 x 1165 x 1653\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926548721989,"sku":"PW1220-1-AB.FT","price":1235.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926548754757,"sku":"PW1220-1-AB.FT.INS","price":1420.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47573_24381.jpg?v=1769007235"},{"product_id":"125-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"125 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e125 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003c\/p\u003e\n\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. (Made to order, non-returnable)\u003c\/p\u003e\n\n\u003cp\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW125-1-AB Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 500\u003c\/td\u003e\n\n \u003ctd\u003e 675 x 675 x 828\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 500\u003c\/td\u003e\n\n \u003ctd\u003e 675 x 675 x 858\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926549344581,"sku":"PW125-2-AB.FT","price":799.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926549377349,"sku":"PW125-2-AB.FT.INS","price":819.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47609_24483.jpg?v=1769007250"},{"product_id":"125-litre-type-ab-air-gap-grp-fire-water-tank-insulated","title":"125 Litre Type AB Air Gap GRP Fire Water Tank, Insulated","description":"\u003ch2\u003e125 Litre GRP Water Fire Tank - Insulated (25 mm) Full WRAS approval.\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003e\nOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003e\nAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\n\u003cp\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. View more information on our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/water-tanks\/grp-tanks\/two-piece-insulated-grp-break-tank\/c927\"\u003etwo piece GRP tank range\u003c\/a\u003e here.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e\n\n\t\u003cp style=\"text-align: left;\"\u003e \u003c\/p\u003e\n\n\t\u003cp\u003ePW125 One piece AB Specifications\u003c\/p\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 500\u003c\/td\u003e\n\n \u003ctd\u003e 675 x 675 x 828\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 500\u003c\/td\u003e\n\n \u003ctd\u003e 675 x 675 x 858\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926549410117,"sku":"PW125-1-AB.FT","price":445.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926549442885,"sku":"PW125-1-AB.FT.INS","price":512.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47548_24306.jpg?v=1778768926"},{"product_id":"1364-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"1364 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e1364 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003e\n\nManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1364-2-AB.FT Fire Water Tank Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1370 x 1092 x 915\u003c\/td\u003e\n\n \u003ctd\u003e 1570 x 1290 x 1318\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1370 x 1092 x 915\u003c\/td\u003e\n\n \u003ctd\u003e 1570 x 1290 x 1348\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1470 x 1192 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926553112901,"sku":"PW1364-2-AB.FT","price":1767.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926553145669,"sku":"PW1364-2-AB.FT.INS","price":2035.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47682_24599.jpg?v=1769007259"},{"product_id":"1500-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"1500 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e1500 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\n\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1600 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1500-2-AB.FT Fire Water Tank Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 1000 x 1000\u003c\/td\u003e\n\n \u003ctd\u003e 1702 x 1202 x 1403\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 1000 x 1000\u003c\/td\u003e\n\n \u003ctd\u003e 1702 x 1202 x 1433\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926558159173,"sku":"PW1500-2-AB.FT","price":1877.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926558191941,"sku":"PW1500-2-AB.FT.INS","price":2159.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47683_24604.jpg?v=1769007268"},{"product_id":"1501-litre-type-ab-air-gap-grp-fire-water-tank-insulated-cat-5","title":"1501 Litre Type AB Air Gap GRP Fire Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1501 Litre Type AB Air Gap GRP Fire Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm.\u003c\/p\u003e\n\n\u003cp\u003eA float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra\u003c\/p\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process colling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003ePW1501-1-AB.FT Fire Water Tank Specifications\u003c\/h3\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1500\u003c\/td\u003e\n\n \u003ctd\u003e 1160 x 1160 x 1903\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 1500\u003c\/td\u003e\n\n \u003ctd\u003e 1160 x 1160 x 1933\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926559764805,"sku":"PW1501-1-AB.FT","price":1605.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926559797573,"sku":"PW1501-1-AB.FT.INS","price":1845.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47577_24391.jpg?v=1769007274"},{"product_id":"1590-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"1590 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e1590 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003e\n\nManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003e\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1624 x 1243 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1590-2-AB.FT Fire Water Tank Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1524 x 1143 x 915\u003c\/td\u003e\n\n \u003ctd\u003e 1700 x 1310 x 1318\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1524 x 1143 x 915\u003c\/td\u003e\n\n \u003ctd\u003e 1700 x 1310 x 1348\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926560223557,"sku":"PW1590-2-AB.FT","price":1912.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926560256325,"sku":"PW1590-2-AB.FT.INS","price":2198.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47685_24609.jpg?v=1769007283"},{"product_id":"1590-litre-type-ab-air-gap-grp-fire-water-tank-insulated-cat-5","title":"1590 Litre Type AB Air Gap GRP Fire Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1590 Litre Type AB Air Gap GRP Fire Water Storage Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1624 x 1243 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e\n\n\t\u003cp style=\"text-align: left;\"\u003e\u003cspan style=\"font-size:16px\"\u003ePW1590 One piece AB Specifications\u003c\/span\u003e\u003c\/p\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1524 x 1143 x 915\u003c\/td\u003e\n\n \u003ctd\u003e 1700 x 1310 x 1318\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1524 x 1143 x 915\u003c\/td\u003e\n\n \u003ctd\u003e 1700 x 1310 x 1348\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926560289093,"sku":"PW1590-1-AB.FT","price":1389.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926560321861,"sku":"PW1590-1-AB.FT.INS","price":1597.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47578_24394.jpg?v=1769007278"},{"product_id":"160-litre-type-ab-air-gap-grp-fire-suppression-water-tank-two-piece-insulated-cat-5","title":"160 Litre Type AB Air Gap GRP Fire Suppression Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2 style=\"margin: 0px; text-indent: 0px;\"\u003e160 Litre Type AB Air Gap GRP Fire Suppression Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp style=\"margin: 0px; text-indent: 0px;\"\u003e\n\nManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e860 x 560 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW160 Two piece AB Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 760 x 460 x 460\u003c\/td\u003e\n\n \u003ctd\u003e 950 x 655 x 809\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 760 x 460 x 460\u003c\/td\u003e\n\n \u003ctd\u003e 675 x 675 x 858\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes my water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003cp\u003e\nAnnual Disinfection Information and Options\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926561075525,"sku":"PW160-2-AB.FT","price":903.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926561108293,"sku":"PW160-2-AB.FT.INS","price":1038.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47610_24486.jpg?v=1769007289"},{"product_id":"160-litre-type-ab-air-gap-grp-fire-water-tank-insulated","title":"160 Litre Type AB Air Gap GRP Fire Water Tank, Insulated","description":"\u003ch2\u003e160 Litre Type AB Air Gap GRP Fire Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003e\n\nOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003e\n\nAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003ePW160 One Piece AB Fire Water Tank Specifications\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 760 x 460 x 460\u003c\/td\u003e\n\n \u003ctd\u003e 950 x 655 x 809\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 760 x 460 x 460\u003c\/td\u003e\n\n \u003ctd\u003e 675 x 675 x 858\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926561141061,"sku":"PW160-1-AB.FT","price":477.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926561173829,"sku":"PW160-1-AB.FT.INS","price":549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47549_24309.jpg?v=1778768927"},{"product_id":"1818-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"1818 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e1818 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003e\n\nManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003e\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard.\u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank.\u003cbr\u003e\nThe assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1320 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003ePW1818-2-AB.FT Fire Water Tank Dimensions\u003c\/h3\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1220 x 1220 x 1220\u003c\/td\u003e\n\n \u003ctd\u003e 1390 x 1390 x 1623\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1220 x 1220 x 1220\u003c\/td\u003e\n\n \u003ctd\u003e 1390 x 1390 x 1653\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926563369285,"sku":"PW1818-2-AB.FT","price":1995.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926563402053,"sku":"PW1818-2-AB.FT.INS","price":2295.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47686_24612.jpg?v=1769007298"},{"product_id":"1818-litre-type-ab-air-gap-grp-fire-water-tank-insulated-cat-5","title":"1818 Litre Type AB Air Gap GRP Fire Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1818 Litre Type AB Air Gap GRP Fire Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. \u003cbr\u003e\n\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003ePW1818 One Piece AB Specifications\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1220 x 1220 x 1220\u003c\/td\u003e\n\n \u003ctd\u003e 1390 x 1390 x 1623\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1220 x 1220 x 1220\u003c\/td\u003e\n\n \u003ctd\u003e 1390 x 1390 x 1653\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1320 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926563434821,"sku":"PW1818-1-AB.FT","price":1503.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926563467589,"sku":"PW1818-1-AB.FT.INS","price":1728.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47579_24400.jpg?v=1769007295"},{"product_id":"187-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"187 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e187 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003c\/p\u003e\n\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003c\/p\u003e\n\n\u003cp\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW187-2-AB Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 750\u003c\/td\u003e\n\n \u003ctd\u003e 675 x 675 x 1075\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 750\u003c\/td\u003e\n\n \u003ctd\u003e 675 x 675 x 1105\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes my water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926564254021,"sku":"PW187-2-AB.FT","price":830.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926564286789,"sku":"PW187-2-AB.FT.INS","price":955.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47611_24489.jpg?v=1769007306"},{"product_id":"187-litre-type-ab-air-gap-grp-fire-water-tank-insulated","title":"187 Litre Type AB Air Gap GRP Fire Water Tank, Insulated","description":"\u003ch2\u003e187 Litre GRP Fire Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003e\n\nManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003e\nOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003e\n\nAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eP\u003c\/strong\u003e\u003cem\u003elease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003ePW187 One Piece AB Fire Water Tank Specifications\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 750\u003c\/td\u003e\n\n \u003ctd\u003e 675 x 675 x 1075\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 750\u003c\/td\u003e\n\n \u003ctd\u003e 675 x 675 x 1105\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes my water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926564319557,"sku":"PW187-1-AB.FT","price":498.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926564352325,"sku":"PW187-1-AB.FT.INS","price":573.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47550_24312.jpg?v=1778768928"},{"product_id":"2000-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"2000 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e2000 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003cbr\u003e\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard.\u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank.\u003cbr\u003e\nThe assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e2100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2000 Two Piece Fire Water Tank Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 2000 x 1000 x 1000\u003c\/td\u003e\n\n \u003ctd\u003e 2180 x 1180 x 1401\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 2000 x 1000 x 1000\u003c\/td\u003e\n\n \u003ctd\u003e 2180 x 1180 x 1430\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926615765317,"sku":"PW2000-2-AB.FT","price":2270.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926615798085,"sku":"PW2000-2-AB.FT.INS","price":2610.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47687_24615.jpg?v=1769007318"},{"product_id":"2001-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"2001 Litre Type AB Air Gap GRP Fire Water Tank, Two Piece Insulated, Cat 5","description":"\u003ch2\u003e2001 Litre GRP Fire Water Tank, AB Air Gap - Insulated (25mm) Cat 5 - Full WRAS Approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost) Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1015 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e\n\n\t\n\n\t\n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2001 Two piece Fire Water Tank Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 2000\u003c\/td\u003e\n\n \u003ctd\u003e 1180 x 1180 x 2403\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 1000 x 2000\u003c\/td\u003e\n\n \u003ctd\u003e 1180 x 1180 x 2433\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926616682821,"sku":"PW2001-2-AB.FT","price":2695.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926616715589,"sku":"PW2001-2-AB.FT.INS","price":3099.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47688_24618.jpg?v=1778768930"},{"product_id":"225-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"225 Litre Type AB Air Gap  GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e225 Litre Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\n Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gelcoat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\n\nNominal capacity = full capacity to top of tank\u003cbr\u003e\n\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e710 x 710 x 1050mm (1000mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003ePW225 Two Piece AB Fire Water Tank Specifications\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 610 x 610 x 610\u003c\/td\u003e\n\n \u003ctd\u003e 795 x 795 x 960\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 610 x 610 x 610\u003c\/td\u003e\n\n \u003ctd\u003e 795 x 795 x 990\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\n\u003cp\u003e\n\nWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eDesigned for easy installation, saving time and money\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eAll work is carried out by CSCS qualified engineers\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eFull tank replacement works available\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eLegionella risk assessments including schematic drawings if required\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eBuilding flush and mains injection\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eCommissioning of booster sets\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eServicing of water softeners and booster sets\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eReplacement of hollow roof struts.\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eInsulating of existing cold water storage tanks\u003c\/span\u003e\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926619402565,"sku":"PW225-2-AB.FT","price":890.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926619435333,"sku":"PW225-2-AB.FT.INS","price":1025.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47612_24492.jpg?v=1769007337"},{"product_id":"225-litre-type-ab-air-gap-grp-fire-water-tank-one-piece-insulated-cat-5","title":"225 Litre Type AB Air Gap GRP Fire Water Tank - One Piece Insulated, Cat 5","description":"\u003ch2\u003e225 Litre Type AB Air Gap GRP Fire Water Storage Tank - One Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e710 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003ePW225 One Piece AB Fire Water Tank Specifications\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 610 x 610 x 610\u003c\/td\u003e\n\n \u003ctd\u003e 795 x 795 x 960\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 610 x 610 x 610\u003c\/td\u003e\n\n \u003ctd\u003e 795 x 795 x 990\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926619697477,"sku":"PW225-1-AB.FT","price":523.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926619730245,"sku":"PW225-1-AB.FT.INS","price":599.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47551_24317.jpg?v=1778768931"},{"product_id":"2250-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"2250 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e2250 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003e\n\nManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions.\u003cbr\u003e\nThe whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1600 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e\n\n\t\u003ch3 style=\"text-align: left;\"\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\t\u003cul\u003e\n\n \u003cli style=\"text-align: left;\"\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n \u003cli style=\"text-align: left;\"\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n \u003cli style=\"text-align: left;\"\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n \u003cli style=\"text-align: left;\"\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n \u003cli style=\"text-align: left;\"\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n \u003cli style=\"text-align: left;\"\u003eManufactured in one piece\u003c\/li\u003e\n\n \u003cli style=\"text-align: left;\"\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n \u003cli style=\"text-align: left;\"\u003e1600 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\t\u003c\/ul\u003e\n\n\t\n\n\t\n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2250 Two Piece Fire Water Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 1000 x 1500\u003c\/td\u003e\n\n \u003ctd\u003e 1702 x 1202 x 1903\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 1000 x 1500\u003c\/td\u003e\n\n \u003ctd\u003e 1702 x 1202 x 1933\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926620123461,"sku":"PW2250-2-AB.FT","price":2231.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926620156229,"sku":"PW2250-2-AB.FT.INS","price":2566.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47689_24621.jpg?v=1769007345"},{"product_id":"2250-litre-type-ab-air-gap-grp-fire-water-tank-insulated-cat-5","title":"2250 Litre Type AB Air Gap GRP Fire Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e2250 Litre Type AB Air Gap GRP Fire Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. \u003cbr\u003e\n\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process colling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1600 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003ePW2250 AB Fire Water Tank Specifications\u003c\/h3\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 1000 x 1500\u003c\/td\u003e\n\n \u003ctd\u003e 1702 x 1202 x 1903\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1500 x 1000 x 1500\u003c\/td\u003e\n\n \u003ctd\u003e 1702 x 1202 x 1933\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\n\u003cp\u003e\n\nWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926620188997,"sku":"PW2250-1-AB.FT","price":1734.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926620221765,"sku":"PW2250-1-AB.FT.INS","price":1995.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47582_24409.jpg?v=1769007342"},{"product_id":"2272-litre-type-ab-air-gap-grp-fire-suppression-water-tank-insulated-cat-5","title":"2272 Litre Type AB Air Gap GRP Fire Suppression Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e2272 Litre Type AB Air Gap GRP Fire Suppression Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e\n\n\t\n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2272 One piece AB Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1828 x 1220 x 1016\u003c\/td\u003e\n\n \u003ctd\u003e 2020 x 1410 x 1729\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1828 x 1220 x 1016\u003c\/td\u003e\n\n \u003ctd\u003e 2020 x 1410 x 1749\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1928 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926620713285,"sku":"PW2272-1-AB.FT","price":1734.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926620746053,"sku":"PW2272-1-AB.FT.INS","price":1995.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47583_24423.jpg?v=1769007349"},{"product_id":"2272-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"2272 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e2272 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003e\n\nManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003e\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank.\u003cbr\u003e\nThe assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1928 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2272-2-AB.FT Fire Water Tank Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1828 x 1220 x 1016\u003c\/td\u003e\n\n \u003ctd\u003e 2020 x 1410 x 1729\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1828 x 1220 x 1016\u003c\/td\u003e\n\n \u003ctd\u003e 2020 x 1410 x 1749\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926620811589,"sku":"PW2272-2-AB.FT","price":2340.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926620844357,"sku":"PW2272-2-AB.FT.INS","price":2691.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47694_24624.jpg?v=1769007353"},{"product_id":"250-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-with-insulation-cat-5","title":"250 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece with Insulation, Cat 5","description":"\u003ch2\u003e250 Litre 2 Piece GRP Fire Water Tank - Insulated (25mm) Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. (Made to order, non-returnable)\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gelcoat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gelcoat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections.\u003cbr\u003e\nAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\n\nNominal capacity = full capacity to top of tank\u003cbr\u003e\n\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet\u003c\/em\u003e\u003cstrong\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1100 x 600 x 1050mm (1000mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003ePW250 Two Piece AB Fire Water Tank Specifications\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 500 x 500\u003c\/td\u003e\n\n \u003ctd\u003e 1160 x 660 x 827\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1000 x 500 x 500\u003c\/td\u003e\n\n \u003ctd\u003e 1160 x 660 x 857\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eDesigned for easy installation, saving time and money\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eAll work is carried out by CSCS qualified engineers\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eFull tank replacement works available\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eLegionella risk assessments including schematic drawings if required\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eBuilding flush and mains injection\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eCommissioning of booster sets\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eServicing of water softeners and booster sets\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eReplacement of hollow roof struts.\u003c\/span\u003e\u003c\/li\u003e\n\n\t\u003cli\u003e\u003cspan style=\"font-size:13.91px\"\u003eInsulating of existing cold water storage tanks\u003c\/span\u003e\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926622613829,"sku":"PW250-2-AB.FT","price":989.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926622646597,"sku":"PW250-2-AB.FT.INS","price":1138.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47613_24495.jpg?v=1778768931"},{"product_id":"2500-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"2500 Litre Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2 style=\"margin: 0px; text-indent: 0px;\"\u003e\n\u003c!--StartFragment--\u003e2500 Litre Type AB Air Gap GRP Fire Suppression Water Tank - Two Piece Insulated, Cat 5- Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra.\u003c\/p\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gelcoat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions.\u003cbr\u003e\n\nThe whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. These two piece tanks allow utilization of the more cost-effective one-piece type tank format, where a considerably more expensive sectional tank would traditionally have been supplied.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e2100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2500 Two Piece Fire Water Tank Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 2000 x 1000 x 1250\u003c\/td\u003e\n\n \u003ctd\u003e 2180 x 1180 x 1626\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 2000 x 1000 x 1250\u003c\/td\u003e\n\n \u003ctd\u003e 2180 x 1180 x 1656\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926625562949,"sku":"PW2501-2-AB.FT","price":2677.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926625595717,"sku":"PW2501-2-AB.FT.INS","price":3078.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47695_24627.jpg?v=1769007372"},{"product_id":"251-litre-type-ab-air-gap-grp-fire-water-tank-insulated-cat-5","title":"251 Litre Type AB Air Gap GRP Fire Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e251 Litre GRP Fire Water Tank - Insulated (25 mm) Full WRAS approval, Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003e\nOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003e\n\nAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003ePW251-1-AB.FT Fire Water Tank Specifications\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 1000\u003c\/td\u003e\n\n \u003ctd\u003e 675 x 675 x 1328\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 1000\u003c\/td\u003e\n\n \u003ctd\u003e 675 x 675 x 1358\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926626840901,"sku":"PW251-1-AB.FT","price":657.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926626873669,"sku":"PW251-1-AB.FT.INS","price":755.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47553_24324.jpg?v=1778768933"},{"product_id":"251-litre-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"251 Litre Type AB Air Gap GRP Fire Water Tank, Two piece, Insulated, Cat 5","description":"\u003ch2\u003e251 Litre GRP Fire Water Tank - Insulated (25 mm) Full WRAS approval, Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003e\nOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003e\nAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW251-2-AB Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 1000\u003c\/td\u003e\n\n \u003ctd\u003e 675 x 675 x 1328\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 1000\u003c\/td\u003e\n\n \u003ctd\u003e 675 x 675 x 1358\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926626906437,"sku":"PW251-2-AB.FT","price":886.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926626939205,"sku":"PW251-2-AB.FT.INS","price":1013.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47614_24498.jpg?v=1778768933"},{"product_id":"2726-litre-type-ab-air-gap-grp-fire-water-tank-insulated-cat-5","title":"2726 Litre Type AB Air Gap GRP Fire Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e2726 Litre Type AB Air Gap GRP Fire Water Tank - Insulated (25 mm) Cat 5 - Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003eManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003c\/p\u003e\n\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions.\u003cbr\u003e\nWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1930 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align:left\"\u003ePW2726-1-AB Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 1828 x 1220 x 1220\u003c\/td\u003e\n\n \u003ctd\u003e 2020 x 1410 x 1623\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 1828 x 1220 x 1220\u003c\/td\u003e\n\n \u003ctd\u003e 2020 x 1410 x 1653\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1 to 3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926627987781,"sku":"PW2726-1-AB.FT","price":1956.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926628020549,"sku":"PW2726-1-AB.FT.INS","price":2249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47585_24432.jpg?v=1769007388"},{"product_id":"3000-litres-type-ab-air-gap-grp-fire-water-tank-two-piece-insulated-cat-5","title":"3000 Litres Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5","description":"\u003ch2\u003e3000 Litres Type AB Air Gap GRP Fire Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003e\n\nManufactured from WRAS approved GRP materials, this fully encapsulated insulation to sides and lid, is a great addition for fire water storage.\u003cbr\u003e\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. (Made to order, non-returnable)\u003c\/p\u003e\n\n\u003cp\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e3100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003ePotable (wholesome water) and Non-potable water storage\u003c\/li\u003e\n\n\t\u003cli\u003eProcess water (including process cooling) applications - 1.5° to +30°c\u003c\/li\u003e\n\n\t\u003cli\u003eProvides mains water protection for fluid category 5 when back flow protection is required\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eApprovals \u0026amp; Certification\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFull WRAS approval\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured to BS EN 13280:2001\u003c\/li\u003e\n\n\t\u003cli\u003eQuality system manufactured in accordance with ISO 9001:2000\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW3000 Two Piece Fire Water Tank Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e \u003c\/td\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 35mm (included)\u003c\/td\u003e\n\n \u003ctd\u003e 3000 x 1000 x 1000\u003c\/td\u003e\n\n \u003ctd\u003e 3202 x 1202 x 1403\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e L x W x H (mm) To suit valves up to 50mm\u003c\/td\u003e\n\n \u003ctd\u003e 3000 x 1000 x 1000\u003c\/td\u003e\n\n \u003ctd\u003e 3202 x 1202 x 1433\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003cp\u003e\nAnnual Disinfection Information and Options\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926633853253,"sku":"PW3000-2-AB.FT","price":3164.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926633886021,"sku":"PW3000-2-AB.FT.INS","price":3635.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47697_24633.jpg?v=1769007398"}],"url":"https:\/\/tanks-direct.co.uk\/collections\/fire-fighting-water-tanks.oembed?page=6","provider":"Tanks Direct","version":"1.0","type":"link"}