{"title":"Drainage Pumps","description":"","products":[{"product_id":"ksb-ama-drainer-301-se-ne-submersible-drainage-pump","title":"KSB Ama Drainer 301 SE\/NE Submersible Drainage Pump","description":"\u003ch2\u003eKSB Ama Drainer 301 SE\/NE Submersible Drainage Pump\u003c\/h2\u003e\n\n\u003cp\u003eThe Ama Drainer 301 SE\/NE is a 1¼'' submersible treated effluent water pump which is suitable to clear effluent containing solids of up to 10 mm.\u003c\/p\u003e\n\n\u003cp\u003eFully floodable, vertical, close-coupled single-stage submersible motor pumps, IP 68, with or without level control, for a maximum immersion depth of 2 m.\u003c\/p\u003e\n\n\u003ch3\u003e\nFeatures\u003c\/h3\u003e\n\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eFlow rate Up to (2.75 l\/s)\u003c\/li\u003e\n\n\t\u003cli\u003eHead Up to 6 m\u003c\/li\u003e\n\n\t\u003cli\u003eTemperature Up to 50 C\u003c\/li\u003e\n\n\t\u003cli\u003eFree passage Up to 10 mm\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with a 2 pin European plug which can be removed and will not affect the warranty \u003c\/li\u003e\n\n\t\u003cli\u003e10m Cable provided\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003e\nApplications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDrainage of pits, shafts, yards and cellars subject to a flooding risk\u003c\/li\u003e\n\n\t\u003cli\u003eExtraction of water from rivers and reservoirs\u003c\/li\u003e\n\n\t\u003cli\u003eDrainage of underground passages\u003c\/li\u003e\n\n\t\u003cli\u003eLowering the surface water level\u003c\/li\u003e\n\n\t\u003cli\u003eMagnetic switch with adjustable, variable level control and anti-over winding device\u003c\/li\u003e\n\n\t\u003cli\u003eStraightforward adaptation to external control system with locking disc.\u003c\/li\u003e\n\n\t\u003cli\u003eEasy to replace cable with plug-type connector\u003c\/li\u003e\n\n\t\u003cli\u003eNo drainage of the discharge pipe with the Integrated swing check valve\u003c\/li\u003e\n\n\t\u003cli\u003eVertical discharge nozzle allows installation in narrow sumps\u003c\/li\u003e\n\n\t\u003cli\u003eProtected against overload which grants Integrated motor protection\u003c\/li\u003e\n\n\t\u003cli\u003eHigh operating reliability with the triple shaft seal lubricated by the barrier fluid makes for high motor reliability. Lubrication of the seal faces in the event of dry running.\u003c\/li\u003e\n\n\t\u003cli\u003eLong service life with the low-weight design and corrosion-proof thanks to high-quality plastic casing. Noise-absorbing, abrasion-proof and impact-resistant.\u003c\/li\u003e\n\n\t\u003cli\u003eEconomic operation optimised the hydraulic systems and motors for large pump output at high efficiency\u003c\/li\u003e\n\n\t\u003cli\u003eFrame-cooled enclosed motor. Permits operation even when motor is not submerged and is protected against overheating, however not advised as a conscious method of operation\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our Submersible pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e","brand":"Direct Pumps \u0026 Tanks","offers":[{"title":"Default Title","offer_id":56703727829317,"sku":"Ama 301","price":149.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/1883_2100.jpg?v=1767798898"},{"product_id":"hs2-4s-230v-submersible-site-drainage-pump","title":"HS2.4S 230v Submersible Site Drainage Pump","description":"\u003ch2\u003eHS2,4S 230v Submersible Site Drainage Pump\u003c\/h2\u003e\n\n\u003cp\u003eThe HS series are 50 mm (2\") and 80 mm (3\") submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where the water contains sand and silt in suspension, thus maintaining performance and reliability. The 750watt pumps feature an oil lifter to maintain seal lubrication during operation in any position.\u003c\/p\u003e\n\n\u003cp\u003eAll models have a 403 stainless-steel shaft, that is fitted with an ultra-hard wearing, double mechanical seal (inboard: silicon carbide-silicon carbide) which runs in an oil chamber - and have a stirring device to reduce blockages. Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications. Supplied with 10 metres of heavy duty, rubber power cable. Available in single-phase only with an optional float switch.\u003c\/p\u003e\n\n\u003cp\u003eThe puddle pump adaptor kit is an optional extra that will convert the HS2.4S to a puddle sucker. It will enable the pumping of water levels down to 10 mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, stainless-steel bolts, nuts and washers.\u003c\/p\u003e\n\n\u003cp\u003eAll 110 volts contractor pumps are factory fitted with 16A plugs and supplied with a hose clip. However, the HS2.4S is available without either to keep the price competitive - see model code HS2.4S(B). This model is supplied only when specifically requested.\u003c\/p\u003e\n\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eHire fleets\u003c\/li\u003e\n\n\t\u003cli\u003eConstruction\u003c\/li\u003e\n\n\t\u003cli\u003eUtilities\u003c\/li\u003e\n\n\t\u003cli\u003eDewatering\u003c\/li\u003e\n\n\t\u003cli\u003eFixed installations\u003c\/li\u003e\n\n\t\u003cli\u003eWater features\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our Submersible Pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e","brand":"Direct Pumps \u0026 Tanks","offers":[{"title":"Default Title","offer_id":56703771214149,"sku":"HS2.4S-M-230","price":403.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/3225_4745.jpg?v=1767799848"},{"product_id":"hs2-4s-110v-automatic-submersible-site-drainage-pump","title":"HS2.4S 110v Automatic Submersible Site Drainage Pump","description":"\u003ch2\u003eHS2.4S 110v Automatic Submersible Site Drainage Pump\u003c\/h2\u003e\n\n\u003cp\u003eThe HS series are 50 mm (2\") and 80 mm (3\") submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where the water contains sand and silt in suspension, thus maintaining performance and reliability. The 750watt pumps feature an oil lifter to maintain seal lubrication during operation in any position.\u003c\/p\u003e\n\n\u003cp\u003eAll models have a 403 stainless steel shaft, that is fitted with an ultra-hard wearing, double mechanical seal (inboard: silicon carbide-silicon carbide) which runs in an oil chamber - and have a stirring device to reduce blockages. Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications. Supplied with 10 metres of heavy duty, rubber power cable. Available in single-phase only with an optional float switch.\u003c\/p\u003e\n\n\u003cp\u003eThe puddle pump adaptor kit is an optional extra that will convert the HS2.4S to a puddle sucker. It will enable the pumping of water levels down to 10 mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, stainless steel bolts, nuts and washers.\u003c\/p\u003e\n\n\u003cp\u003eAll 110 volts contractor pumps are factory fitted with 16A plugs and supplied with a hose clip. However, the HS2.4S is available without either to keep the price competitive - see model code HS2.4S(B). This model is supplied only when specifically requested.\u003c\/p\u003e\n\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eHire fleets\u003c\/li\u003e\n\n\t\u003cli\u003eConstruction\u003c\/li\u003e\n\n\t\u003cli\u003eUtilities\u003c\/li\u003e\n\n\t\u003cli\u003eDewatering\u003c\/li\u003e\n\n\t\u003cli\u003eFixed installations\u003c\/li\u003e\n\n\t\u003cli\u003eWater features\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our Submersible Pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e","brand":"Direct Pumps \u0026 Tanks","offers":[{"title":"Default Title","offer_id":56703771312453,"sku":"HS2.4S-A-110","price":460.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/3226_4747.jpg?v=1767799843"},{"product_id":"hs2-45-230v-automatic-submersible-site-drainage-pump","title":"HS2.45 230v Automatic Submersible Site Drainage Pump","description":"\u003ch2\u003eHS2.45 230v Automatic Submersible Site Drainage Pump\u003c\/h2\u003e\n\n\u003cp\u003eThe HS series are 50 mm (2”) and 80 mm (3”) submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where the water contains sand and silt in suspension, thus maintaining performance and reliability. The 750watt pumps feature an oil lifter to maintain seal lubrication during operation in any position.\u003c\/p\u003e\n\n\u003cp\u003eAll models have a 403 stainless steel shaft, that is fitted with an ultra-hard wearing, double mechanical seal (inboard: silicon carbide-silicon carbide) – which runs in an oil chamber - and have a stirring device to reduce blockages. Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications. Supplied with 10 metres of heavy duty, rubber power cable. Available in single-phase only with an optional float switch.\u003c\/p\u003e\n\n\u003cp\u003eThe puddle pump adaptor kit is an optional extra that will convert the HS2.4S to a puddle sucker. It will enable the pumping of water levels down to 10 mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, stainless steel bolts, nuts and washers.\u003c\/p\u003e\n\n\u003cp\u003eAll 110 volts contractor pumps are factory fitted with 16A plugs and supplied with a hose clip. However, the HS2.4S is available without either to keep the price competitive - see model code HS2.4S(B). This model is supplied only when specifically requested.\u003c\/p\u003e\n\n\u003cp\u003eApplication\u003c\/p\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eHire fleets\u003c\/li\u003e\n\n\t\u003cli\u003eConstruction\u003c\/li\u003e\n\n\t\u003cli\u003eUtilities\u003c\/li\u003e\n\n\t\u003cli\u003eDewatering\u003c\/li\u003e\n\n\t\u003cli\u003eFixed installations\u003c\/li\u003e\n\n\t\u003cli\u003eWater features\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our Submersible pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e","brand":"Direct Pumps \u0026 Tanks","offers":[{"title":"Default Title","offer_id":56703771345221,"sku":"HS2.4S-A-230","price":460.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/3227_4748.jpg?v=1767799847"},{"product_id":"hs2-4s-110v-submersible-site-drainage-pump","title":"HS2.4S 110v Submersible Site Drainage Pump","description":"\u003ch2\u003eHS2,4S 110v Submersible Site Drainage Pump\u003c\/h2\u003e\n\n\u003cp\u003eThe HS series are 50 mm (2”) and 80 mm (3”) submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where the water contains sand and silt in suspension, thus maintaining performance and reliability. The 750watt pumps feature an oil lifter to maintain seal lubrication during operation in any position.\u003c\/p\u003e\n\n\u003cp\u003eAll models have a 403 stainless steel shaft, that is fitted with an ultra-hard wearing, double mechanical seal (inboard: silicon carbide-silicon carbide) – which runs in an oil chamber - and have a stirring device to reduce blockages. Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications. Supplied with 10 metres of heavy duty, rubber power cable. Available in single-phase only with an optional float switch.\u003c\/p\u003e\n\n\u003cp\u003eThe puddle pump adaptor kit is an optional extra that will convert the HS2.4S to a puddle sucker. It will enable the pumping of water levels down to 10 mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, stainless steel bolts, nuts and washers.\u003c\/p\u003e\n\n\u003cp\u003eAll 110 volts contractor pumps are factory fitted with 16A plugs and supplied with a hose clip. However, the HS2.4S is available without either to keep the price competitive - see model code HS2.4S(B). This model is supplied only when specifically requested.\u003c\/p\u003e\n\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eHire fleets\u003c\/li\u003e\n\n\t\u003cli\u003eConstruction\u003c\/li\u003e\n\n\t\u003cli\u003eUtilities\u003c\/li\u003e\n\n\t\u003cli\u003eDewatering\u003c\/li\u003e\n\n\t\u003cli\u003eFixed installations\u003c\/li\u003e\n\n\t\u003cli\u003eWater features\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our Submersible Pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e","brand":"Direct Pumps \u0026 Tanks","offers":[{"title":"Default Title","offer_id":56703771377989,"sku":"HS2.4S-M-110","price":403.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/3228_4755.jpg?v=1767799847"},{"product_id":"hs2-75-230v-automatic-submersible-site-drainage-pump","title":"HS2.75 230v Automatic Submersible Site Drainage Pump","description":"\u003ch2\u003eHS2.75 230v Automatic Submersible Site Drainage Pump\u003c\/h2\u003e\n\n\u003cp\u003eThe HS series are 50 mm (2”) and 80 mm (3”) submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where the water contains sand and silt in suspension, thus maintaining performance and reliability. The 750watt pumps feature an oil lifter to maintain seal lubrication during operation in any position.\u003c\/p\u003e\n\n\u003cp\u003eAll models have a 403 stainless steel shaft, that is fitted with an ultra-hard wearing, double mechanical seal (inboard: silicon carbide-silicon carbide) – which runs in an oil chamber - and have a stirring device to reduce blockages. Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications. Supplied with 10 metres of heavy duty, rubber power cable. Available in single-phase only with an optional float switch.\u003c\/p\u003e\n\n\u003cp\u003eThe puddle pump adaptor kit is an optional extra that will convert the HS2.4S to a puddle sucker. It will enable the pumping of water levels down to 10 mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, stainless steel bolts, nuts and washers.\u003c\/p\u003e\n\n\u003cp\u003eAll 110 volts contractor pumps are factory fitted with 16A plugs and supplied with a hose clip. However, the HS2.4S is available without either to keep the price competitive - see model code HS2.4S(B). This model is supplied only when specifically requested.\u003c\/p\u003e\n\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eHire fleets\u003c\/li\u003e\n\n\t\u003cli\u003eConstruction\u003c\/li\u003e\n\n\t\u003cli\u003eUtilities\u003c\/li\u003e\n\n\t\u003cli\u003eDewatering\u003c\/li\u003e\n\n\t\u003cli\u003eFixed installations\u003c\/li\u003e\n\n\t\u003cli\u003eWater features\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our Submersible Pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e","brand":"Direct Pumps \u0026 Tanks","offers":[{"title":"Default Title","offer_id":56703771410757,"sku":"HS2.75S-A-230","price":643.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/3230_4762.jpg?v=1767799851"},{"product_id":"hs2-75-110v-submersible-site-drainage-pump","title":"HS2.75 110v Submersible Site Drainage Pump","description":"\u003ch2\u003eHS2.75 110v Submersible Site Drainage Pump\u003c\/h2\u003e\n\n\u003cp\u003eThe HS series are 50 mm (2”) and 80 mm (3”) submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where the water contains sand and silt in suspension, thus maintaining performance and reliability. The 750watt pumps feature an oil lifter to maintain seal lubrication during operation in any position.\u003c\/p\u003e\n\n\u003cp\u003eAll models have a 403 stainless steel shaft, that is fitted with an ultra-hard wearing, double mechanical seal (inboard: silicon carbide-silicon carbide) – which runs in an oil chamber - and have a stirring device to reduce blockages. Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications. Supplied with 10 metres of heavy duty, rubber power cable. Available in single-phase only with an optional float switch.\u003c\/p\u003e\n\n\u003cp\u003eThe puddle pump adaptor kit is an optional extra that will convert the HS2.4S to a puddle sucker. It will enable the pumping of water levels down to 10 mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, stainless steel bolts, nuts and washers.\u003c\/p\u003e\n\n\u003cp\u003eAll 110 volts contractor pumps are factory fitted with 16A plugs and supplied with a hose clip. However, the HS2.4S is available without either to keep the price competitive - see model code HS2.4S(B). This model is supplied only when specifically requested.\u003c\/p\u003e\n\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eHire fleets\u003c\/li\u003e\n\n\t\u003cli\u003eConstruction\u003c\/li\u003e\n\n\t\u003cli\u003eUtilities\u003c\/li\u003e\n\n\t\u003cli\u003eDewatering\u003c\/li\u003e\n\n\t\u003cli\u003eFixed installations\u003c\/li\u003e\n\n\t\u003cli\u003eWater features\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our Submersible Pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e","brand":"Direct Pumps \u0026 Tanks","offers":[{"title":"Default Title","offer_id":56703771476293,"sku":"HS2.75S-M-110","price":607.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/3231_4769.jpg?v=1767799853"},{"product_id":"hs2-75-230v-submersible-site-drainage-pump","title":"HS2.75 230v Submersible Site Drainage Pump","description":"\u003ch2\u003eHS2,75 230v Submersible Site Drainage Pump\u003c\/h2\u003e\n\n\u003cp\u003eThe HS series are 50 mm (2”) and 80 mm (3”) submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where the water contains sand and silt in suspension, thus maintaining performance and reliability. The 750watt pumps feature an oil lifter to maintain seal lubrication during operation in any position.\u003c\/p\u003e\n\n\u003cp\u003eAll models have a 403 stainless steel shaft, that is fitted with an ultra-hard wearing, double mechanical seal (inboard: silicon carbide-silicon carbide) – which runs in an oil chamber - and have a stirring device to reduce blockages. Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications. Supplied with 10 metres of heavy duty, rubber power cable. Available in single-phase only with an optional float switch.\u003c\/p\u003e\n\n\u003cp\u003eThe puddle pump adaptor kit is an optional extra that will convert the HS2.4S to a puddle sucker. It will enable the pumping of water levels down to 10 mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, stainless steel bolts, nuts and washers.\u003c\/p\u003e\n\n\u003cp\u003eAll 110 volts contractor pumps are factory fitted with 16A plugs and supplied with a hose clip. However, the HS2.4S is available without either to keep the price competitive - see model code HS2.4S(B). This model is supplied only when specifically requested.\u003c\/p\u003e\n\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eHire fleets\u003c\/li\u003e\n\n\t\u003cli\u003eConstruction\u003c\/li\u003e\n\n\t\u003cli\u003eUtilities\u003c\/li\u003e\n\n\t\u003cli\u003eDewatering\u003c\/li\u003e\n\n\t\u003cli\u003eFixed installations\u003c\/li\u003e\n\n\t\u003cli\u003eWater features\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our Submersible Pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e","brand":"Direct Pumps \u0026 Tanks","offers":[{"title":"Default Title","offer_id":56703771541829,"sku":"HS2.75S-M-230","price":607.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/3232_4770.jpg?v=1767799853"},{"product_id":"hs3-75-110v-automatic-submersible-site-drainage-pump","title":"HS3.75 110v Automatic Submersible Site Drainage Pump","description":"\u003ch2\u003eHS3.75 110v Automatic Submersible Site Drainage Pump\u003c\/h2\u003e\n\n\u003cp\u003eThe HS series are 50 mm (2”) and 80 mm (3”) submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where the water contains sand and silt in suspension, thus maintaining performance and reliability. The 750watt pumps feature an oil lifter to maintain seal lubrication during operation in any position.\u003c\/p\u003e\n\n\u003cp\u003eAll models have a 403 stainless steel shaft, that is fitted with an ultra-hard wearing, double mechanical seal (inboard: silicon carbide-silicon carbide) – which runs in an oil chamber - and have a stirring device to reduce blockages. Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications. Supplied with 10 metres of heavy duty, rubber power cable. Available in single-phase only with an optional float switch.\u003c\/p\u003e\n\n\u003cp\u003eThe puddle pump adaptor kit is an optional extra that will convert the HS2.4S to a puddle sucker. It will enable the pumping of water levels down to 10 mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, stainless steel bolts, nuts and washers.\u003c\/p\u003e\n\n\u003cp\u003eAll 110 volts contractor pumps are factory fitted with 16A plugs and supplied with a hose clip. However, the HS2.4S is available without either to keep the price competitive - see model code HS2.4S(B). This model is supplied only when specifically requested.\u003c\/p\u003e\n\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eHire fleets\u003c\/li\u003e\n\n\t\u003cli\u003eConstruction\u003c\/li\u003e\n\n\t\u003cli\u003eUtilities\u003c\/li\u003e\n\n\t\u003cli\u003eDewatering\u003c\/li\u003e\n\n\t\u003cli\u003eFixed installations\u003c\/li\u003e\n\n\t\u003cli\u003eWater features\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our Submersible Pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e","brand":"Direct Pumps \u0026 Tanks","offers":[{"title":"Default Title","offer_id":56703771574597,"sku":"HS3.75S-A-110","price":653.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/3233_4774.jpg?v=1767799854"},{"product_id":"hs3-75-230v-automatic-submersible-site-drainage-pump","title":"HS3.75 230v Automatic Submersible Site Drainage Pump","description":"\u003ch2\u003eHS3.75 230v Automatic Submersible Site Drainage Pump\u003c\/h2\u003e\n\n\u003cp\u003eThe HS series are 50 mm (2\") and 80 mm (3\") submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where the water contains sand and silt in suspension, thus maintaining performance and reliability. The 750watt pumps feature an oil lifter to maintain seal lubrication during operation in any position.\u003c\/p\u003e\n\n\u003cp\u003eAll models have a 403 stainless steel shaft, that is fitted with an ultra-hard wearing, double mechanical seal (inboard: silicon carbide-silicon carbide) which runs in an oil chamber - and have a stirring device to reduce blockages. Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications. Supplied with 10 metres of heavy duty, rubber power cable. Available in single-phase only with an optional float switch.\u003c\/p\u003e\n\n\u003cp\u003eThe puddle pump adaptor kit is an optional extra that will convert the HS2.4S to a puddle sucker. It will enable the pumping of water levels down to 10 mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, stainless steel bolts, nuts and washers.\u003c\/p\u003e\n\n\u003cp\u003eAll 110 volts contractor pumps are factory fitted with 16A plugs and supplied with a hose clip. However, the HS2.4S is available without either to keep the price competitive - see model code HS2.4S(B). This model is supplied only when specifically requested.\u003c\/p\u003e\n\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eHire fleets\u003c\/li\u003e\n\n\t\u003cli\u003eConstruction\u003c\/li\u003e\n\n\t\u003cli\u003eUtilities\u003c\/li\u003e\n\n\t\u003cli\u003eDewatering\u003c\/li\u003e\n\n\t\u003cli\u003eFixed installations\u003c\/li\u003e\n\n\t\u003cli\u003eWater features\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our Submersible Pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e","brand":"Direct Pumps \u0026 Tanks","offers":[{"title":"Default Title","offer_id":56703771738437,"sku":"HS3.75S-A-230","price":653.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/3234_4778.jpg?v=1767799857"},{"product_id":"hs3-75-110v-submersible-site-drainage-pump-80mm","title":"HS3.75 110v Submersible Site Drainage Pump 80mm","description":"\u003ch2\u003eHS2.75 110v Submersible Site Drainage Pump\u003c\/h2\u003e\n\n\u003cp\u003eThe HS series are 50 mm (2”) and 80 mm (3”) submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S (50 mm 2\") and HS3.75S (80 mm 3\") offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where the water contains sand and silt in suspension, thus maintaining performance and reliability. The 750watt pumps feature an oil lifter to maintain seal lubrication during operation in any position.\u003c\/p\u003e\n\n\u003cp\u003eAll models have a 403 stainless steel shaft, that is fitted with an ultra-hard wearing, double mechanical seal (inboard: silicon carbide-silicon carbide) – which runs in an oil chamber - and have a stirring device to reduce blockages. Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications. Supplied with 10 metres of heavy duty, rubber power cable. Available in single-phase only with an optional float switch.\u003c\/p\u003e\n\n\u003cp\u003eThe puddle pump adaptor kit is an optional extra that will convert the HS2.4S to a puddle sucker. It will enable the pumping of water levels down to 10 mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, stainless steel bolts, nuts and washers.\u003c\/p\u003e\n\n\u003cp\u003eAll 110 volts contractor pumps are factory fitted with 16A plugs and supplied with a hose clip. However, the HS2.4S is available without either to keep the price competitive - see model code HS2.4S(B). This model is supplied only when specifically requested.\u003c\/p\u003e\n\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eHire fleets\u003c\/li\u003e\n\n\t\u003cli\u003eConstruction\u003c\/li\u003e\n\n\t\u003cli\u003eUtilities\u003c\/li\u003e\n\n\t\u003cli\u003eDewatering\u003c\/li\u003e\n\n\t\u003cli\u003eFixed installations\u003c\/li\u003e\n\n\t\u003cli\u003eWater features\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our Submersible Pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e","brand":"Direct Pumps \u0026 Tanks","offers":[{"title":"Default Title","offer_id":56703771803973,"sku":"HS3.75S-M-110","price":618.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/3235_4780.jpg?v=1767799857"},{"product_id":"hs3-75-230v-submersible-site-drainage-pump","title":"HS3.75 230v Submersible Site Drainage Pump","description":"\u003ch2\u003eHS3.75 110v Submersible Site Drainage Pump\u003c\/h2\u003e\n\n\u003cp\u003eThe HS series are 50 mm (2\") and 80 mm (3\") submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where the water contains sand and silt in suspension, thus maintaining performance and reliability. The 750watt pumps feature an oil lifter to maintain seal lubrication during operation in any position.\u003c\/p\u003e\n\n\u003cp\u003eAll models have a 403 stainless steel shaft, that is fitted with an ultra-hard wearing, double mechanical seal (inboard: silicon carbide-silicon carbide) which runs in an oil chamber - and have a stirring device to reduce blockages. Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications. Supplied with 10 metres of heavy duty, rubber power cable. Available in single-phase only with an optional float switch.\u003c\/p\u003e\n\n\u003cp\u003eThe puddle pump adaptor kit is an optional extra that will convert the HS2.4S to a puddle sucker. It will enable the pumping of water levels down to 10 mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, stainless steel bolts, nuts and washers.\u003c\/p\u003e\n\n\u003cp\u003eAll 110 volts contractor pumps are factory fitted with 16A plugs and supplied with a hose clip. However, the HS2.4S is available without either to keep the price competitive - see model code HS2.4S(B). This model is supplied only when specifically requested.\u003c\/p\u003e\n\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eHire fleets\u003c\/li\u003e\n\n\t\u003cli\u003eConstruction\u003c\/li\u003e\n\n\t\u003cli\u003eUtilities\u003c\/li\u003e\n\n\t\u003cli\u003eDewatering\u003c\/li\u003e\n\n\t\u003cli\u003eFixed installations\u003c\/li\u003e\n\n\t\u003cli\u003eWater features\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our Submersible Pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e","brand":"Direct Pumps \u0026 Tanks","offers":[{"title":"Default Title","offer_id":56703771869509,"sku":"HS3.75S-M-230","price":618.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/3236_4785.jpg?v=1767799857"},{"product_id":"hs2-75-110v-automatic-submersible-site-drainage-pump","title":"HS2.75 110v Automatic Submersible Site Drainage Pump","description":"\u003ch2\u003eHS2.75 110v Automatic Submersible Site Drainage Pump\u003c\/h2\u003e\n\n\u003cp\u003eThe HS series are 50 mm (2”) and 80 mm (3”) submersible pumps with motor sizes in 400watt and 750watt. The models HS2.75S and HS3.75S offer increased head and flow capability over the HS2.4S. All models have a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where the water contains sand and silt in suspension, thus maintaining performance and reliability. The 750watt pumps feature an oil lifter to maintain seal lubrication during operation in any position.\u003c\/p\u003e\n\n\u003cp\u003eAll models have a 403 stainless steel shaft, that is fitted with an ultra-hard wearing, double mechanical seal (inboard: silicon carbide-silicon carbide) – which runs in an oil chamber - and have a stirring device to reduce blockages. Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications. Supplied with 10 metres of heavy duty, rubber power cable. Available in single-phase only with an optional float switch.\u003c\/p\u003e\n\n\u003cp\u003eThe puddle pump adaptor kit is an optional extra that will convert the HS2.4S to a puddle sucker. It will enable the pumping of water levels down to 10 mm, maximize utilisation and is very simple to fit. The kit comprises a rubber coated steel bottom plate, stainless steel bolts, nuts and washers.\u003c\/p\u003e\n\n\u003cp\u003eAll 110 volts contractor pumps are factory fitted with 16A plugs and supplied with a hose clip. However, the HS2.4S is available without either to keep the price competitive - see model code HS2.4S(B). This model is supplied only when specifically requested.\u003c\/p\u003e\n\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eHire fleets\u003c\/li\u003e\n\n\t\u003cli\u003eConstruction\u003c\/li\u003e\n\n\t\u003cli\u003eUtilities\u003c\/li\u003e\n\n\t\u003cli\u003eDewatering\u003c\/li\u003e\n\n\t\u003cli\u003eFixed installations\u003c\/li\u003e\n\n\t\u003cli\u003eWater features\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our Submersible Pumps are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e","brand":"Direct Pumps \u0026 Tanks","offers":[{"title":"Default Title","offer_id":56703925846341,"sku":"HS2.75S-A-110","price":643.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/3229_4756.jpg?v=1767799849"}],"url":"https:\/\/tanks-direct.co.uk\/collections\/drainage-pumps.oembed","provider":"Tanks Direct","version":"1.0","type":"link"}