{"title":"AB Cat 5 One Piece GRP Tanks","description":"","products":[{"product_id":"1000-litre-type-ab-air-gap-grp-break-tank-insulated-cat-5","title":"1000 Litre Type AB Air Gap GRP Break Tank, Insulated, Cat 5","description":"\u003ch2\u003e1000 Litre Type AB Air Gap GRP Break Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval.\u003c\/h2\u003e\n\u003cp\u003e\n\nPlease note, this tank is a stocked item. If you require an encapsulated baseboard or Drip tray with the tank, please click on the following link to \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/1000-litre-type-ab-air-gap-grp-water-tank-insulated-25mm-cat-5.html\" target=\"_blank\"\u003ePW1000-1-AB\u003c\/a\u003e\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1000-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 1000 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 1180 x 1IXO-473 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"Default Title","offer_id":56703795953989,"sku":"PW1000-1-AB.ST","price":1100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/circle-item-c928-2-b8c5b9a4.jpg?v=1768235794"},{"product_id":"1125-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1125 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1125 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. \u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1624 x 1015 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1125-1 Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1500 x 500 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n \u003cp\u003e External Dimensions (L x W x H)\u003c\/p\u003e\n \u003c\/td\u003e\n \u003ctd\u003e 1665 x 665 x 1933 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703796674885,"sku":"PW1125-1-AB.50mm.INS","price":1920.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926545215813,"sku":"PW1125-1-AB","price":1677.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4259_20076.jpg?v=1767875694"},{"product_id":"1135-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1135 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1135 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. \u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/p\u003e\n\u003cp\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/p\u003e\n\u003cp\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1624 x 1015 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1135-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1524 x 915 x 812 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1680 x 1080 x 1285 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703796838725,"sku":"PW1135-1-AB.50mm.INS","price":1340.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926546624837,"sku":"PW1135-1-AB","price":1166.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4264_6594.jpg?v=1767800416"},{"product_id":"12000-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"12000 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e12000 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 - Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\n\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e3000 x 2000 x 2000 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW1200 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 3000 x 2000 x 2000 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 3192 x 2192 x 2433 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703797133637,"sku":"PW12000-1-AB.50mm.INS","price":8050.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926547444037,"sku":"PW12000-1-AB","price":6998.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47537_24997.jpg?v=1767875695"},{"product_id":"125-litre-type-ab-air-gap-grp-water-tank-insulated","title":"125 Litre Type AB Air Gap GRP Water Tank, Insulated","description":"\u003ch2\u003e125 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval.\u003c\/h2\u003e\n\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003e\nOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003e\nAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\n\u003cp\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. View more information on our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/water-tanks\/grp-tanks\/two-piece-insulated-grp-break-tank\/c927\"\u003etwo piece GRP tank range\u003c\/a\u003e here.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003cp style=\"text-align:left\"\u003ePW125-1-AB Specifications\u003c\/p\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e 500 x 500 x 500 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n\n \u003ctd\u003e 690 x 690 x 889 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, please click \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703797723461,"sku":"PW125-1-AB.50mm.INS","price":512.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926549508421,"sku":"PW125-1-AB","price":445.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43471_20003.jpg?v=1767875696"},{"product_id":"1364-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1364 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1364 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1470 x 1192 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1364-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1370 x 1092 x 915 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1570 x 1290 x 1388 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703797952837,"sku":"PW1364-1-AB.50mm.INS","price":1420.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926553833797,"sku":"PW1364-1-AB","price":1234.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4297_6741.jpg?v=1767800449"},{"product_id":"1501-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1501 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1501 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm.\u003c\/p\u003e\n\u003cp\u003eA float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra\u003c\/p\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1501 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 1000 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 1180 x 1973 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703798411589,"sku":"PW1501-1-AB.50mm.INS","price":1845.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926560092485,"sku":"PW1501-1-AB","price":1605.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4320_6860.jpg?v=1767800465"},{"product_id":"1818-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1818 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1818 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. \u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1320 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePW1818-1-AB Dimensions\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1220 x 1220 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1390 x 1390 x 1688 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703799099717,"sku":"PW1818-1-AB.50mm.INS","price":1728.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926563565893,"sku":"PW1818-1-AB","price":1503.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4352_6998.jpg?v=1767800492"},{"product_id":"187-litre-type-ab-air-gap-grp-water-tank-insulated","title":"187 Litre Type AB Air Gap GRP Water Tank, Insulated","description":"\u003ch2\u003e187 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval.\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP\u003c\/strong\u003e\u003cem\u003elease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW187-1-AB Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 500 x 500 x 750 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 690 x 690 x 1139 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes my water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703799329093,"sku":"PW187-1-AB.50mm.INS","price":573.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926564450629,"sku":"PW187-1-AB","price":498.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43472_20007.jpg?v=1767875698"},{"product_id":"225-litre-type-ab-air-gap-grp-water-tank-one-piece-insulated-cat-5","title":"225 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5","description":"\u003ch2\u003e225 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e710 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW225-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Model\u003c\/td\u003e\n \u003ctd\u003e PW225-1-AB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n \u003ctd\u003e 610 x 610 x 610 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd\u003e 805 x 805 x 1029 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703800049989,"sku":"PW225-1-AB.50mm.INS","price":599.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926619631941,"sku":"PW225-1-AB","price":523.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/42058_19925.jpg?v=1767875699"},{"product_id":"2272-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"2272 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e2272 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1928 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW2272-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1828 x 1220 x 1016 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2020 x 1410 x 1489 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703800541509,"sku":"PW2272-1-AB.50mm.INS","price":1995.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926620909893,"sku":"PW2272-1-AB","price":1734.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4398_7194.jpg?v=1767800540"},{"product_id":"2500-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"2500 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e2500 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2500 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 1000 x 1250 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2202 x 1202 x 1723 mm \u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703800836421,"sku":"PW2501-1-AB.50mm.INS","price":2417.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926625857861,"sku":"PW2501-1-AB","price":2102.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4421_7310.jpg?v=1767800558"},{"product_id":"251-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"251 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e251 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval, Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW251 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Specifications (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 500 x 500 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Specifications (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 690 x 690 x 1389 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703801393477,"sku":"PW251-1-AB.50mm.INS","price":755.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926627004741,"sku":"PW251-1-AB","price":657.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43473_20010.jpg?v=1767875700"},{"product_id":"305-litre-type-ab-air-gap-grp-water-tank-one-piece-insulated-cat-5","title":"305 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5","description":"\u003ch2\u003e305 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW305-1-AB Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 500 x 500 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 690 x 690 x 1609 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703802048837,"sku":"PW305-1-AB.50mm.INS","price":945.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926636376389,"sku":"PW305-1-AB","price":822.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43475_20013.jpg?v=1767875700"},{"product_id":"3185-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"3185 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e3185 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. \u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2540 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW3185-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2440 x 1220 x 1070 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2610 x 1410 x 1543 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703802212677,"sku":"PW3185-1-AB50mmINS","price":2760.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926637130053,"sku":"PW3185-1-AB","price":2401.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4471_7543.jpg?v=1767800600"},{"product_id":"338-litre-type-ab-air-gap-grp-water-tank-one-piece-insulated-cat-5","title":"338 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5","description":"\u003ch2\u003e338 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e710 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:750px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW338-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Model\u003c\/td\u003e\n \u003ctd\u003e PW338-1-AB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n \u003ctd\u003e 610 x 610 x 910 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd\u003e 805 x 805 x 1315 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703802474821,"sku":"PW338-1-AB.50mm.INS","price":867.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926639096133,"sku":"PW338-1-AB","price":754.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/42131_19926.jpg?v=1767875701"},{"product_id":"375-litre-type-ab-air-gap-grp-water-tank-one-piece-insulated-cat-5","title":"375 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5","description":"\u003ch2\u003e375 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\t\u003cli\u003eNominal capacity = full capacity to top of tank\u003c\/li\u003e\n\t\u003cli\u003eActual capacity = float level\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW375-1-AB Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 500 x 500 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 690 x 690 x 1889 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e600 x 600 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003cp\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/p\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703804506437,"sku":"PW375-1-AB.50mm.INS","price":928.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926643421509,"sku":"PW375-1-AB","price":805.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43476_20016.jpg?v=1767875702"},{"product_id":"4500-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"4500 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e4500 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW4500 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2500 x 1500 x 1200 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2694 x 1694 x 1673mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703804768581,"sku":"PW4500-1-AB50mmINS","price":3296.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926649712965,"sku":"PW4500-1-AB","price":2866.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4524_7795.jpg?v=1767800654"},{"product_id":"5625-litre-type-ab-air-gap-grp-water-tank-insulated","title":"5625 Litre Type AB Air Gap GRP Water Tank, Insulated","description":"\u003ch2\u003e5625 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval.\u003c\/h2\u003e\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003c\/p\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank, if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW5625 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2500 x 1500 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2694 x 1694 x 1973 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703805817157,"sku":"PW5625-1-AB.50mm.INS","price":3865.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926661968197,"sku":"PW5625-1-AB","price":3356.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43682_20103.jpg?v=1767875704"},{"product_id":"6001-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"6001 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e6001 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 - Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Float Valve Housing: Suitable up to 35 mm Equilibrium Float. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003eGrey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections which are then assembled once the restriction has passed. In a nutshell and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tanks construction and overall strength of the base. This will benefit the tank if its on uneven surfaces or positioned raise supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eTank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2100 x 2100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW6001 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 2000 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2192 x 2192 x 1973 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703806898501,"sku":"PW6001-1-AB.50mm.INS","price":4472.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926667571525,"sku":"PW6001-1-AB","price":3888.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4612_8127.jpg?v=1767800719"},{"product_id":"650-litre-type-ab-air-gap-grp-break-tank-insulated-cat-5","title":"650 Litre Type AB Air Gap GRP Break Tank, Insulated, Cat 5","description":"\u003ch2\u003e650 Litre Type AB Air Gap GRP Break Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003e\nOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003e\nAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\n\nNominal capacity = full capacity to top of tank\u003cbr\u003e\n\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raise supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied as standard with two built-in fixing pads, positioned at opposite ends of the tank.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e1600 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e\n\n\t\u003ch3 style=\"text-align:left\"\u003ePW650-1-AB Dimensions\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1067 x 610 x 1000 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 1255 x 805 x 1419 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003e\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the Clean and Disinfection, please \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eclick here\u003c\/a\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703807357253,"sku":"PW650-1-AB50mmINS","price":1128.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926670684485,"sku":"PW650-1-AB","price":980.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4627_19167.jpg?v=1767875705"},{"product_id":"680-litre-type-ab-air-gap-grp-water-tank-one-piece-insulated-cat-5-wras","title":"680 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5, WRAS","description":"\u003ch2\u003e680 Litre GRP Water Tanks - Insulated (25 mm)\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW680 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1220 x 915 x 610 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1395 x 1087 x 1029 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1320 x 1015 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703807684933,"sku":"PW680-1-AB.50mm.INS","price":915.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926671667525,"sku":"PW680-1-AB","price":794.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43191_19964.jpg?v=1767875705"},{"product_id":"750-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"750 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e750 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1600 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW750-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1500 x 1000 x 500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1702 x 1202 x 916 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703809487173,"sku":"PW750-1-AB.50mm.INS","price":1055.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926674747717,"sku":"PW750-1-AB","price":915.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4646_8285.jpg?v=1767800767"},{"product_id":"909-litre-type-ab-air-gap-grp-break-tank-insulated-cat-5","title":"909 Litre Type AB Air Gap GRP Break Tank, Insulated, Cat 5","description":"\u003ch2\u003e909 Litre Type AB Air Gap GRP Break Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank, to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW909-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1168 x 890 x 890 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1330 x 1050 x 1309 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"50mm Insulation","offer_id":56703810076997,"sku":"PW909-1-AB.50mm.INS","price":1080.0,"currency_code":"GBP","in_stock":true},{"title":"25mm Insulation (Standard)","offer_id":56926683332933,"sku":"PW909-1-AB.","price":939.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4690_19970.jpg?v=1767875706"},{"product_id":"1050-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1050 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1050 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003eNominal capacity shown\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1050-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1500 x 500 x 1400 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1665 x 665 x 1833 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003e\n\nWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926542561605,"sku":"PW1050-1-AB","price":1610.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926542594373,"sku":"PW1050-1-AB.50mm.INS","price":1852.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4251_20058.jpg?v=1778768923"},{"product_id":"1220-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1220 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1220 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\n\n\t\u003ch3 style=\"text-align:left\"\u003ePW1220-1-AB Data Sheet\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 1000 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 1180 x 1692 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926548787525,"sku":"PW1220-1-AB","price":1235.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926548820293,"sku":"PW1220-1-AB.50mm.INS","price":1420.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4280_6666.jpg?v=1769007240"},{"product_id":"1590-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1590 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1590 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. The whole tank is then coated with a tack free grey polyester gel coat layer. This ensures that the tanks are suitable for all locations and weather conditions, and can be located outdoors as standard. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1624 x 1243 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1590-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1524 x 1143 x 915 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1700 x 1310 x 1388 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926560485701,"sku":"PW1590-1-AB","price":1389.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926560518469,"sku":"PW1590-1-AB.50mm.INS","price":1597.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4331_6907.jpg?v=1769007279"},{"product_id":"160-litre-type-ab-air-gap-grp-water-tank-insulated","title":"160 Litre Type AB Air Gap GRP Water Tank, Insulated","description":"\u003ch2\u003e160 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW160 One piece AB Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e \u003c\/td\u003e\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e L x W x H (mm)\u003c\/td\u003e\n \u003ctd\u003e 760 x 460 x 460\u003c\/td\u003e\n \u003ctd\u003e 950 x 655 x 879\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926561337669,"sku":"PW160-1-AB","price":477.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926561370437,"sku":"PW160-1-AB.50mm.INS","price":549.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/35167_19924.jpg?v=1778768927"},{"product_id":"2250-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"2250 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e2250 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. \u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1600 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW2250 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1500 x 1000 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1702 x 1202 x 1973 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003e\n\nWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926620352837,"sku":"PW2250-1-AB","price":1734.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926620385605,"sku":"PW2250-1-AB.50mm.INS","price":1995.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4388_7151.jpg?v=1769007339"},{"product_id":"250-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"250 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e250 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003e\n\nPlease note, the 250 Litre stock tank is available as the 25 mm insulation Only.\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW250-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 500 x 500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 680 x 916 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Postage)","offer_id":56926623924549,"sku":"PW250-1-AB","price":567.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926623957317,"sku":"PW250-1-AB.50mm.INS","price":654.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4408_7241.jpg?v=1769007359"},{"product_id":"2726-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"2726 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e2726 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 - Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1930 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW2726-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1828 x 1220 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2020 x 1410 x 1693 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926628315461,"sku":"PW2726-1-AB","price":1956.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926628348229,"sku":"PW2726-1-AB.50mm.INS","price":2249.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4438_7383.jpg?v=1769007386"},{"product_id":"3001-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"3001 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e3001 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e3100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW3001 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 1000 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2202 x 1202 x 1973 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926636179781,"sku":"PW3001-1-AB","price":2325.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926636212549,"sku":"PW3001-1-AB.50mm.INS","price":2672.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4457_7475.jpg?v=1769007404"},{"product_id":"340-litre-type-ab-air-gap-grp-water-tank-one-piece-insulated-cat-5","title":"340 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5","description":"\u003ch2\u003e340Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003eGrey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1015 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW340-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 915 x 610 x 610 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1090 x 785 x 1021 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926639587653,"sku":"PW340-1-AB","price":609.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926639620421,"sku":"PW340-1-AB.50mm.INS","price":703.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4480_7583.jpg?v=1769007444"},{"product_id":"3636-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"3636 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e3636 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for Two piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in bolt up sections, allowing easy access and assembly\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2540 x 1320 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW3636-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2440 x 1220 x 1220 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2610 x 1410 x 1693 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean? Is it being installed?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926642995525,"sku":"PW3636-1-AB","price":2390.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926643028293,"sku":"PW3636-1-AB50mmINS","price":2750.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4493_7646.jpg?v=1769007454"},{"product_id":"4001-litre-type-ab-air-gap-grp-water-tank-insulated","title":"4001 Litre Type AB Air Gap GRP Water Tank, Insulated","description":"\u003ch2\u003e4001 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank. After the steel reinforcement is fitted, the GRP outer skin is then applied. This ensures that the reinforcement is fully encapsulated and protected from external conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW4001 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 1000 x 2000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2202 x 1202 x 2475 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926647451973,"sku":"PW4001-1-AB","price":3268.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926647484741,"sku":"PW4001-1-AB.50mm.INS","price":3760.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43681_20098.jpg?v=1778768937"},{"product_id":"454-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"454 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e454 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003eGrey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if its on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW454-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1067 x 610 x 710 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1255 x 805 x 1129 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926650237253,"sku":"PW454-1-AB","price":763.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926650270021,"sku":"PW454-1-AB.50mm.INS","price":879.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4541_19689.jpg?v=1778768938"},{"product_id":"500-litre-grp-water-tank-type-ab-air-gap-one-piece-insulated-cat-5","title":"500 Litre GRP Water Tank, Type AB Air Gap - One Piece Insulated, Cat 5","description":"\u003ch2\u003e500 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003eGrey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW501-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 500 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 680 x 1416 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926654792005,"sku":"PW501-1-AB","price":843.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926654824773,"sku":"PW501-1-AB50mmINS","price":950.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/21475_20033.jpg?v=1778768939"},{"product_id":"500-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"500 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e500 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003eGrey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\n\n\t\u003ch3 style=\"text-align:left\"\u003ePW500-1-AB Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 1000 x 500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 1180 x 916 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926656725317,"sku":"PW500-1-AB","price":807.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926656758085,"sku":"PW500-1-AB50mmINS","price":928.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4553_7894.jpg?v=1769007522"},{"product_id":"570-litres-type-ab-air-gap-grp-water-tank-one-piece-insulated-cat-5","title":"570 Litres Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5","description":"\u003ch2\u003e570 Litres Type AB Air Gap GRP Water Tank - Two Piece Insulated, Cat 5 Full WRAS approval.\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements.\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Delivery generally 2 weeks. (Made to order, non-returnable). Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These break tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 1600 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW570-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 990 x 760 x 760 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1150 x 925 x 1179 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926662525253,"sku":"PW570-1-AB","price":737.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926662558021,"sku":"PW570-1-AB.50mm.INS","price":849.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/42059_19941.jpg?v=1778768941"},{"product_id":"600-litre-grp-water-tank-type-ab-air-gap-one-piece-insulated-cat-5","title":"600 Litre GRP Water Tank, Type AB Air Gap - One Piece Insulated, Cat 5","description":"\u003ch2\u003e601 Litre GRP Water Tanks - Insulated (25 mm) \u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eStand and baseboards please allow a longer lead time for delivery\u003cbr\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in the prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections.\u003cbr\u003eAll the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW601-1-AB Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 500 x 1200 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 680 x 1616 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1015 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926666228037,"sku":"PW601-1-AB","price":936.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926666260805,"sku":"PW601-1-AB.50mm.INS","price":1076.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43545_20036.jpg?v=1778768941"},{"product_id":"712-litre-type-ab-air-gap-grp-water-tank-one-piece-insulated-cat-5","title":"712 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5","description":"\u003ch2\u003e712 Litre Type AB Air Gap GRP Water Tank - One Piece Insulated, Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. View more information on our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/water-tanks\/grp-tanks\/two-piece-insulated-grp-break-tank\/c927\"\u003etwo piece GRP tank range\u003c\/a\u003e here.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item. If an encapsulated baseboard is required, please note it will add 30 mm to the external height of the tank.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW712 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e\n \u003cp\u003e Internal Dimensions\u003c\/p\u003e\n \u003c\/td\u003e\n \u003ctd\u003e 1090 x 860 x 760 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003ctd\u003e\n \u003cp\u003e 1278 x 1035 x 1185 mm\u003c\/p\u003e\n \u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1190 x 960 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\t\u003cli\u003eSee 'more images' tab for an example image (actual may vary)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, please click \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926673109317,"sku":"PW712-1-AB","price":793.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926673142085,"sku":"PW712-1-AB.50mm.INS","price":913.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43192_19967.jpg?v=1778768838"},{"product_id":"7500-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"7500 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e7500 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 - Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2600 x 2100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW7500 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2500 x 2000 x 1500 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2692 x 2192 x 1973 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926675403077,"sku":"PW7500-1-AB","price":4425.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926675435845,"sku":"PW7500-1-AB.50mm.INS","price":5090.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4655_8327.jpg?v=1769007635"},{"product_id":"751-litre-grp-water-tank-type-ab-air-gap-one-piece-insulated-cat-5","title":"751 Litre GRP Water Tank, Type AB Air Gap - One Piece Insulated, Cat 5","description":"\u003ch2\u003e751 Ltr GRP Water Tank - Insulated (25 mm)\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1015 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003e \u003c\/p\u003e\n\n\t\u003ch3 style=\"text-align:left\"\u003ePW751 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 1000 x 750 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 1180 x 1166 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926677958981,"sku":"PW751-1-AB","price":814.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926677991749,"sku":"PW751-1-AB.50mm.INS","price":939.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43613_20049.jpg?v=1778768839"},{"product_id":"90-litre-type-ab-air-gap-grp-water-tank-insulated","title":"90 Litre Type AB Air Gap GRP Water Tank, Insulated","description":"\u003ch2\u003e90 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW90 One piece AB Specifications\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e \u003c\/td\u003e\n \u003ctd\u003e Internal Dimensions\u003c\/td\u003e\n \u003ctd\u003e External Dimensions\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e L x W x H (mm)\u003c\/td\u003e\n \u003ctd\u003e 610 x 305 x 510\u003c\/td\u003e\n \u003ctd\u003e 790 x 500 x 919\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926682153285,"sku":"PW90-1-AB","price":437.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926682186053,"sku":"PW90-1-AB.50mm.INS","price":504.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/35165_19909.jpg?v=1778768840"},{"product_id":"9000-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"9000 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e9000 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 - Full WRAS approval\u003c\/h2\u003e\n\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003e\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003e\nAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003e\nNominal capacity = full capacity to top of tank\u003cbr\u003e\nActual capacity = float level\u003c\/p\u003e\n\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\n\t\u003cli\u003e3000 x 2000 x 1500 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\n\t\u003ccaption\u003e \n\n\t\u003ch3 style=\"text-align: left;\"\u003ePW9000 Specifications\u003c\/h3\u003e\n\n\t\u003c\/caption\u003e\n\n\t\u003ctbody\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 3000 x 2000 x 1500 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n \u003ctr\u003e\n\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n\n \u003ctd\u003e 3192 x 2192 x 1933 mm\u003c\/td\u003e\n\n \u003c\/tr\u003e\n\n\t\u003c\/tbody\u003e\n\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1–3 years\u003c\/li\u003e\n\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56926683201861,"sku":"PW9000-1-AB","price":5670.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56926683234629,"sku":"PW9000-1-AB.50mm.INS","price":6520.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/47968_24998.jpg?v=1778768840"},{"product_id":"1000-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1000 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1000 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nPlease note, the 1000 Litre stock tank is available as the 25 mm insulation Only. Please see the following link for the stocked tank \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/1000-litre-type-ab-air-gap-grp-break-water-tank-insulated-cat-5.html\" target=\"_blank\"\u003ePW1000-1-AB.\u003c\/a\u003e\u003cbr\u003e50 mm insulation, support Stand and baseboards please allow 2 weeks for delivery\u003cbr\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering.\u003cbr\u003eAfter the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1000-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 1000 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 1180 x 1IXO-473 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56935610646853,"sku":"PW1000-1-AB","price":1100.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56935610679621,"sku":"PW1000-1-AB50mmINS","price":1223.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4237_20051.jpg?v=1778768885"},{"product_id":"1500-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"1500 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e1500 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5\u003c\/h2\u003e\n\u003cp\u003eTank comes with float valve housing to suit drop arm equilibrium float valves up to 35 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 54 mm is available as an optional extra. Float Valve Housing: Suitable up to 35 mm Equilibrium Float. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003c\/p\u003e\n\u003cp\u003e\n\nAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1600 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW1500-1-AB Dimensions\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1500 x 1000 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1702 x 1202 x 1IXO-473 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003e\n\nWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56935616348485,"sku":"PW1500-1-AB","price":1356.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56935616381253,"sku":"PW1500-1-AB.50mm.INS","price":1560.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4310_6802.jpg?v=1769007263"},{"product_id":"2000-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"2000 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e2000 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 - Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Float Valve Housing: Suitable up to 35 mm Equilibrium Float. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval Grey colour as standard (other RAL or BS colours are available at additional cost)\u003cbr\u003eOnly materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available. All internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e2100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align:left\"\u003ePW2000 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2000 x 1000 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 2202 x 1202 x 1IXO-473 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3\u003eAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56935621034309,"sku":"PW2000-1-AB","price":1689.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56935621067077,"sku":"PW2000-1-AB.50mm.INS","price":1942.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4370_7070.jpg?v=1769007312"},{"product_id":"2001-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"2001 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e2000 Litre GRP Water Tank\u003c\/h2\u003e\n\u003cp\u003eManufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Full WRAS approval. Grey colour as standard (other RAL or BS colours are available at additional cost) Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. After the CFC free PU foam insulation is fitted, the GRP outer skin is then applied. This ensures that the insulation is fully encapsulated and protected from external conditions.\u003cbr\u003eWhere access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNominal capacity shown\u003c\/strong\u003e\u003cbr\u003eNominal capacity = full capacity to top of tank\u003cbr\u003eActual capacity = float level\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: valves and fittings are supplied loose (items can be fitted to the tank for an additional fee).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe tank is supplied with 2 low level connection pads, on the opposite end to the inlet.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli\u003e1015 x 710 x 1050 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003cp style=\"text-align:left\"\u003ePW2001 Specifications\u003c\/p\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1000 x 1000 x 2000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 1180 x 1180 x 2IXO-473 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDoes your water tank need a clean?\u003c\/h3\u003e\n\u003cp\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003cp\u003eAnnual Disinfection Information and Options\u003c\/p\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56935626735941,"sku":"PW2001-1-AB","price":2256.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56935626768709,"sku":"PW2001-1-AB.50mm.INS","price":2595.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/43680_20089.jpg?v=1778768885"},{"product_id":"3000-litre-type-ab-air-gap-grp-water-tank-insulated-cat-5","title":"3000 Litre Type AB Air Gap GRP Water Tank, Insulated, Cat 5","description":"\u003ch2\u003e3000 Litre Type AB Air Gap GRP Water Tank - Insulated (25 mm) Cat 5 Full WRAS approval\u003c\/h2\u003e\n\u003cp\u003e\n\nTank comes with float valve housing to suit drop arm equilibrium float valves up to 50 mm. A float valve housing that is suitable for equilibrium drop arm float valves up to 35 mm is available as an optional extra. Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing processes. This combination ensures that these tanks are of the highest quality available.\u003cbr\u003eAll internal surfaces, including the lid, have an Isophthalic white gel coat layer which provides a clinical smooth surface which will not support the growth of microbiological organisms. This gel coat layer is reinforced by the main GRP laminate, which provides the main structure of the tank body. The materials used are of the highest quality and applied with exacting production standards to assist in prevention of osmotic blistering. Further reinforcement is provided by square section steel tubing with fully welded corner joints. Steel reinforcement ensures that the softening and general deterioration encountered with timber supports is avoided, thus providing full structural reinforcement for the life of the tank.\u003cbr\u003eAfter the CFC free PU foam insulation and the steel reinforcement are fitted, the GRP outer skin is then applied. This ensures that both insulation and reinforcement are fully encapsulated and protected from external conditions. Where access is a limiting factor and our one piece GRP tanks are unsuitable, a two piece tank could do the trick. These tanks are manufactured in two or more horizontally split sections, which are then assembled once the restriction has passed. In a nutshell, and a one piece tank in two or more bolt together sections. All the components including sealant and fixings for the joint flange are supplied with the tank. The assembly of this range of products could not be easier and should not prove difficult for any competent mechanical services engineer.\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e\u003cem\u003eThe Encapsulated Baseboard will come moulded into the internal base of the tank to become part of the tank's construction and overall strength of the base. This will benefit the tank if it's on uneven surfaces or positioned on raised supports. It will not come supplied as a separate item\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ch3 style=\"line-height: 19px;\"\u003e\n\u003cbr\u003e\n\nOptional steel water tank support Stand\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli style=\"line-height: 19px;\"\u003eSteel water tank support Stand suitable for raising the tank, allowing pump sets or other equipment to be positioned underneath.\u003c\/li\u003e\n\t\u003cli style=\"line-height: 19px;\"\u003eAllows maximum use of the available footprint.\u003c\/li\u003e\n\t\u003cli style=\"line-height: 19px;\"\u003eIncreases the static head for applications where pressurised feed to equipment is advantageous.\u003c\/li\u003e\n\t\u003cli style=\"line-height: 19px;\"\u003eSuitable for One piece tanks.\u003c\/li\u003e\n\t\u003cli style=\"line-height: 19px;\"\u003ePainted Grey Primer finish.\u003c\/li\u003e\n\t\u003cli style=\"line-height: 19px;\"\u003eManufactured in one piece\u003c\/li\u003e\n\t\u003cli style=\"line-height: 19px;\"\u003eSupplied with ply boarding to provide a flat, solid surface for the tank base\u003c\/li\u003e\n\t\u003cli style=\"line-height: 19px;\"\u003e3100 x 1100 x 1100 mm (1000 mm clearance to underside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"line-height: 19px;\"\u003e \u003c\/p\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\" style=\"wiIXO-DTh:500px\"\u003e\n\t\u003ccaption\u003e\n\t\u003ch3 style=\"text-align: left;\"\u003ePW3000 Specifications\u003c\/h3\u003e\n\t\u003c\/caption\u003e\n\t\u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003e Internal Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 3000 x 1000 x 1000 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003e External Dimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e 3202 x 1202 x 1IXO-473 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n\t\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eDelivery\u003c\/h3\u003e\n\u003cp\u003eAll our GRP tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and\/or machinery to help unload the tank\/s from the delivery vehicle.\u003c\/p\u003e\n\u003cp\u003eIf you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.\u003c\/p\u003e\n\n\u003ch3\u003eDOES YOUR WATER TANK NEED A CLEAN?\u003c\/h3\u003e\n\u003cp style=\"line-height: 19px;\"\u003eWater can pose a number of risks if not maintained correctly, with this in mind we can offer the below service for your GRP tanks.\u003c\/p\u003e\n\u003ch3 style=\"line-height: 19px;\"\u003e\n\u003cbr\u003e\n\nAnnual Disinfection Information and Options\u003c\/h3\u003e\n\u003cul\u003e\n\t\u003cli\u003eDesigned for easy installation, saving time and money\u003c\/li\u003e\n\t\u003cli\u003eWe can offer monthly, yearly and fixed priced packages ranging from 1-3 years\u003c\/li\u003e\n\t\u003cli\u003eAll work is carried out by CSCS qualified engineers\u003c\/li\u003e\n\t\u003cli\u003eTank upgrade works available, bringing the old tanks up to current regulations\u003c\/li\u003e\n\t\u003cli\u003eFull tank replacement works available\u003c\/li\u003e\n\t\u003cli\u003eLegionella risk assessments including schematic drawings if required\u003c\/li\u003e\n\t\u003cli\u003eMicrobiology analysis - water sampling via UKAS approved laboratories\u003c\/li\u003e\n\t\u003cli\u003eBuilding flush and mains injection\u003c\/li\u003e\n\t\u003cli\u003eCommissioning of booster sets\u003c\/li\u003e\n\t\u003cli\u003eServicing of water softeners and booster sets\u003c\/li\u003e\n\t\u003cli\u003eReplacement of hollow roof struts.\u003c\/li\u003e\n\t\u003cli\u003eInsulating of existing cold water storage tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor more information regarding the annual disinfection, visit our \u003ca href=\"https:\/\/www.tanks-direct.co.uk\/grp-commissioning\"\u003eGRP commissioning page\u003c\/a\u003e now\u003c\/p\u003e","brand":"Purewater","offers":[{"title":"25mm Insulation (Standard)","offer_id":56935629521221,"sku":"PW3000-1-AB","price":2396.0,"currency_code":"GBP","in_stock":true},{"title":"50mm Insulation","offer_id":56935629553989,"sku":"PW3000-1-AB.50mm.INS","price":2755.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/files\/4447_7427.jpg?v=1769007395"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/4595\/6165\/collections\/4370_7070.jpg?v=1783929255","url":"https:\/\/tanks-direct.co.uk\/collections\/ab-cat-5-one-piece-grp-tanks.oembed?page=3","provider":"Tanks Direct","version":"1.0","type":"link"}